AMT 2022 Virtual Catalog

This interactive virtual AMT catalog allows you search, navigate, view, and print from our entire standard AMT pump product offering catalog. If you do not see what you are looking for, do not hesitate to call us direct at 610-948-3800

Table Of Contents

CATEGORY

PRODUCT DESCRIPTION

SECTION COLOR

Engine Driven

Dewatering, Solids, Trash, Diaphragm

ENG

Orange

High Pressure and Fire Fighting Engine Driven Pumps

FIRE

Blue

High Pressure / Fire

PED

Green

Pedestal Pumps

Pedestal Drive Pumps

Self-Priming Centrifugal, Utility, Chemical, Sewage/Trash, Sprinkler/Booster

SPE

Red

Self Priming Electrics

HVAC/Multistage

Multistage, Jockey, HVAC/Circulators

HVM

Purple

End Suction, 1750 RPM, Medium Head, High Head, High Flow, Stamped Stainless

STE

Lime

Straight Centrifugal

S ubmersible, Shredder, Utility, Contractor, 12V DC

SUB

Teal

Submersible & Sump

Immersion/Suction Coolant, Heavy Duty Coolant, Bronze Coolant Recirculation, Vertical Sealless Sprayer/Washer Pumps

CLT

Violet

Coolant

Hazardous Duty/Explosion Proof, Custom & Specialty Pumps

SCL

Crimson

Specialty Pumps

Rotary, Hand Diaphragm & Piston Drum Pumps

DRM

Gold

Drum Pumps

Pump Accessories, Hose, Fittings, Roll Frames & Wheel Kit

ACC

Silver

Accessories

Pump Performance and Data is derived from AMT pump specifications. Performance may vary due to setup, application, altitude, suction lift, power source, and other factors. NEW = New Product for 2013

AMT Pump Company (herein “AMT” 400 spring Street Royersford, PA 19468 Phone: (610) 948-3800 Fax: (610) 948-5300 www.amtpump.com

11.4.2018

Self-Priming Engine Driven Utility Pumps • Aluminum Construction • Buna-N Mechanical Seal and O-Ring

Model 1G4XHR

• 1˝ to 3˝ NPT Port Sizes • Portable, Lightweight • Solids Handling and Dirty Water Design • Semi-Open, Clog Resistant Impeller • Engine 4-Cycle Options: u Model 1G4XHR: Honda GX120 u Model GCW2/GCW3: Honda GC160 with Oil Alert

Performance of Engine Driven Utility Pumps

100 30 [m] [ft.*]

A = 1G4XAR B = GCW2 C = GCW3

Model GCW2

The AMT/IPT line of Engine Driven Utility pumps offers economy, durability, portability and performance all in one neat package. Ideal for general purpose dirty water dewatering, irrigation, spraying, washdown and agricultural applications. Pumps are designed to handle liquids with solids content or dissolved solids and debris.

[U.S. gpm] [m 3 /h]

0 20 40 60 80 100 120 140 160 180 200 220 240

0 5 10 15 20 25 30 35 40 45 50

Capacity (*)Convert to psi, divide by 2.31 Liquid - Water specific gravity 1.0

4382-C00-W0_GCW_Series_Added 4/13/2021

400 Spring Street • Royersford, PA 19468 USA www.amtpump.com • 888-amt-pump (268-7867) For use with nonflammable liquids compatible with pump component materials.

ENG-1

Viton ® and Teflon ® are registered trademarks of E. I. Dupont.

A Gorman-Rupp Company

® A Gorman-Rupp Company Engine Driven Utility Pumps

1" Utility Pump

Run Time (Hours)

Tank Size (Gal/Ltr.)

Ship Wt. (Lbs.)

Model

Curve

Driver

1G4XHR

Honda GX120

2.0

0.52/2.0

Construction: Cast Aluminum

Maximum Solids Handling Capacity: 1/4" Diameter

Standard Features

Run Time (Hours)

Tank Size (Gal/Ltr.) 0.15/0.57

Ship Wt. (Lbs.)

