Process Meters/Process Calibrator
calibration instruments
Fluke 771, 772 and 773 mA Process Clamp Meters Don’t break the loop on 4-20 mA signal measurements and save time.
• Source 4 to 20 mA Signals for Testing Control System I/O or I/Ps (772/773) • mA Output Linear Ramp or 25% Step Output (772/773) • DC Voltage Measurement to Verify 24V Power Supplies or Voltage I/O Signals (773) • Source DC Voltage to Test Input Devices that Accept a 1-5V or 0 to 10V Signals (773) • Scaled mA Output Provides a Continuous mA Signal that Corresponds to the 4 to 20 mA Signal Measured by the mA Clamp (773) • mA In/Out: Simultaneously Measure the mA Signal with the Clamp and Source a mA Signal (773) • Voltage Output Linear Ramp or 25% Step Output (773)
• Best-in-Class 0.2 % Accuracy • 0.01 mA Resolution and Sensitivity • Measure mA Signals for PLC and Control System Analog I/O • Dual Backlit Display with Both mA Measurement and Percent of 4 to 20 mA Span • Measurement Spotlight Illuminates Hard to See Wires in Dark Enclosures • Detachable Clamp with Extension Cable for Measurements in Tight Locations • Measure 4 to 20 mA Signals with In-Circuit Measurement (772/773) • Simultaneous mA In-Circuit Measurement with 24V Loop Power for Powering and Testing Transmitters (772/773)
A
771 Includes: Soft Carrying Case and User's Manual.
Ordering Information
Mfg #
Description
Order # 45876EL
Price
$
894
FLUKE-771 FLUKE-772 FLUKE-773
Fluke 771 Process mA Clamp Meter Fluke 772 Process mA Clamp Meter Fluke 773 Process mA Clamp Meter
772 & 773 Include: Soft Carrying Case, Test Leads, Alligator Clips, Hanging Strap, and User’s Manual.
$ 1,320 $ 1,676
772 773
773
ED1616-6
$
174
★ Recommended Transcat Calibration
One instrument... Two functions! Combines volt and mA source/read functions into one instrument, reducing acquisition and maintenance costs. Fluke 715 mA/mV/V Process Calibrator
• Accuracy 0.01% • 0.001 mA Resolution • Source and Read 0–24 mA • Source and Read 0–20 V or 0–200 mV • Simulate Two-Wire Transmitters
• Built-In 24V Supply • HART ® Mode with 250 Ω Resistor • Output Ramp and Step Ramp
Specifications Unless otherwise noted, accuracy specifications are expressed as (percent of reading + number of least significant digits) for temperatures 23°C +5°C for one year. Operating Temperature -10°C to 55°C Safety CSA C22.2 No. 1010.1:1992 Power Single 9V Battery ANSI/NEDA 1604A or IEC 6LR61 Size (with Holster) 201mm L x 98mm W x 52mm D (7.93 x 3.86 x 2.06") Weight (with Holster) Approx. 330g Model 715 Range Accuracy Notes V/mV 0 to 200 mV 0 to 20V ±0.01% + 2 Counts ±0.01% + 2 Counts Each Unit Includes: C81Y Protective Yellow Holster and Stand, NIST Traceable Certificate of Calibration, Test Leads and Clips, One 9V Alkaline Battery, and Instruction Sheet.
Ordering Information
Mfg #
Description
Order #
Price
$ 1,604 $ 264
715
mA/mV/V Process Calibrator
715
★ Recommended Transcat Calibration
ED0301-6
Recommended Accessories
$
70
TL28A TL220
Heavy Duty Test Lead Set
TL28 TL20
$ 100
Suregrip Industrial Test Lead Set
$
50
C25
Soft Carrying Case
C25
$ 660 $ 490 $ 195
PV350 I1010
Pressure Vacuum Module
PV350 I-1010
AC/DC Current Clamp 1,000A/600A AC
Sink (Simulate Transmitter) Display mA or % of Span Drive 20 mA into 1,000 Ω
0 to 24 mA (-25% to 125%)
TLK-220
Accessory Set with Case
TLK-220
mA
±0.01% + 2 Counts
Transcat Calibration Labels 1-3⁄4 x 5⁄8" (Pk/128) - Green. See PG. A7 for More Info.
$
25
5353C-G
5353C-G
Loop Power
24 VDC
±10%
A16
phone : 800-828-1470 fax : 800-395-0543 TRANSCAT.com
Made with FlippingBook Ebook Creator