Whitworths Marine & Leisure 2024 Winter Bargain Book

BILGE PUMPS & ACCESSORIES

Rule LoPro Bilge Pumps The Rule LoPro (low profile) bilge pumps are small enough to fit into tight spaces in the bilge - yet pack real pumping power at 900GPH/3400LPH. Fully submersible. Horizontal or vertical mounting. Rotation discharge swivels 180 degrees for ease of installation. Shurflo 500GPH Bilge Pump Submersible pump for continuous duty with 3' tinned wire, anti-airlock, tough nylon housing, and ignition protection. Footprint: 86mm (2 3/8"). Port Size Outlet: 19mm (3/4"). Voltage: 12VDC. Dimensions: 114 x 95mm Cat.No.67050 RRP $56.80 Our price $50.95

TMC Electric Bilge Pumps These TMC 12 volt electric bilge pumps are fully sealed for submersible use. The motor section and impellor cartridge can unclip from the base for easy cleaning. Mounting screws and washers included.

450 GPH 900 GPH 1250 GPH

Price

Cat.No. Capacity / Amps Outlet Size O.D.

Dimensions (mm)

85(H) x 85(Dia.)  $39.95  107(H) x 97(Dia.)  $54.95  114(H) x 122(Dia.)  $79.95 

67094 67096 67098

450 GPH / 1.5A 900 GPH / 3.5A 1250 GPH / 5A

20mm(3/4”) 29.5mm(1 1/8”) 29.5mm(1 1/8”)

TMC Auto Low Profile Bilge Pump 500GPH Designed specifically for tight spaces with rotating outlet ports and capable of draining down to 10mm with a built in non-return valve to prevent back flow. 19mm (3/4") outlet, 12VDC, 500GPH (1890LPH) TMC Auto-Eye Automatic Bilge Pump Equipped with built in electronic controlled reed sensor system to make fully automatic operation easy. No separate float switch is needed and relay loop design protect the pump against instant high current. No power use until pump turns on when water rises. Rec Retail $147.80 Our price $129.95

Rec Ret Our price $219.00  $209.95  $164.00 $154.95

Cat.No. Description

66980 LoPro Bilge Pump 12V 900GPH 66985 LoPro Auto Bilge Pump 12V 900GPH

Cat.No.67085

Rule Next Generation Electric Bilge Pumps The Rule fully submersibe NEXT Generation pumps have specially designed motors for maximum capacity and reliable long life, fully sealed and protected from damage when run dry, with automatic air-lock release and built in thermal cut-out switch. An included check valve reduces the risks of backflow and threaded discharge port allows greater flexibility with interchangeable hose tails. Designed in the U.S.A, 3 year warranty.

Price

Cat.No. Capacity / Amps

Outlet Size O.D. 20mm(3/4 " ) 29mm(1-1/8 " ) 29mm(1-1/8 " )

Dimensions in 136 x 82 x 110

 $99.95 

67088

500GPH / 1.6A

Please note: Not for use in rainwater tanks or basements. Capacity is US GPH

165 x 96 x 130  $139.95  190 x 108 x 150  $189.90 

67090 1000GPH / 4.5A

67092

1500GPH / 9A

Johnson Bilge Pumps These 12 Volt, easily installed submersible cartridge bilge pumps are great value. They have removable motor and impellor cartridge for easy cleaning. 2 year warranty.

Rec Ret Our price

Cat.No. Capacity Size

Hose I.D.

67013 360 gph 99 x 74mm 3/4" (20mm) $62.00 $59.95 67019 500 gph 99 x 74mm 3/4" (20mm) $77.00  $71.95  67021 800 gph 112 x 74mm 3/4" (20mm) $90.00  $84.95  67023 1100 gph 112 x 74mm 1" (25mm) & 11/8" (27mm) $115.00  $104.95  Rule 360/1100GPH Side Mount Pump Bracket Cat.No.67010 Rec Retail $45.50 Our price $41.95

400

600

Rec Ret Our price $73.70  $49.95 

Cat.No . Capacity GPH Outlet Size

67109 67106 67110 67112 67102 67114

400GPH 3/4" 600GPH 3/4" 800GPH 3/4"

WHILE STOCKS LAST! WHILE STOCKS LAST! WHILE STOCKS LAST!