• (2) Garden Hose Adapters • Buna-N Mechanical Seal and O-ring • O-ring Casing Seal • Semi-open, Clog Resistant Impeller • Self-primes to 15 Ft. • Maximum Temperature 180° F • Maximum Working Pressure 75 PSI • Delivers up to 39 PSI • Dual Volute Design • Maximum of 75 GPM • Includes Heavy Duty Steel Roll Frame • QSP – Quick Ship Pump

Model

Curve

Driver

1G1XH

C A

Honda GX25

1.2

4382-96

Honda GXH50

Maximum Solids Handling Capacity: 3/32" Diameter 25 0.20/0.76 2

Construction: Cast Aluminum

1G4XAR shown

2"-3" General Purpose Pumps

Run Time (Hours)

Tank Size (Gal/Ltr.)

Ship Wt. (Lbs.)

Model

Curve

Driver

Run Time (Hours)

40 Tank Size (Gal/Ltr.)

Ship Wt. (Lbs.)

1G4XAR

Briggs & Stratton Curve

1.2 Driver

0.52/2.0

Model

Maximum Solids Handling Capacity: 1/4" Diameter 0.47/.71 1.5 Honda GC160

Construction: Cast Aluminum GCW2

GCW3

Honda GC160

1.5

0.47/.71

Model Construction: Cast Aluminum HP Class ♦

SUC* DIS* Maximum Solids Handling Capacity: 1/4" Diameter L** W**

Curve

1G4XAR 4382-96

1 1

20.0 [50.8] 13.2 [33.5]

17.5 [44.4] 10.8 [27.4]

17.6 [44.7] Standard Features • Buna-N Mechanical Seal and O-ring • O-ring Casing Seal • Semi-open, Clog Resistant Impeller • Self-primes to 20 Ft. • Maximum Temperature 180° F • Maximum Working Pressure 75 PSI 14.6 [37.0]

4 HP 2 HP

B A

( ♦ ) HP Class represents market category and is not intended to define actual horsepower. (*) Standard NPT (Female) pipe thread. (**) This dimension may vary due to engine manufacturer’s specifications. NOTE: Dimensions are in inches (centimeters) and have a tolerance of ± 1/8".

• Delivers up to 38 PSI • Maximum of 205 GPM

• Includes Heavy Duty Steel Roll Frame, Hose Clamps, Strainer, and Hose Fittings • QSP – Quick Ship Pump

HP Class ♦

Model

Curve

SUC*

DIS*

L**

W**

1G4XHR

4HP 5HP 5HP

A B C

1 2 1 3

1 2 3

N/A

H 20.0 [50.8] 20.0 [50.8]

17.5 [44.4] 17.5 [44.4] 17.5 [44.4]

17.6 [44.7] 17.6 [44.7] 17.6 [44.7]

Model

Curve

SUC*

DIS*

L**

17.5 [44.4] 5.3 [13.3] W**

GCW2 GCW3

6.6 [16.8] 7.5 [19.0]

HP Class ♦

1G4XHR

4 HP

20.0 [50.8]

17.6 [44.7] 6 3 15 9 20.0 [50.8]

Manufacturer of AMT & IPT Pumps 400 Spring Street • Royersford, PA 19468 USA

www.amtpump.com • 888-amt-pump (268-7867) The Gorman-Rupp Company reserves the right to discontinue any model or change specifications at any time without incurring any obligation. ©2012 American Machine and Tool Company. All rights reserved.

A Gorman-Rupp Company

0515 421

ENG-2

2˝ Self-Priming Engine Driven AG/Dewatering Pumps • Cast Iron or Thermoplastic Construction • Buna-N, EPDM or Viton ® Mechanical Seal (Depending on Model) • Optional Seals Available • 2˝ NPT Port Size • Self-Priming up to 20 Ft. • Semi-Open, Clog Resistant Impeller • Solids Handling and Dirty Water Design • Engine Options: Honda or LCT Storm Force Gasoline • Carry Handle Included • Heavy Duty Steel Base Installed on Cast Iron Models • Built-in Check Valve

2" Dewatering Cast Iron Pump

2" Thermoplastic Pump

Performance of Engine Driven Dewatering Pumps

Performance of Engine-Driven Dewatering Pumps

[m] [ft.*]

140

The AMT line of Engine Driven Dewatering pumps offers economy, durability, portability and performance all in one neat package. Ideal for dirty water dewatering, irrigation, spraying, washdown and agricultural applications. Pumps are designed to handle liquids with solids content or dissolved solids and debris. Cast iron pumps feature dual volute design that reduces radial load on engine. Built-in check valve enables constant self-priming to 20 feet. Pump construction materials available in cast iron or corrosive resistant polypropylene components featuring removeable/replaceable volute and impeller. Pumps are available with Honda or LCT Storm Force engines. Viton ® , EPDM and Silicon Carbide mechanical seal options are available on specific models.

