® A Gorman-Rupp Company Engine Driven Solids Handling Pumps
Seals Buna-N Buna-N 180° F Viton ® 200° F • Maximum Working Pressure 75 PSI • Wear Re istant C st Iron Construction and Solids Handling Impeller • Built-in Check Valve 1.5 80 Maximum Solids Handling Capacity: 3/8" Diameter 0.47/1.7 Run Time (Hours) Tank Size (Gal/Ltr.) Ship Wt. (Lbs.) 0.47/1.7 110 • Heavy Duty Ste l Roll Frame Included • Pipe Nipple/Discharge Elbow/Strainer 1.5 2.7 Run Time (Hours) Run Time (Hours) 0.79/3.0 125 Buna-N 1.3 Viton ® 2 5 – 316 Series Includes: (1) Pipe Nipples, (1) Discharge Elbow & (1) Strainer 0.95/3.6 140 1.40/5.2 7 1.40/5.2 170 2.4 8 0.87/3.2 200 1 32 5 0 15 – 327/339 Ser es Includes: (1) Pipe Nipple, (1) MNPT D scharge Elbow & (1) Strainer • QSP – Quick Ship Pumps for Many Models Viton ® 2.5 Seals Tank Size (Gal/Ltr.) Tank Size (Gal/Ltr.) Ship Wt. (Lbs.) Ship Wt. (Lbs.) Standard Features • Viton ® or Buna-N Mechanical Seals Options • Self-primes to 20 Ft. • Semi-open, Clog Resistant Cast Iron Impeller • Stainless Steel Shaft Sleeve • Maximum Temperature:
2" Solids Handling Pumps
Run Time (Hours)
Tank Size (Gal/Ltr.)
Ship Wt. (Lbs.)
Model
Curve Port
Driver
Seals Buna-N
3168-95
A 2" NPT Honda GC160
1.5 80 Maximum Solids Handling Capacity: 3/8" Diameter 0.47/1.7
Construction: Cast Iron
Run Time (Hours) 2 5 5 Run Time (Hours) 2.4 8 Model 3168-95 2.7 Run Time (Hours) Run Time (Hours) 1.5
Tank Size (Gal/Ltr.) Tank Size (Gal/Ltr.)
Ship Wt. (Lbs.) 7 Ship Wt. (Lbs.) Ship Wt. (Lbs.) Ship Wt. (Lbs.)
Model
Curve Port
Driver
Seals
3270-D5 Model
0.79/3.0 125
C 3" NPT Hatz Diesel 1B20 Viton ® Curve Port riv r Seals
327A-V5
C 3" NPT B
Honda GC160 Viton ®
0.47/1.7 110 0.87/3.2 200 15 Tank Size (Gal/Ltr.)
Tank Size (Gal/Ltr.) 1.40 5.2 1 32 5 0 Curve Port
Driver
D 3" NPT Yanmar Diesel L70 ++ ▲ Viton ® C Hatz Dies l 1B30 + ▲ Curve Port
Model 3390-95 3391-D5 Z Model 1 V 168 9
Driver Dr ver
Seals Buna-N Viton ® Viton ® Seals n -
A 2" NPT Honda GC160
Curve Port E 3" NPT B & S Vanguard ▲ Honda GX270 ++ A 2 P Honda GC160 A 2" NPT Honda GC160 E 3" Honda GX270 ++ ▲ C
1.5 80 Maximum Solids Handling Capacity: 3/8" Diameter 0.47/1.7 1.40/5.2 17 80 Maximum Solids Handling Capacity: 3/8" Diameter Buna-N 1.3 0.95/3.6 140 47/1 7 2. axi u Solids Handling Capacity: 3/4" Diameter Construction: Cast Iron
3168-95 391-V Construction: Cast Iron Construction: Cast Iron Construction: Cast Iron
( ♦ ) HP Class represents market category and is not intended to define actual horsepower (*) Standard NPT pipe thread
(**) This dimension may vary due to engine manufacturer’s specifications. NOTE: Dimensions are in inches (centimeters) and have a tolerance of ± 1/8". ++ 12V DC Electric Start (Battery Not Included) ▲ Oil Alert Included
Model
Curve Port
Driver
2.7 Run Time (Hours) Run Time (Hours) Run Time (Hours) 2.7 i ( r )
Tank Size (Gal/Ltr.) Tank Size (Gal/Ltr.) Tank Size (Gal/Ltr.) k Size ( l/ tr.)
