Bunzl Safety Catalogue - SEC 5 - Load Restraints

TRUCK WINCHES

TRUCK WINCH GUIDELINES

WARNING

!

• Keep winch tight - not loose • Make sure cog teeth are in good working order • Ensure appropriate winch is used • If you are using a clip-on winch ensure the arms are straight not bent • When in use, ensure that at least two loops of webbing remain on winch drum.

• Winches shall not be loaded in excess of lashing capacity. • A minimum of two layers of polyester webbing must be wound around the winch drum when tensioning. CARGO WINCHES ARE NOT APPROVED FOR OVERHEAD LIFTING

CLIP-ON TRUCK WINCHES FEATURES AND BENEFITS • Lashing capacity 2500kg • Fitted with either 50mm x 9m • Easy to fit to load rail

STANDARDS AS/NZS4380

CODE

DESCRIPTION

HOOK TYPE WIDTH (mm) LENGTH (m)

LC (Kg) WEIGHT (Kg)

UOM

342109-9

Clip-on winch with 9m strap

Hook & Keeper

50

9

2500

7.45

EACH

SLIDE-ON TRUCK WINCHES FEATURES AND BENEFITS • Lashing capacity 2500kg

• Fitted with either 50mm x 9m • Designed to slide on truck rail

STANDARDS AS/NZS4380

CODE

DESCRIPTION

HOOK TYPE WIDTH (mm) LENGTH (m)

LC (Kg) WEIGHT (Kg)

UOM

342009-9

Slide-on winch with 9m strap

Hook & Keeper

50

9

2500

10.25

EACH

TRUCKERS WINCH BAR FEATURES AND BENEFITS

• Winch bar comes complete with safety trigger and ridged non-slip handle for easy grip (all steel construction and chrome plated) for use with all winches • Materials: Steel construction and chrome plated

CODE

DESCRIPTION

WEIGHT (Kg)

UOM Each

343400S

Winch bar, chrome plated with safety retaining device

2.5

SAFETY AND OPERATING INSTRUCTIONS • Never release the winch bar Safety Retaining Device without checking that the ratchet pawl is fully engaged between the ratchet gear teeth. • Releasing a winch bar without the ratchet pawl being fully engaged can cause serious injury to the user or bystanders. • "Cheaters Bars" (extenders) should not be used with winch bars. • To prevent the winch bar from slipping out and overloading the tip and / or end cap, the tip of the winch bar shall be inserted through both opposing slotted holes on the winch drum end cap of the Beaver Mark III Truck Winches WARNING !

bunzlsafety.com.au | 9 5

Made with FlippingBook - Online magazine maker