A = 422 Series B = 382A-99, 2AG5LPE

120

100

A B

[U.S. gpm] [m 3 /h]

0 20 40 60 80 100 120 140 160 180 200 220

5 10 15 20 25 30 35 40 45

Capacity (*)Convert to psi, divide by 2.31 Liquid - Water specific gravity 1.0

382A-C02-W0_LCT_Engines.xlsx 3/23/2021

400 Spring Street • Royersford, PA 19468 USA www.amtpump.com • 888-amt-pump (268-7867) For use with nonflammable liquids compatible with pump component materials.

ENG-3

Viton ® and Teflon ® are registered trademarks of E. I. Dupont.

A Gorman-Rupp Company

® A Gorman-Rupp Company Engine Driven AG/Dewatering Pumps

2" Cast Iron AG/ Dewatering Pumps

Run Time (Hours)

Tank Size (Gal/Ltr.) 0.47/1.7

Ship Wt. (Lbs.)

Model

Curve Port A 2" NPT A 2" NPT

Driver

Seal

4225-V5 4225-95

Honda GC160 Honda GC160

Buna-N

1.5 1.5

70 70

0.47/1.7

Viton ®

Run Time (Hours)

Tank Size (Gal/Ltr.) 0.47/1.7

Ship Wt. (Lbs.)

Construction: Cast Iron

Maximum Solids Handling Capacity: 3/8" Diameter

Model

Curve Port A 2" NPT A 2" NPT

Driver

Seal

4225-V5 4225-95

Honda GC160 Honda GC160

Buna-N

1.5 1.5

70 70

Standard Features

0.47/1.7

Viton ®

Run Time (Hours)

Tank Size (Gal/Ltr.) 0.47/1.7

Ship Wt. (Lbs.)

Model

Curve Port A 2" NPT A 2" NPT

Driver

Seal

Construction: Cast Iron

Maximum Solids Handling Capacity: 3/8" Diameter

Seal • (2) NPT Pip Nipples • Buna-N or Viton ® Mechanical Seal, Depending on Model • Optional Silicon Carbide Mechanical Seals • Built-in Check Valves • Fiber Gasket Casing Seal • Self-primes to 20 feet • Semi-open, Clog Resistant Impeller • Engine Shaft Prot cted with tainless teel Shaft Sleeve • Maximum Temperature 180° F Run Time (Hours) Ship Wt. (Lbs.) Maximum Solids Handling Capacity: 3/8" Diameter Viton ® 1.5 1.5 0.47/1.7 70 70 Buna-N

4225-V5 4225-95

Honda GC160 Honda GC160

Construction: Cast Iron

0.47/1.7 0.71/2.7 Tank Size (Gal/Ltr.)

Model

Curve Port

Driver

382A-99 2AG5LPE

2" NPT 2" NPT

Honda GC160

1.5

45 45

Buna-N

Ship Wt. (Lbs.) • Maximum Working Pressure 75 PSI • Delivers a Maximum of 180 GPM • Dual Volute Design • QSP – Quick Ship Pumps EPDM 2.2

LCT 208CC

Construction: Polypropylene

Maximum Solids Handling Capacity: 7/16" Diameter

Run Time (Hours)

0.47/1.7 0.71/2.7 Tank Size (Gal/Ltr.)

Model

Curve Port

Driver

Seal

382A-99 2AG5LPE

2" NPT 2" NPT

Honda GC160

1.5

45 45

Buna-N

LCT 208CC

EPDM 2.2

Construction: Polypropylene 2" Thermoplastic AG/ Dewatering Pumps

Run Time (Hou s)

0.47/1.7 0.71/2.7 Tank Size (Gal/Ltr.)