Ship Wt. (Lbs.) Ship Wt. (Lbs.) Ship Wt. (Lbs.) Ship Wt. (Lbs.)
3270-D5 Model
C 3" NPT Hatz Diesel 1B20 Viton ® Curve Port riv r Seals
327A-V5 327A-V5 3270-D5 Model 3270-D5 l Model Model 3390-95 1 V 3391-D5 Z 0 9 V 3391-D -Z
C 3" NPT B Model C 3" PT B Curve Port Curve Port D " "
Driver Driver
Seals Seals
3" Solids Handling Pumps
327A-V5
0.47/1.7 110 0.47/1.7 110 0.79/3.0 125 0.79/3.0 125 C 3" NPT B W**
Honda GC160 Viton ®
C 3" NPT Hatz Diesel 1B20 Viton ® Curve Port riv r Seals C 3" NPT Hatz ies l 1B20 Viton ® r rt ri r l
D 3" NPT Yanmar Diesel L70 ++ ▲ Viton ® C Hatz Dies l 1B30 + ▲
3391-D5 Z
1.5 1.5 2.4 8 2.4 8 5
Honda GC160 Viton ® Honda GC160 Viton ® ®
H E 3" NPT B & S Vanguard ▲ C Honda GX270 ++ E 3" NPT Honda GX270 ++ ▲ 0.87/3.2 200 1 32 5 0 5
3390-95 1 V
HP Class ♦
L**
SUC* 2" FNPT 3" FNPT 3" FNPT
DIS* 2" FNPT it
Yanmar Diesel L7 ++ ▲ Hatz Dies l 1B30 + ▲
3391-V5
D 3" NPT Yanmar Diesel L70 ++ ▲ Viton ® C Hatz Diesel 1B30 ++ ▲ 316 Series 5 HP B & S Vanguard ▲ Honda GX270 ++ ▲ i E
0.87/3.2 200 1 32 5 0 15 20.0 [50.8] 17.5 [44.4] 17.6 [44.7] Construction: Cast Iron 1.40/5.2 0 95 3 6 140 7
Buna-N 1.3 Viton ® 2.5 Buna-N 1 3
Maximum Solids Handling Capacity: 3/4" Diameter
E 3" NPT B & S Vanguard ▲ C " Honda GX270 ++ 327 Series 5 HP ++ ▲ E 3" NPT Honda GX270 ++ ▲ 339 Series 8 HP "
0.95/3.6 140 1.40/5.2 7 24.0 [60.9] 19.2 [48.7] 18.6 [47.2] ( ♦ ) HP Class represents market category and is not intended to define actual horsepower (*) Standard NPT pipe thread 2.5 (**) This dimension may vary due to engine manufacturer’s specifications. NOTE: Dimensions are in inches (centimeters) and have a tolerance of ± 1/8". ++ 12V DC Electric Start (Battery Not Included) ▲ Oil Alert Included 1.40/5.2 170 31.0 [78.7] 22.5 [57.1] 23.6 [59.9] . . / .
Viton ® 3" MNPT 3" MNPT it n ®
-
3391-V5 Construction: Cast Iron
Maximum Solids Handling Capacity: 3/4" Diameter Maximum S lids Handling Capacity: 3/4" Diameter
Construction: Cast Iron ( ♦ ) HP Class represents market category and is not intended to define actual horsepower (*) Standard NPT pipe thread ( ♦ ) HP Class represents market category and is not intended to define actual horsepower (*) Standard NPT pipe thread (**) This dimension may vary due to engine manufacturer’s specifications. NOTE: Dimensions are in inches (centimeters) and have a tolerance of ± 1/8". ++ 12V DC Electric Start (Battery Not Included) ▲ Oil Alert Included (**) This dimension may vary due to engine manufacturer’s specifications. NOTE: Dimensions are in inches (centimeters) and have a tolerance of ± 1/8". ++ 12V DC Electric Start (Battery Not Included) ▲ Oil Alert Included
( ♦ ) HP Class represents market category and is not intended to define actual horsepower (*) Standard NPT (Female) pipe thread. (**) This dimension may vary due to engine manufacturer’s specifications. NOTE: Dimensions are in inches (centimeters) and have a tolerance of ± 1/8".
