Multimeters EV Adapter/Power Quality Measurement
electrical test
Fluke FEV100 Adapter Kit for Electric Vehicle Charging Stations Test the safety and performance of type 1, level 1 or level 2 electric vehicle ac charging stations (EVSEs) with the Fluke FEV100. This test adapter simulates the presence of an electrical vehicle, allowing you to conduct tests in combination with appropriate test instruments such as a digital multimeter or oscilloscope.
• Check that an Electric Vehicle Charging Station is Correctly Wired and that Protective Earth is Functioning Properly with the PE Pre-Test Feature • Perform GFCI Troubleshooting of an Electric Vehicle Charging Station and Verify it is Functioning Properly for Safety • Test Different Charging States of an Electric Vehicle Charging Station with the Turn of a Button. Verify the Charging Voltage Using a Digital Multimeter • CP State Simulation: A: ± 12V 1kHz; B: 2.74k Ω +9 V / -12V 1kHz; C: 882 Ω +6 V / -12V 1kHz; D: 246 Ω +3V / -12V 1kHz • Output Voltage: Max. 250 V / 60 Hz, CAT II 300 V • Compatibility with Other Test and Measurement
E
Tools: Digital Multimeter, Oscilloscope • Safety Testing: Protective Grounding Test (PE), GFCI Test
FEV100-TY1 with Case & Connector
Ordering Information
Mfg #
Description
Order #
Price
Each Unit Includes: Fluke FEV100/BASIC Test Adapter, Fluke FEV-COM/TY1 Type 1 Connector & Cable, Soft Carrying Case, User Manual, 3-Year Warranty.
$ 1,200
5258790
Test Adapter EV Charging Stations with Type 1 Connection & Cable
FEV100-TY1
Call
★ Recommended Transcat Calibration
Fluke PQ400 Electrical Measurement Window
The Fluke PQ400 Electrical Measurement Window enables the connection of three phase measurement equipment to energized panels, without the need to open the panel door, or wear supplemental personal protective equipment.
Specifications
• Reduce the Risk of Arc-Flash and Electrocution, While Increasing the Safety of Your Personnel • Decrease Maintenance Costs and Reduce Downtime by Making Critical Power Quality and Energy Measurements Without Opening the Panel Door, Enabling Logging and Monitoring at Any Time — Without Disrupting Operations • Reduce Work Permit Requirements
Maximum Voltage Between Any Voltage Terminal and Earth Ground 1000 V Maximum Voltage Between Any Voltage Terminal and Earth Ground 30 V General Safety Rating
IEC 61010-1: Pollution Degree 2
Measurement Safety Rating
IEC 61010-2-030: CAT IV 600 V / CAT III 1000 V
148mm x 187mm x 23mm (WxHxD) (148mm x 370mm x 19mm with Cover Opened) 140mm x 158mm x Di (WxHxD) (Di = 58 – Thickness of Panel Door in mm) UL 50/NEMA Environmental Type 1 (Type 12 when PQ400 Cover is Closed)
Exterior Dimensions
Interior Dimensions
Supported Electrical Enclosure
and Processes by Reducing the Hazards Associated with Taking Measurements on Open Panels, Saving Time and Effort • Increase Measurement Efficiency and Reduce the Need for Arcflash PPE1, Saving Time, Increasing Efficiency and Increasing Operator Comfort
PQ400/B
Enclosure Panel Thickness
Max. 3.5mm (10 gauge)
Operating/Storage Temperature
-25°C to 60°C (-13°F to 140°F)
10% to 90% in Dependency of Temperature According to IEC 60721-3-3 Class 3K6 (modified):-25°C to 35°C: 10% to 90%, 50°C: max. 35%, 60°C: max. 23%
Humidity
Number of Inputs 5 (A/L1, B/L2, C/L3, N, and Earth/Ground) Wire Gauge
Solid/flexible: 0.25 mm² to 1.5 mm² (AWG 24 to AWG 16)
Input Voltage
Voltage
Max. 1000 V
PQ400
Fuse
2A 1000V 1.5A²s, 10kA IR (A/L1, B/L2, C/L3, N) 5x 4mm Safety Terminals, 3x Red for A/L1, B/L2, C/L3, 1x Black for N, 1x Green for Earth/Ground
Ordering Information
Connectors
Output Voltage
Mfg #
Description
Order # Price
Load Current
Max. 1 A rms
5x 4-Pin Circular Compatible with Fluke 354x FC, 173x, and 174x Power and Energy Loggers (These Loggers Can All Be Powered from the Measured Voltage Up to 500V)
$
1,796
PQ400/B PQ400 Enclosure
PQ400/B
Current Input/Output Connectors
$ 2,280
PQ400 PQ400 Enclosure, 4xF17XX IFLEX nCable 2m, Markers, Ties PQ400
E42
phone : 800-828-1470 fax : 800-395-0543 TRANSCAT.com • TRANSCAT.ca
Made with FlippingBook Ebook Creator