Ship Wt. (Lbs.)

Maximum Solids Handling Capacity: 7/16" Diameter Driver Seal

Model

Curve Port

382A-99 2AG5LPE

2" NPT 2" NPT

Honda GC160

1.5

45 45

Buna-N

LCT 208CC

EPDM 2.2

Construction: Polypropylene

Maximum Solids Handling Capacity: 7/16" Diameter

Standard Features

W** • (2) NPT Pipe Nipples • Buna-N or EPDM Mechanical Seal and Check Valve • O-ring Casing Seal • Self-primes to 20 feet with Built-in Check Valve • Replaceable Volute • Maximum Temperature 130° F • Maximum Working Pressure 60 PSI • Delivers up to 48 PSI with a Maximum of 190 GPM • QSP – Quick Ship Pumps H**

( ♦ ) HP Class represents market category a not intended to define actual horsepower. (*) Standard NPT (Female) pipe thread. (**) This dimension may vary due to engine manufacturer’s specifications. NOTE: Dimensions are in inches (centime and have a tolerance of ± 1/8".

Model

HP Class ♦

SUC* DIS*

L**

382/2AG Series

5 HP 5 HP

2 2

2 18.8 [47.7] 15.6 [39.6] 12.7 [32.2] 2 16.1 [40.8] 19.4 [49.2] 16.1 [40.8]

4225 Series

Model

HP Class ♦

SUC* DIS*

L**

W**

H**

382/2AG Series

5 HP 5 HP

2 2

2 18.8 [47.7] 15.6 [39.6] 12.7 [32.2] 2 16.1 [40.8] 19.4 [49.2] 16.1 [40.8]

4225 Series

Model

HP Class ♦

SUC* DIS*

L**

382/2AG Series

5 HP 5 HP

2 2

2 18.8 [47.7] 15.6 [39.6] 12.7 [32.2] 2 16.1 [40.8] 19.4 [49.2] 16.1 [40.8]

4225 Series

Manufacturer of AMT & IPT Pumps 400 Spring Street • Royersford, PA 19468 USA

A Gorman-Rupp Company

1212 0421

ENG-4

2˝ Self-Priming Cast Iron Gasoline & Diesel Driven Solids Handling Pumps

• Heavy Duty Cast Iron Construction • EPDM/EPR Mechanical Seal, O-Rings and Gaskets • 2˝ NPT Port Sizes • Self-Priming up to 20 Ft. • Semi-Open, Clog Resistant Impellers • Solids Handling and Dirty Water Design • Maximum Solids Handing 1/2˝ • Built-in EPDM/EPR Check Valve • Engine Options: Honda Gasoline or Hatz Diesel • Heavy Duty Steel Roll Frame Included • Optional Wheel Kit Available

Model 2G5XQCR

Performance of Engine Driven Pumps

Performance of Engine-Driven Pumps

[m] [ft.*]

140

A = 2G5X Series

120

The IPT line of Cast Iron Engine Driven Solids Handling pumps offers an upgraded debris handling capability in wear resistant cast iron construction. Applications include: high volume liquid transfer, agriculture/ liquid fertilizer, irrigation, dirty water commercial draining and construction. Pumps are designed to handle liquids with solids content or dissolved solids and debris. All models feature durable all cast iron construction and clog-resistant impeller to ensure a long life for the complete pump. Dual volute design reduces radial load on engines. Simple four bolt design for easy cleanout, tool included. EPDM/ EPR seal and gaskets for use with many anti-freeze, alcohols, ozone, freon, etc. Check your specific chemical for compatibility.

100

[U.S. gpm] [m 3 /h]

0 20 40 60 80 100 120 140 160 180 200 220

0 4 8 12 16 20 24 28 32 36 40 44 48 Capacity (*)Convert to psi, divide by 2.31 Liquid - Water specific gravity 1.0

2G4X-C00-W0_B&S_Engines_Removed.xlsx 5/22/2020

400 Spring Street • Royersford, PA 19468 USA www.amtpump.com • 888-amt-pump (268-7867) For use with nonflammable liquids compatible with pump component materials.

ENG-5

Viton ® and Teflon ® are registered trademarks of E. I. Dupont.

