Calibration Furnaces
calibration instruments
Fluke Calibration 9118A Thermocouple Calibration Furnaces High performance furnace for thermocouple calibrations to 1200°C.
• Wide Temperature Range 300°C - 1200°C • Automate Calibration of up to 40 Sensors at a Time Using the 9118A and 1586A Super-DAQ Together
• Operate as an Open-
Ended Furnace or with an Isothermal Block • Best-in-Class Temperature Stability and Radial / Axial Uniformity
A
Each Unit Includes: Type-S Thermocouple (Long), Type-S Thermocouple (Short), Protection Tube (Long), Protection Tube (Short), TC Support Bracket, L-Key, Hex 3mm, Button Head Screw, M5X12 (2 Each), Getting Started Manual, Users Manual CD-ROM, Ground Wire, Serial Cable, USB Cable, Super Wool Insulator, Calibration Certificate, Isothermal Block, Rear Plug, and Rear Plug for Backup.
Ordering Information
Mfg #
Description
Order #
Price
9118A Thermocouple Calibration Furnace without Isothermal Block 9118A Thermocouple Calibration Furnace with Isothermal Block
$ 14,235
9118A-256
9118A-256
$ 22,354
9118A-ITB-256
9118A-ITB
Call
★ Recommended Transcat Calibration
Note: Temperature stability measured as 2-sigma over 30 minutes.
Specifications
9118A (without Isothermal Block)
9118A-ITB (with Isothermal Block)
±0.5°C at 300°C, 700°C, and 1200°C (Measured 14mm (0.6in) from Geometry Central Point) ±0.25°C Full Range (Measured ± 30mm (1.2in) Axial Length from Geometry Central Point)
±0.1°C at 300°C, ±0.20°C at 700°C, and ±0.25°C at 1200°C (Measured Hole-to-Hole)
Radial Uniformity
Axial Uniformity
±0.2°C Full Range (Measured at 60mm (2.4in) From Full Immersion)
Temperature Stability
±0.2°C
±0.1°C
Stabilization Time
2 Hours, Full Range
3 Hours at or Below 700°C, 2 Hours Above 700°C
Heating Time (23 ° C to 1200 ° C) Cooling Time (1200 ° C to 300 ° C)
40 Minutes 180 Minutes
45 Minutes 200 Minutes
Fast heating and cooling saves you time in comparison to competitive models. Fluke Calibration 9150 Dry Block Calibration Furnace 1200°C
9150 Interchangeable Insert Options
• Low-Cost Thermocouple Furnace • Range 150°C to 1200°C • Best Stability and Accuracy
This Thermocouple Furnace, 9150, heats to 1200°C for calibrating industrial thermocouples. The portable furnace features stability of ±0.5°C and full range accuracy of ±5°C. With interchangeable multi-hole temperature blocks, any thermocouple from 1⁄16 inch to 1⁄2 inch can be inserted for quick temperature verification. Weighing less than 30 lbs., the 9150 can be carried on-site to check thermocouples around your plant to 1200°C. Simply plug the furnace into a standard 110 or 220 VAC outlet, set the desired calibration temperature, and it is ready to certify your sensors and switches. The 9150 is the most affordable furnace on the market. Now instead of replacing more expensive noble metal thermocouples, you can afford to check thermocouples in-house and extend their life. Fast heating and cooling also saves you time in comparison to competitive models.
Ordering Information
Mfg #
Description
Order # Price
$ 7,870
9150-A Dry Block Furnace
23070T
★ Recommended Transcat Calibration PT0905-6 $
769
Recommended Accessories
Multi-Hole Insert, (1⁄16", 1⁄8", 3⁄16", 1⁄4", 3⁄8", and 1⁄2") A Multi-Hole Insert, (2" x 3⁄16", 2" x 1⁄4", 2" x 3⁄8") B
$ 1,362
3150-2
3150-2
$ 1,362
3150-3
3150-3
9150-A
$ 1,362 $ 1,179
3150-4 Multi-Hole Insert, (6 x 1⁄4") C 3150-4
Each Unit Includes: Insert 23071T-1, Instructions and Manufacturer’s NIST Calibration.
9315
Carrying Case
9315
A30
phone : 800-828-1470 fax : 800-395-0543 TRANSCAT.com
Made with FlippingBook Ebook Creator