Rule-mate Compact Automatic Bilge Pumps Ultra compact with high performance and

$54.95 $66.95 $104.95

$65.60 $86.80 $116.10

SAVE $40!

1000GPH

3/4"

reliability, the Rule-mate is equipped with Auto water level sensing technology with a higher flowrate and less amperage than previous models. Cat.No. Capacity Rec Retail Our price

$232.25 $209.95 $313.05 $279.95

1600GPH 1-1/8" 1980GPH 1-1/8" or 1-1/2"

Rule Pump Strainer This stainless steel pump strainer extends the life of all round Rule bilge pumps. The stainless steel gauze fits against the impellor housing for maximum benefit. Rule Bilge Pump Base Replacement base to suit new model Rule bilge pumps, 360, 500, 800 & 1100GPH. Cat.No. Suit Rule Pump Rec Ret Our price 66808 360 / 500 GPH $37.00  $32.95  66810 800 / 1100 GPH $40.50  $37.95 

was $164.95 67045

$177.00  $124.95 

500GPH 800GPH 1100GPH

$219.95 $259.95

$230.00 $280.00

67047 67049

Our price $104.95

Designed in the U.S.A, these pumps have specially designed motors for maximum capacity and reliable long life, fully sealed and protected from damage when run dry, with automatic air- lock release. All fully submersible. 3 year warranty. Cat.No. Capacity Size Rule Electric Bilge Pumps Deluxe 3 Way Switch Cat.No.84701 1000 gph 102 x 73mm 67017

360/500GPH

Our price $14.95

Rec Retail $17.75

Cat.No.66804

Bilge Pump Wire - 10m Sheathed 3 Core Marine Wire - 4mm tinned wire. Cat.No. Description Rating Length

Hose I.D. Rec Ret Our price Please note: Not for use in rainwater tanks or basements. Capacity is US GPH

Price $48.95

33154 Twinsheath tinned 3 core

16A -20°C to 90°C 10m

$139.95

$151.00 $292.00

1 1/8"

Bilge Pump 3 way Switch Panel Switch for manual or automatic (use with float switch) control of any 12 volt pump. Features three way switch, red and green indicator lights, fuse and full wiring. Bilge Pump Control Panel IP65 Rating Contoured black plastic panel with 3 way rocker switch - automatic / off / manual with spring return to off from manual position. Red LED indicator light and fuse holder with fuse. Fully wired for use. 12 volt only. Panel size: 82mm x 63mm. Rec Retail $33.50 Our price $29.95 Bilge Pump 3 way Switch Panel High quality stainless steel panel with 3 position toggle switch (Manual, off & auto). With Rules fail safe spring return off positon. Size: 81x 50mm Rec Retail $40.50 Our price $35.95

67025 1500 gph 152 x 108mm 1 1/8" $279.95 67033 2000 gph 152 x 108mm 1 1/8" $364.00 $349.95 67041 3700 gph 185 x 125mm 1 1/2" $617.00 $599.95

Spiral Bilge Pump Hose - 28mm (1 1/8”)

Cat.No.84699

Our price $13.95

Cat.No.142730

Bilge Pump Installation Kits Everything you need to instal your submersible bilge pump. Suitable for either 20mm (3/4") or 28mm (1 1/8") oulet bilge pumps.

Rec Ret Our price

Cat.No. Description

Bilge Pump Installation Kit - 3/4 " Includes 1.5m of 20mm cuffed hose. 1 x 3/4 " nylon skin fitting and 2 x 7/8 " stainless steel hose clamps. Bilge Pump Installation Kit - 1 1/8 " Includes 1.8m of 28mm cuffed hose. 1 x 1-1/8 " nylon skin fitting and 2 x 1-1/4 " x stainless steel hose clamps

Cat.No.84692

$19.99

$23.50

67015

$36.95

$39.50

67020

Our price $104.95

Rec Retail $112.00

Cat.No.84701

64

WHITWORTHS MARINE & LEISURE ORDER ONLINE: www.whitworths.com.au

Made with FlippingBook Online newsletter