A Gorman-Rupp Company

Engine Driven Solids Handling Pumps

Pump Dimensional & Specification Data

Features • Heavy Duty Cast Iron Construction Ensures Durability for Severe Service Conditions • O-Ring Casing Seal for Ease of Service and Cleaning • Maximum Working Pressure 75 PSI • Maximum Temperature 200° F 25 Ship Wt. (Lbs.) Standard Features • Simple Four Bolt Design for Easy Cleanout, Tool Included • EPDM/EPR Mechanical Seals, O-Rings and Gaskets • Discharge Ports Rotate in 90° Increments • Maximum Flow 182 GPM • Maximum Head 106 Ft. • Dual Volute Design for Hydraulic Balance • Self-Primes to 10 Feet in 1 Minute with Maximum Suction Lift of 20 Feet • Heavy Duty Steel Roll Frame for Portability

Run Time (Hours)

Tank Size (Gal/Ltr.)

Ship Wt. (Lbs.)

Model

Curve Port

Driver

Seal

2G7XZCR 2G5XQCR

2" NPT 2" NPT

Hatz Diesel 1B30

EPDM/EPR 2.7

0.79/3.0 115

Construction: Cast Iron A

Honda GC160 OHV EPDM/EPR 1.5

0.47/1.7

Maximum Solids Handling Capacity: 1/2" Diameter

2" Gasoline Solids Handling Pumps

Optional Wheel Kit For Roll Frame Pumps

Model

HP Class ♦

SUC*

DIS*

L**

W**

H 23.6 [59.9] 17.6 [44.8]

Model

Includes 10” semi-pneumatic tires on steel wheels with clamps and steel handle for universal mounting to frame.

2G7XZCR

5 HP

2 31.0 [78.7]

22.5 [57.1]

C402-90

2G5XQCR

5 HP

2 20.8 [52.8]

17.5 [44.5]

( ♦ ) HP Class represents market category and is not intended to define actual horsepower (*) Standard NPT Pipe Thread

Run Time (Hours) Run Time (Hours)

Tank Size (Gal/Ltr.) Tank Size (Gal/Ltr.)

Ship Wt. (Lbs.) Ship Wt. (Lbs.)

2" Diesel Solids Handling Pumps Seal

(**) This dimension may vary due to engine manufacturer’s specifications. NOTE: Dimensions are in inches [centimeters] and have a tolerance of ±1/8”. Model Curve Port Driver

2G7XZCR 2G5XQCR 5 Q Model 2G7XZCR

Curve Port A 2" NPT

Hatz Diesel 1B30 Honda GC160 OHV Driver Hatz ies l 1B30

EPDM/EPR 2.7 1.5 Seal EPDM/EPR 2.7 /

0.79/3.0 115 .47/1.7 90 0.79/3.0 115

2" NPT 2" NPT

0.47/1.7 Maximum Solids Handling Capacity: 1/2" Diameter 90

Construction: Cast Iron A Construction: Cast Iron

Honda GC160 OHV EPDM/EPR 1.5

Maximum Solids Handling Capacity: 1/2" Diameter

Features Includes 10” semi-pneumatic tires on steel wheels with clamps and steel handle for universal mounting to frame. Optional Wheel Kit For Roll Frame Pumps Optional Wheel Kit For Roll Frame Pumps Includes 10” semi-pneumatic tires on steel wheels with clamps and steel handle for universal mounting to frame. Features

Ship Wt. (Lbs.) Ship Wt. (Lbs.)

Model

HP Class ♦

SUC*

DIS*

L**

W**

H 23.6 [59.9] 17.6 [44.8] H 23.6 [59.9] 17 44 8

Model

HP Class ♦ 5 HP

SUC* 2

DIS*

L** 2 31.0 [78.7]

W** 22.5 [57.1]

Model 2G7XZCR

C402-90

2G7XZCR 5 Q

5 HP

2 31.0 [78.7]

22.5 [57.1] 20 8 52 8 17 44 5

C402-90

2G5XQCR 2 20.8 [52.8] ( ♦ ) HP Class represents market category and is not intended to define actual horsepower (*) Standard NPT Pipe Thread 5 HP 2 17.5 [44.5] ( ♦ ) HP Class represents market category and is not intended to define actual horsepower (*) Standard NPT Pipe Thread (**) This dimension may vary due to engine manufacturer’s specifications. NOTE: Dimensions are in inches [centimeters] and have a tolerance of ±1/8”. (**) This dimension may vary due to engine manufacturer’s specifications. NOTE: Dimensions are in inches [centimeters] and have a tolerance of ±1/8”.

