electrical test Multimeters Volatge/Socket Testers FLIR VP50-2 Non-Contact Voltage Detector and Flashlight The FLIR VP50-2 is a durable, CAT IV-rated non-contact voltage detector featuring light, vibration, and beeper feedback alarms and a powerful LED flashlight.
• AC Voltage Range of 90 to 1000 V AC and High-Sensitivity Mode of 24 to 1000 V AC • Durable Design to Withstand a 3 m (9.8 ft) Drop • Ideal for Professionals Performing Field Troubleshooting and Verification of Electrical Installations Within Residential, Commercial, and Industrial Buildings • Non-Contact Voltage (NCV) Technology • Double Molded Slip-Resistant Grip and Anti-Roll Case • Low-Profile Probe Tip
NEW
Each Unit Includes: Non-Contact Voltage Detector + Flashlight, 2 x AAA Energizer Batteries, Quick Start Guide.
Ordering Information
Mfg #
Description
Order # VP50-2
Price $ 37
FLIR VP50-2
Non-Contact Voltage Detector and Flashlight
The Fluke ST120+ GFCI Socket Tester with beeper and the ST120 GFCI Socket Tester checks that each wire in the outlet is properly connected to the building’s electrical system. Fluke ST120 & ST120+ Socket Tester with GFCI Test
E
• Fast Visual Identification of all 6 Wiring Conditions - Correct Installation
• One-Button GFCI Tests • Rated Operating Voltage: 110V AC to 125V AC • Rating: 300 V CAT III
NEW
- Open: Ground, Neutral, Hot - Hot/Neutral Reversed - Hot/Ground Reversed • Audible Alert Helps You Work Faster, Safer (ST120+)
ST120+
Ordering Information
Mfg # ST120
Description
Order #
Price
$ $
15 20
Socket Tester with GFCI Test
ST120
ST120+ Socket Tester with GFCI Test & Beeper
ST120+
Fluke Networks FiberLert™ Live Fiber Detector Quickly verify fiber activity, polarity, and connectivity with the FiberLert™ Live Fiber Detector. This pocket-sized tool tests single-mode, multimode, UPC and APC patch cords and ports with a non-contact / non-contaminating detector.
• Senses Near Infrared Light Emitted From Fiber Optic Cabling. A Continuous Red Glow at the Handle and an Audible Beeping Noise (if Not Switched Off) Indicates the Presence of Near Infrared Light • Detects Optical Power in Single- Mode and Multimode Fiber Wavelengths (Near Infrared Range 850 nm to 1625 nm) • No Setup or Interpretation Needed – Light and Sound Indicate Presence of an Optical Signal
• “Non Contact” Detector Reduces the Risk of
Contamination and Damage • Suitable for Ports and Patch Cords, SM, MM, UPC and APC Connections • LightBeat™ Flashes to Indicate Operation and Battery Status; Powers Off After Five Minutes of Inactivity To Preserve Battery Life (2xAAA, Included) • Two-Year Warranty
Ordering Information
Mfg #
Description
Order #
Price
$
130 Call
FIBERLERT-125
Live Fiber Detector, Single Pack
FIBERLERT-125
★ Recommended Transcat Calibration
E24
phone : 800-828-1470 fax : 800-395-0543 TRANSCAT.com • TRANSCAT.ca
Made with FlippingBook Ebook Creator