Deadweight Testers/Comparison Test Pumps
calibration instruments
Fluke Calibration E-DWT-H Electronic Deadweight Tester Kits
Hydraulic deadweight tester performance with digital measurement convenience and simplicity.
• 0.02% Reading Total Uncertainty for 1 year (0.025% of Reading for 2 Year Calibration Interval) • No Weights to Load and Unload or Regularly Send Out for Calibration • No Need to Know and Correct for Local Gravity or Ambient Temperature • On-Board, Autotest Calibration Routines and Data Acquisition • Interfaceable with a PC or Laptop to Allow for Automated Data Acquisition • Not Sensitive to Level or Vibration
• COMPASS Compatible for Pressure Software • No Piston-Cylinder Changes; Switch Q-RPT Ranges in Seconds • No Minimum Increment Limited by Smallest Available Masses • Operates in any Unit of Measure • Icluded: (M20 X 1.5, M14 X 1.5, 1/8, ¼, 3/8, ½ NPT and BSP). Adapters Provide Hand Tight Connection of DUT (Rated To 20,000 PSI) • Extended Range Versions Include Low & High Range Q-RPT Pressure Sensors, Allowing for Extreme Flexibility
A
The E-DWT-H has the operational versatility to calibrate and test a broad range of pressure measuring instruments including: ✔ A nalog and Digital Gauges ✔ Transducers ✔ Calibrators ✔ Sensors ✔ Transmitters Each Unit Includes: Liquid Fill Kit, Power Supply with Cord, and Set of Test Port Adapters. Unit is Shipped Dry, to be Filled by the Customer.
Ordering Information
Mfg #
Description
Order #
Price
$ 35,674 $ 35,674
6531-20M E-DWT-H, 20 MPA (3K PSI), 0.02% rdg from 300 to 3,000 PSI 6531-70M E-DWT-H, 70 MPA (10K PSI), 0.02% rdg from 1,000 to 10,000 PSI
6531-20M 6531-70M
$ 28,400
6531-200M E-DWT-H, 200 MPA (30K PSI), 0.02% rdg from 3,000 to 30,000 PSI
6531-200M
6532-70M E-DWT-H, 70 MPA (10K PSI), EXTENDED RANGE, 0.02% rdg from 100 - 10,000 PSI $ 50,928 6532-200M-B E-DWT-H, 200 MPA (30K PSI), EXTENDED RANGE, 0.02% rdg from 600 - 30,000 PSI 6532-200M-B $ 49,548 ★ Recommended Transcat Calibration XX0028-3 $ 475 Recommended Accessories FLUID-401114 Fluid, Sebacate, 1 gal FLUID-401114 $ 262 6532-70M Fluke Calibration P5500 Series Pressurements Hydraulic & Pneumatic Comparison Test Pumps
Fine pressure adjustment and control in a bench top design.
P5514 • Bench Mount Design
P5515 • Built-in Pump for Large Volume Applications and System Priming • High Quality Screw Press for Fine Pressure Control • Acrylic Reservoir for Visibility of Fluid Level and Quality • Test Port Adapters that Require No PTFE Tape or Wrenches • Built-In Drain Plug for Removal of Old Fluid • Sturdy Carrying Case with Lid • Operational with a Wide Range of Fluids
• Screw Press for Fine Pressure Adjustments • Test Connections can be Made without the Need for PTFE Tape or Wrenches • Operates with a Wide Range of Fluids P5510 • Dual Pressure/Vacuum Capability • Bench Mount Design • Built-In Hand Pump as Pressure/Vacuum Source • High Quality Needle Valve for Fine Control • Test Port Adapters that Require No PTFE Tape or Wrenches
P5515
P5514
Ordering Information
P5510
Mfg # P5515 P5514 P5510
Description
Order #
Price
$ $ $ $
7,477 1,835 3,217
Comparison Test Pump 0 to 20,000 PSI Comparison Test Pump 0 to 10,000 PSI
P5515-140M P5514-70M P5510-2M XX0028-3
Comparison Test Pump 0 to 300 PSI, Vacuum 0 to 24 inHg
475
★ Recommended Transcat Calibration
A54
phone : 800-828-1470 fax : 800-395-0543 TRANSCAT.com
Made with FlippingBook Ebook Creator