Manufacturer of AMT & IPT Pumps 400 Spring Street • Royersford, PA 19468 USA

A Gorman-Rupp Company

1212 020

ENG-6

2˝ Self-Priming Engine Driven Dredging Pumps • High Chromium Stainless Steel Internal Components Resist Wear from Sea Water Mixed with Abrasive Sand • Silicon Carbide Mechanical Seal Resists Abrasives and Extends Seal Life • Heavy Duty Cast Iron Casing and Adapter Ensures Durability for Severe Service Conditions • O-Ring Casing Seal for Ease of Service and Cleaning • Engine Options: Honda Gasoline & Hatz Diesel Engines • Solids Handlings and Dirty Water Design • Maximum Solids Handling 1/2˝ • Self-Primes to 10 Feet in 1 Minute with Maximum Suction Lift of 20 Feet • Maximum Flow 173 GPM • Discharge Pressure up to 44 PSI

Model 316F-95 Dredging Pump

Performance of Engine Driven Dredging Pumps

AMT Engine Driven Dredging Pump is designed for pumping sea water and fresh water containing solids up to 25% sand, debris and other abrasive particles. This unit can be used for other marine applications including dredging, pile driving, pier maintenance, emergency bilging and wash down. This pump is constructed of wear resistant high chromium stainless steel internal components that are designed to last for over 500 hours of service with regular maintenance of rinsing pump after each use. The high chromium stainless steel components are investment cast and CNC machined for maximum efficiency, performance and quality. Dual volute design reduces radial load on engine. The 4-bolt casing design and removable type volute offers simple maintenance and fast cleanout of the pump.

[m] [ft.*]

140

A = 316F Dredging Pumps

120

100

0 20 40 60 80 100 120 140 160 180 200 [U.S. gpm]

[m 3 /h]

0 4 8 12 16 20 24 28 32 36 40 44 Capacity (*)Convert to psi, divide by 2.31 Liquid - Water specific gravity 1.0

400 Spring Street • Royersford, PA 19468 USA www.amtpump.com • 888-amt-pump (268-7867) For use with nonflammable liquids compatible with pump component materials.

ENG-7

Viton ® and Teflon ® are registered trademarks of E. I. Dupont.

A Gorman-Rupp Company

® A Gorman-Rupp Company Engine Driven Dredging Pumps

Run Time (Hours)

Tank Size (Gal/Ltr.)

Ship Wt. (Lbs.)

Pump Dimensional & Specification Data Model Port Driver Se ls

Run Time (Hours) Honda GX160 OHV ▲

0.82/3.1 Silicon Carbide Mechanical Seals with Buna-N Built In Check Valve & O-rings Tank Size (Gal/Ltr.)

Ship Wt. (Lbs.)

316F-95

2.0

0.82/3.1

Model

Port

Driver

Seals

2 " NPT

Honda GX160 OHV ▲ 316F-Z5

2.0 Hatz Diesel 1B30

2.7

110

0.79/3.0

316F-95

Silicon Carbide Mechanical Seals with Buna-N Built In Check Valve & O-rings

2.7 Pedestal Ball Bearing w/ 3/4 " Keyed Shaft

2 " NPT

Hatz Diesel 1B30 316F-99

N/A

316F-Z5

110

0.79/3.0

N/A Construction: Cast Iron with High Chromium Stainless Steel Wear Parts

50 Maximum Solids Handling Capacity: 1/2" Diameter ▲ Oil Alert Included

Pedestal Ball Bearing w/ 3/4 " Keyed Shaft

316F-99

N/A

Construction: Cast Iron with High Chromium Stainless Steel Wear Parts

Maximum Solids Handling Capacity: 1/2" Diameter ▲ Oil Alert Included

Model

HP Class ♦ SUC* DIS*

L**

W**

316F-95

24.0 [60.9]

