USING CPR TAYLOR
Setup Make sure your manikin and monitor both have batteries installed before continuing with these steps.
Understanding Feedback Here’s a quick guide to monitor feedback.
IMPORTANT NOTE! If you have a brand new manikin, the serial number on the back of the manikin must match the one on the back of the monitor! If you are connecting a replacement monitor, follow the reset instructions on page 25.
1. Make sure your manikin and monitor both have batteries installed. 2. Turn on the monitor and manikin. 3. Choose the mode in which you will be training. • By default, the monitor starts on Adult, Standard mode. • To choose a different mode, press the mode button to cycle through the options • Adult, Standard: solid light under adult icon • Adult, Blind blinking light under adult icon • Child, Standard: solid light under child icon • Child, Blind: blinking light under child icon 4. Start your CPR training!
QUALITY CPR Green in the center ovals means you’re hitting the right rate, depth & recoil!
NEEDS WORK Red in the upper or lower lights means a few different things. See below!
TOO SHALLOW
IDEAL RATE
IDEAL DEPTH & RECOIL
TOO FAST
TOO DEEP
TOO SLOW
NEEDS MORE RECOIL
TEST REPORT Appears 10 seconds after session ends.
22
23
CPR TAYLOR
Made with FlippingBook Digital Proposal Creator