HP Class ♦
Model
L**
W**
H
SUC* 2" FNPT 3" FNPT 3" FNPT
DIS* 2" FNPT 3" MNPT 3" MNPT
316 Series
5 HP
20.0 [50.8] 17.5 [44.4] 17.6 [44.7]
HP Class ♦ SUC* DIS*
Model
L**
W**
H
327 Series
5 HP
24.0 [60.9] 19.2 [48.7] 18.6 [47.2]
316 Series Model
HP Class ♦ HP Class ♦ 4/5 HP
2
2 20.0 [50.8]
17.5 [44.4]
17.6 [44.7] 8 HP
339 Series W**
31.0 [78.7] 22.5 [57.1] 23.6 [59.9]
SUC* 2" FNPT 3" FNPT 3" FNPT SUC* 2" FNPT 3" FNPT " F
L** L**
H H
DIS* 2" FNPT 3" MNPT 3" MNPT DIS* 2" FNPT 3" MNPT "
Model ( ♦ ) HP Class represents market category and is not intended to define actual horsepower (*) Standard NPT (Female) Pipe Thread (Discharge Elbow Not Shown). (**) This dimension may vary due to engine manufacturer’s specifications. NOTE: Dimensions are in inches (centimeters) and have a tolerance of ± 1/8". 316 Series 316 Series 5 HP 5 HP 24. [6 .9]
W** ( ♦ ) HP Class represents market category and is not intended to define actual horsepower (*) Standard NPT (Female) pipe thread. (**) This dimension may vary due to engine manufacturer’s specifications. NOTE: Dimensions are in inches (centimeters) and have a tolerance of ± 1/8". 9.2 [ 8.7] 8. [ 7.2]
20.0 [50.8] 17.5 [44.4] 17.6 [44.7] 20.0 [50.8] 17.5 [44.4] 17.6 [44.7] 24.0 [60.9] 19.2 [48.7] 18.6 [47.2] 31. [78.7] 22.5 [57.1] 23. [59.9] 31.0 [78.7] 22.5 [57.1] 23.6 [59.9]
327 Series 327 Series 39 ri s 339 Series
5 HP 5 HP 8 8 HP
Optional Wheel Kit For Roll Frame Pumps
Ship Wt. (Lbs.)
( ♦ ) HP Class represents market category and is not intended to define actual horsepower (*) Standard NPT (Female) pipe thread. (**) This dimension may vary due to engine manufacturer’s specifications. NOTE: Dimensions are in inches (centimeters) and have a tolerance of ± 1/8". (**) This dimension may vary due to engine manufacturer’s specifications. NOTE: Dimensions are in inches (centimeters) and have a tolerance of ± 1/8". Model ( ♦ ) HP Class represents market category and is not intended to define actual horsepower (*) Standard NPT (Female) pipe thread.
HP Class ♦ SUC* DIS*
L**
W**
H
Model
Features
316 S ies
4/5 HP
2
2 20.0 [50.8]
17.5 [44.4]
17.6 [44.7]
Includes 10" semi-pneumatic tires on steel wheels with steel clamps and handles for universal mounting to frame.
C402-90 ( ♦ ) HP Class represents market category and is not intended to define actual horsepower (*) Standard NPT (Female) Pipe Thread (Discharge Elbow Not Shown). (**) This dimension may vary due to engine manufacturer’ specifi ations. NOTE: Dimensions are in inches (centimeters) and have a tolerance of ± 1/8".
25
HP Class ♦ SUC* DIS* HP Class ♦ SUC* DIS*
Model Model 316 Series 316 Series
L** L**
W** W**
H H
4/5 HP 4/5 HP
2 2
2 20.0 [50.8] 2 20.0 [50.8]
17.5 [44.4] 17.5 [44.4]
17.6 [44.7] 17.6 [44.7]
® ( ♦ ) HP Class represents market category and is not intended to define actual horsepower (*) Standard NPT (Female) Pipe Thread (Discharge Elbow Not Shown). (**) This dimension may vary due to engine manufacturer’s specifications. NOTE: Dimensions are in inches (centimeters) and have a tolerance of ± 1/8". ( ♦ ) HP Class represents market category and is not intended to define actual horsepower (*) Standard NPT (Female) Pipe Thread (Discharge Elbow Not Shown). (**) This dimension may vary due to engine manufacturer’s specifications. NOTE: Dimensions are in inches (centimeters) and have a tolerance of ± 1/8".
Manufacturer of AMT & IPT Pumps 400 Spring Street • Royersford, PA 19468 USA
www.amtpump.com • 888-amt-pump (268-7867) The Gorman-Rupp Company reserves the right to discontinue any model or change specifications at any time without incurring any obligation. ©2012 American Machine and Tool Company. All rights reserved.
A Gorman-Rupp Company
0414 1020
ENG-10
Made with FlippingBook Learn more on our blog