19.2 [48.7]

18.6 [47.2]

5 HP

Model

HP Class ♦ SUC* DIS*

L**

W** 2

2 31.0 [78.7]

22.5 [57.1]

23.6 [59.9]

5 HP

2 316F-Z5 316F-99 ✦

316F-95

18.6 [47.2]

24.0 [60.9] N/A

19.2 [48.7] 2

5 HP

15.1 [38.3]

8.0 [20.3]

8.9 [22.6]

2 ( ♦ ) HP Class represents market category and is not intended to define actual horsepower. (*) Standard NPT (Female) pipe thread. 15.1 [38.3] 8.0 [20.3] 8.9 [22.6] ( ✦ ) Minimum 5 HP Required (**) This dimension may vary due to engine manufacturer’s specifications. NOTE: Dimensions are in inches (centimeters) and have a tolerance of ± 1/8". 2 31.0 [78.7] 22.5 [57.1] 23.6 [59.9]

5 HP

316F-Z5 316F-99 ✦

( ✦ ) Minimum 5 HP Required

N/A

Standard Features

• High Chromium Stainless Steel Internal Components Resist Wear from Sea Water Mixed with Abrasive Sand • Silicon Carbide/Buna-N Mechanical Seal Resists Abrasives and Extends Seal Life • Heavy Duty Cast Iron Casing and Adapter Ensures Durability for Severe Service Conditions • O-ring Casing Seal for Ease of Service and Cleaning • Maximum Working Pressure 75 PSI • Maximum Temperature 180° F

• Maximum Flow 173 GPM • Dual Volute Design for Hydraulic Balance • Maximum Head 101 Ft. @ Sea Water (42 PSI) • Self-Primes to 10 Ft. in 1 Minute with Maximum Lift of 20 Ft. • (2) NPT Pipe Nipples, (1) Discharge Elbow and (1) Suction Strainer Included • Heavy Duty Steel Roll Frame for Portability

Manufacturer of AMT & IPT Pumps 400 Spring Street • Royersford, PA 19468 USA

A Gorman-Rupp Company

0714 1020

ENG-8

Self-Priming Gasoline & Diesel Driven Solids Handling Pumps • Heavy Duty Cast Iron Construction • Buna-N or Viton ® Mechanical Seal Options • 2˝ to 3˝ NPT Port Sizes • Self-Priming up to 20 Ft. • Semi-Open, Clog Resistant Impeller • Solids Handling and Dirty Water Design

Model 3168-95 2" Cast Iron Solids Handling Pumps

• Engine Options: Honda Gasoline or Hatz Diesel

• Electric Start Options Available • Heavy Duty Steel Roll Frame Included • Optional Wheel Kit Available • Built-in Check Valve

Performance of Engine Driven Solids Handling Pumps

Performance of Engine-Driven Solids Handling Pumps

[m] [ft.*]

Model 327A-V5 3" Cast Iron Solids Handling Pump

140

A = 2" 316 Series B = 3" 327 Series C = 3" 339 Series

120

100

The AMT line of Engine Driven Solids Handling pumps offers an upgraded debris handling capability in wear resistant cast iron construction. Applications include: high volume liquid transfer, irrigation, dirty water commercial draining and construction. Pumps are designed to handle liquids with solids content or dissolved solids and debris All models feature durable all cast iron construction and clog-resistant impeller to ensure a long life for the complete pump. Dual volute design reduces radial load on engines.

B C

[U.S. gpm] [m 3 /h]

0 40 80 120 160 200 240 280 320 360 400

0 8 16 24 32 40 48 56 64 72 80 88 Capacity (*)Convert to psi, divide by 2.31 Liquid - Water specific gravity 1.0

3160-C01-W0_B&S_Engines_Removed.xlsx 5/22/2020

400 Spring Street • Royersford, PA 19468 USA www.amtpump.com • 888-amt-pump (268-7867) For use with nonflammable liquids compatible with pump component materials.

ENG-9

Viton ® and Teflon ® are registered trademarks of E. I. Dupont.

