Process Tester/Loop Calibrator
calibration instruments
Fluke 710 Process Control Valve Tester Featuring built-in test procedures and an intuitive user interface, the 710 allows users to quickly and easily perform valve tests, while the valve test quick-check results provide at-a-glance diagnostics help you make maintenance decisions faster than ever.
• Built in Selectable 250 Ω Resistor for HART Communications • Simple Two Wire Connection for All Measurements • Auto Shutdown to Conserve Battery Life • Variable Step and Ramp Time in Seconds
• Intuitive User Interface with Quick-Set Knob for Fast Setup, Easy to Use • 24 V DC Loop Power with mA Measure Mode (-25 % to 125 %) • Resolution of 1 μA on mA Ranges and 1 mV on Voltages Ranges
• Valve Test Procedures that Deliver Good, Marginal or Bad Assessment of a Control Valve • Generic HART Communication • Best-in-Class mA Accuracy at 0.01 % Measurement or Source Value • Compact Rugged Design
A
Specifications
mA Source, mA Simulate, mA Read, mA Read/Loop Power, and Volts Read
Function
Ranges
mA (0 to 24 mA) and Volts (0 to 30 V DC) 1 µA on mA Ranges and 1 mV on Voltage Range
Each Unit Includes: Stackable Test Lead Set, Extended Tooth Alligator Clip Set, TP220 Test Probes, AC280 SureGrip Hook Clips, Lemo to USB Upload/Download Cable, ValveTrack Software (Free Download), Softcase, Six AAA Batteries (Installed), 709/709H/710 Product Manual CD-ROM 709/709H/710 Quick Reference Guide, 709/709H/710 Safety Information.
Resolution Accuracy
0.01% ± 2 Counts, All Ranges (@ 23 °C ± 5 °C [73.4 °F ± 41 °F])
Operating Temperature Range
-10°C to 55°C (14°F to 131°F)
Humidity Range
10 to 95% Non-Condensing
Ordering Information
Display Power
128 x 64 Pixels, LCD Graphic w/ Backlight, .34 High Digits 6 AAA Alkaline, 40 Hours Continuous Use (Measure Mode Using)
Mfg #
Description
Order #
Price
$ 2,966
4991049
mA Loop, Valve Tester, with HART
710
Dimensions (L x W x D) 15 x 9 x 3 cm (6 x 3.6 x 1.3 in) Weight 0.3 kg (9.5 oz)
ED0301-6
★ Recommended Transcat Calibration
$
264
Additel 209 and 210 Series Loop Calibrators This rugged, easy to use loop calibrator is intuitive and ideal for troubleshooting your process loop.
• Accuracy to 0.01% of Reading • Small and Rugged Handheld Design • Measure, Source, or Simulate Loop Current • Measure DCV
• Simultaneously mA and % Span Display • Switch Functionality • Selectable Ramp and Step Functions • HART 250 Ω Resistor with 24V Loop
Each Unit Includes: Test leads, NIST-Traceable Certificate of Calibration and Manual.
Specifications
Electrical Measure
Range
Resolution ADT209 Accuracy ADT210 Accuracy
Voltage DC ¹ Current DC ² Switch Test
0 to 30 V
1 mV
0.03% RD + 2mV 0.01% RD + 2mV 0.03% RD + 2µA 0.01% RD + 2µA
0 to 24 mA
1µA
Input Resistance More than 500 M Ω Trigger Level: Low Level <0.3V; High Level: >2V
¹ 1M Ω Input Resistance and ² Loop Transmitter Current Measure: 700 Ω Maximum Electrical Source Range
Resolution ADT209 Accuracy ADT210 Accuracy
Current DC
0 to 24 mA
1µA
0.03% RD + 2µA 0.01% RD + 2µA
Source Mode Sink Mode General Loop Power Size (L x W x H)
700 Ω /20 mA Maximum
External Loop Voltage Nominal 24V, Maximum 30V, Minimum 12V
24V
6.4 x 3.3 x 1.6in
Weight
0.77 lbs
Certification
NIST-Traceable Certificate of Calibration with Data
210
Ordering Information
Mfg #
Description
Order # ADT209 ADT210
Price
$
925
ADT209 ADT210
mA Loop Calibrator, 0.03% RD mA Loop Calibrator, 0.01% RD
$ 1,218
ED0301-6 $
264
★ Recommended Transcat Calibration
A13
phone : 800-828-1470 fax : 800-395-0543 TRANSCAT.com
Made with FlippingBook Ebook Creator