Whitworths Marine & Leisure 2024 Winter Bargain Book

ANTIFOUL / PRIMERS & UNDERCOATS

*Orders containing Dangerous Goods incur a $75.00 surcharge and may increase delivery time.

PA-10 ETCH PRIMER With excellent anti-corrosive protection, PA-10 Vinyl etch primer is perfect for priming steel, aluminium or nonferrous surfaces above the waterline. A quick drying time allows over coating in 3 hours. • Coverage: up to 13sq.m/litre. (Recommended Coats: 1-3) • Coverage: up to 1.5sq.m/litre. (Recommended Coats: 2) • Overcoat with: Single-Pack Products

One-Up Primer/Undercoat A single pack primer/undercoat specially formulated for marine conditions. For use on all substrates under one-pack topcoats such as Toplac Plus and Interdeck.

• Coverage: up to 9sq.m/litre. (Recommended Coats: 3) • Thinning: Enamel Thinner #1 • Clean up: Enamel Thinner #1 Do not apply two-pack systems over this product. Do not use on areas that are permanently immersed.

• Thinning: PA-10 Thinner #5 • Clean up: PA-10 Thinner #5

Our price $47.95 $79.95 $239.95

Cat.No.

Colour

Size

61044 59956 59958

Red Red Red

500ml

Our price $36.95 $36.95 $64.95 $64.95 $179.95

Cat.No. 59400

Colour White

Size 500ml

1L 4L

59401 59402 59403 59404

Blue/Grey 500ml

White

1L 1L 4L

PA-10 THINNER #5 A specially formulated blend of solvents to work specifically with PA-10 without affecting flexibility or durability. Thin up to 50% for brush application. Up to equal quantities PA-10 when spraying.

Blue/Grey

White

PRIMOCON A one-pack aluminium pigmented anticorrosive primer. Ideal as a primer under all antifoulings and can be used as a sealer coat for unknown or incompatible antifoulings. Suitable for all substrates including Fibreglass, wood, steel and aluminium.

• Use for thinning: PA-10 Vinyl Etch Primer • Use to clean: PA-10 Vinyl Etch Primer

Our price

Cat.No.

Colour

Size

$28.95 $47.95

60162 60160

Clear Clear

500ml

• Coverage: up to 7.4sq.m/litre. (Recommended Coats: 1-5) • Over Coat With: Antifoulings

1L

Micron AP Incorporating Biolux technology and boosted biocide levels, Micron AP is an easy to apply and fast drying antifoul specifically formulated for advanced performance in high fouling areas such as tropical waters. ANTIFOULING - ABLATIVE • Coverage: up to 4sq.m/litre. (Recommended Coats: 2-3)

• Thinning: Antifouling Thinner #3 • Clean up: Antifouling Thinner #3

Our price $229.95 $67.95

Cat.No. 56432

Colour

Size

Silver Grey Silver Grey

4L 1L

56424

INTERPROTECT EPOXY PRIMER Rapid dry epoxy primer/sanding undercoat. A two-pot mix for use above and below the waterline on steel, timber and aluminium. Applied directly to fibreglass - helps in Osmosis protection.

• Priming: Interprotect or Primocon • Thinning: Antifouling Thinner #3 • Clean up: Antifouling Thinner #3 Do not use on Aluminium or Zinc

• Coverage: up to 9sq.m/litre. (Recommended Coats: 1-5) • Over Coat With: Antifoulings • Thinning: Epoxy Thinner #7 • Clean up: Epoxy Thinner #7

Size Our price

Cat.No.

Colour

$419.00 $419.00 $999.00

55790 55791 55795

Blue

4L 4L

Our price $67.95 $116.95 $269.95 $889.00

Cat.No. 57537

Colour White White White White

Size 500ml

Black Black

10L

57539 57547 57549

1L 4L

Micron Extra 2 Optimum performance antifouling. High copper content, self polishing technology ablates slowly over time. Re-coats most existing anti-fouling with normal surface preparation.

16L

EVERDURE PRIMER Everdure timber primer and sealer is a two-pack clear epoxy resin. Designed to harden and densify timber and permanently seal out moisture. This epoxy is

• Coverage: up to 10sq.m/litre. (Recommended Coats: 3) • Priming: Interprotect or Primocon • Thinning: Antifouling Thinner #3 • Clean up: Antifouling Thinner #3 Do not use on Aluminium or Zinc Surfaces

engineered to allow maximum penetration and migration into timber while leaving an ideal base prior to applying varnish. Simple 1.1 mixing ratio.

• Coverage: up to 8 - 16sq.m/litre. • Thinning: Epoxy Thinner #7 • Clean up: Epoxy Thinner #7

Size Our price

Cat.No.

Colour

$319.00 $319.00 $319.00 $319.00 $749.00

55840 55842 55844 55841 55846

White

4L 4L 4L 4L

Our price

Cat.No.

Colour

Size 500ml Kit 1L Kit

Blue

Base & Activator Clear Base & Activator Clear Base & Activator Clear Activator Clear Base & Activator Clear Base Clear

$55.95 $74.95

60592

Black

60594

Red

$139.95 $209.95 $209.95 $1049.00

Black

10L

60596 60582 60590 60580

2L Kit

4L 4L

How much topside paint do I need? Determining how much paint you will need is fairly simple. For Topsides only , refer to the chart below.

40L Kit

ETCH PRIMER Delivering the latest technology in a two-pack primer, Etch Primer is free of hazardous materials such as Chromate making a safer working product. Designed to be applied in thin films to provide superior adhesion. • Coverage: up to 9sq.m/litre. (Recommended Coats: 1-2) • Over-Coat with: Single or Two-pack systems. For use on Aluminium only

Motor

Sail

Overall Length (Meter) Overall length (Feet)

6.1 7.6 9.1 10.7 12.2 6.1 7.6 9.1 10.7 12.2 20 25 30 35 40 20 25 30 35 40 1.5 2.5 3.5 4.0 4.5 2.0 2.4 3.5 3.7 4.0 1.0 1.25 1.25 1.5 1.5 0.75 1.0 1.25 1.25 1.5

Beam (Meter) Freeboard Height (Meter) Litres Required*

Our price

Cat.No.

Colour

Size

$63.95 $79.95

60010 60012

Yellow Base 500ml Kit

2.6 4.4 5.5 7.7 8.7 2.1 3.5 5.5 6.3 8.5 *Average amount based on 2 coats - This table is to be used as a guide only. Read the product data sheet before you start.

Yellow Base

1L Kit

177

ORDER ONLINE: www.whitworths.com.au

Made with FlippingBook Online newsletter