process & control
Oxygen Transmitters/Hygrometers
The oxy.IQ uses proven galvanic fuel cell sensor technology to accurately measure O2 in a variety of gases, even in hazardous environments. • Two-Wire, Loop-Powered 4 to 20 mA Transmitter • Display with Keypad • Proven Galvanic Fuel Cell O 2 Sensor Technology • User Selectable Ranges for PPM & Percent Oxygen • User-Friendly and Intuitive User Interface with Diagnostics • Microprocessor-Based, All-Digital Technology for Reliable Operation • Low Maintenance, Economical & Compact • Sensor Failure Alarm • Sensor Lifetime Indication • NAMUR Error Indication Panametrics oxy.IQ Oxygen Transmitters
Ordering Information
Mfg #
Description
Order #
Price
$ 2,720 $ 3,240 $ 3,140 $ 3,025
OXYIQ-0-1-0-0-0 No Sensor
OXYIQ-0-1-0-0-0 OXYIQ-1-1-1-0-0 OXYIQ-2-1-1-0-0 OXYIQ-3-1-1-0-0 OXYIQ-4-1-1-0-0 OXYIQ-5-1-1-0-0
OXYIQ-1-1-1-0-0 Standard PPM Sensor, 0 to 10 PPM; 2m Cable
OXYIQ-2-1-1-0-0 Acid PPM Sensor, 0 to 10, 100, 1,000 & 10,000 PPM; 2m Cable
OXYIQ-3-1-1-0-0 Standard Percent Sensor; 2m Cable OXYIQ-4-1-1-0-0 Acid Percent Sensor; 2m Cable
$
3,115
Replaces O2X1
$ 3,065
OXYIQ-5-1-1-0-0 Standard PPM Sensor, 0 to 100, 1,000 & 10,000 PPM; 2m Cable
oxy.IQ
★ Recommended Transcat Calibration
$
315
XX0021-3
Recommended Accessories
D
$ $ $ $ $ $ $
520 400 300 385 345
OX-1 OX-2 OX-3 OX-4 OX-5
Standard PPM Sensor, 0 to 10 PPM
OX-1 OX-2 OX-3 OX-4 OX-5
Acid PPM Sensor, 0 to 10, 100 & 1,000 PPM
Standard Percent Sensor
oxy.IQ Sensor
Acid Percent Sensor
Standard PPM Sensor, 0 to 100 & 1,000 PPM
98
704-1317-02 Cable for oxyIQ, 2m, Black for Standard Option 704-1317-10 Cable for oxyIQ, 10m, Black for Standard Option
704-1317-02 704-1317-10
225
Panametrics dew.IQ Hygrometers
The dew.IQ combines technologically advanced M Series moisture probe with state-of-the-art software and electronics for unequaled overall performance. • Rack, Bench, Panel, and Wall Mount Configurations • NEMA 4 Weatherproof Membrane Front Display/Keypad • M Series or IQ.Probe Moisture Probe Compatible • Displays Moisture Content in Dew/Frost Point and ppmv • Built-In Isolated Current or Voltage Analog Output • Fail-Safe Fault Alarm Relay • Two Measurement Alarm Relays • No More EPROM Replacement after Probe Recalibration • When Used with the New IQ.Probe, No Calibration Data Needs to be Entered – Connect it and Go • Record and Display the Moisture Reading in Dew Point or ( ° F or ° C) or ppmv with a Programmed Constant
Specifications
Input
Moisture Signal from an M Series Probe or IQ probe Switch-Selectable; 4-20 mA, 400 Ohm Maximum Series Resistance, 0 to 20 mA, 400 Ohm Maximum Series Resistance, 0 to 2 V, 10 K Ohm Minimum Load Resistance One Fail-Safe Fault Relay; Two Standard Form C Relays SPDT, Rated for 3 A at 250 VAC / 30 VDC
Analog Outputs
Alarm Relays Power Requirements Temperature Configurations
Universal Power 100-240 VAC @ 50-60 Hz, or 24 VDC
Ordering Information
Operating: -20° to 60°C (-4° to 140°F)
Mfg #
Description
Order #
Price
Panel, 9 5in Half-Rack, Bench Top or Wall Mount (Type 4 / IP66) 32GB Capacity with MicroSD Card, 2 GB Card Included Dew Point Temperature in °F or °C, PPMv with Constant Pressure Input
Rack Mount, Single Channel Moisture Analyzer, 100 / 120 VAC US NEMA Straight Plug Bench Top, Single Channel Moisture Analyzer, 100 / 120 VAC US NEMA Straight Plug Panel Mount, Single Channel Moisture Analyzer, 100 / 120 VAC US NEMA Straight Plug
DEWIQ-131-0 $ 3,000
DEWIQ-131-0
Datalogger
DEWIQ-231-0 $ 3,000
DEWIQ-231-0
Display Functions
DEWIQ-331-0 $ 3,000
DEWIQ-331-0
Sensor Type
Thin-Film Aluminum Oxide
Moisture Probe Compatibility Dew/Frost Point Temp. Calibrated Accuracy at 77°F (25°C)
Compatible with all Panametrics M Series Aluminum Oxide Probes and IQ Probe
Wall Mount (NEMA 4X / IP66), Single Channel Moisture Analyzer, 100 to 240 VAC, No Power Cord Supplied
DEWIQ-461-0 $ 3,600
DEWIQ-461-0
Standard: -80° to 20°C (-112° to 68°F) with Data to -110°C (-166°F)
★ Recommended Transcat Calibration
XX0021-3 $
315
Recommended Accessories
±2°C (3 6°F) from -65° to 10°C (-85° to 50°F) ±3°C (5 4°F) from -80° to -66°C (-112° to -87°F) ±0 5°C (0 9°F) from -65° to 10°C (-85° to 50°F) ±1 0°C (1 8°F) from -80° to -66°C (-112° to -87°F) Meets Specified Accuracy within Three Minutes
IQprobe- 2R0-100-0
IQ Series Moisture Probe with Thin Film Aluminum Oxide Sensor, NIST Certification
IQPROBE- 2R0-100-0 230-049-01
$ 1,910
$ $
127 325
Repeatability
230-049-01 2m Cable with M8 Connector (Connects Probe to Analyzer)
230-058
10m Cable with M8 Connector (Connects Probe to Analyzer)
230-058
Warm-Up Time
D4
phone : 800-828-1470 fax : 800-395-0543 TRANSCAT.com • TRANSCAT.ca
Made with FlippingBook Ebook Creator