A Gorman-Rupp Company

® A Gorman-Rupp Company Engine Driven Solids Handling Pumps

Seals Buna-N Buna-N 180° F Viton ® 200° F • Maximum Working Pressure 75 PSI • Wear Re istant C st Iron Construction and Solids Handling Impeller • Built-in Check Valve 1.5 80 Maximum Solids Handling Capacity: 3/8" Diameter 0.47/1.7 Run Time (Hours) Tank Size (Gal/Ltr.) Ship Wt. (Lbs.) 0.47/1.7 110 • Heavy Duty Ste l Roll Frame Included • Pipe Nipple/Discharge Elbow/Strainer 1.5 2.7 Run Time (Hours) Run Time (Hours) 0.79/3.0 125 Buna-N 1.3 Viton ® 2 5 – 316 Series Includes: (1) Pipe Nipples, (1) Discharge Elbow & (1) Strainer 0.95/3.6 140 1.40/5.2 7 1.40/5.2 170 2.4 8 0.87/3.2 200 1 32 5 0 15 – 327/339 Ser es Includes: (1) Pipe Nipple, (1) MNPT D scharge Elbow & (1) Strainer • QSP – Quick Ship Pumps for Many Models Viton ® 2.5 Seals Tank Size (Gal/Ltr.) Tank Size (Gal/Ltr.) Ship Wt. (Lbs.) Ship Wt. (Lbs.) Standard Features • Viton ® or Buna-N Mechanical Seals Options • Self-primes to 20 Ft. • Semi-open, Clog Resistant Cast Iron Impeller • Stainless Steel Shaft Sleeve • Maximum Temperature:

2" Solids Handling Pumps

Run Time (Hours)

Tank Size (Gal/Ltr.)

Ship Wt. (Lbs.)

Model

Curve Port

Driver

Seals Buna-N

3168-95

A 2" NPT Honda GC160

1.5 80 Maximum Solids Handling Capacity: 3/8" Diameter 0.47/1.7

Construction: Cast Iron

Run Time (Hours) 2 5 5 Run Time (Hours) 2.4 8 Model 3168-95 2.7 Run Time (Hours) Run Time (Hours) 1.5

Tank Size (Gal/Ltr.) Tank Size (Gal/Ltr.)

Ship Wt. (Lbs.) 7 Ship Wt. (Lbs.) Ship Wt. (Lbs.) Ship Wt. (Lbs.)

Model

Curve Port

Driver

Seals

3270-D5 Model

0.79/3.0 125

C 3" NPT Hatz Diesel 1B20 Viton ® Curve Port riv r Seals

327A-V5

C 3" NPT B

Honda GC160 Viton ®

0.47/1.7 110 0.87/3.2 200 15 Tank Size (Gal/Ltr.)

Tank Size (Gal/Ltr.) 1.40 5.2 1 32 5 0 Curve Port

Driver

D 3" NPT Yanmar Diesel L70 ++ ▲ Viton ® C Hatz Dies l 1B30 + ▲ Curve Port

Model 3390-95 3391-D5 Z Model 1 V 168 9

Driver Dr ver

Seals Buna-N Viton ® Viton ® Seals n -

A 2" NPT Honda GC160

Curve Port E 3" NPT B & S Vanguard ▲ Honda GX270 ++ A 2 P Honda GC160 A 2" NPT Honda GC160 E 3" Honda GX270 ++ ▲ C

1.5 80 Maximum Solids Handling Capacity: 3/8" Diameter 0.47/1.7 1.40/5.2 17 80 Maximum Solids Handling Capacity: 3/8" Diameter Buna-N 1.3 0.95/3.6 140 47/1 7 2. axi u Solids Handling Capacity: 3/4" Diameter Construction: Cast Iron

3168-95 391-V Construction: Cast Iron Construction: Cast Iron Construction: Cast Iron

( ♦ ) HP Class represents market category and is not intended to define actual horsepower (*) Standard NPT pipe thread

(**) This dimension may vary due to engine manufacturer’s specifications. NOTE: Dimensions are in inches (centimeters) and have a tolerance of ± 1/8". ++ 12V DC Electric Start (Battery Not Included) ▲ Oil Alert Included

Model

Curve Port

Driver

2.7 Run Time (Hours) Run Time (Hours) Run Time (Hours) 2.7 i ( r )

Tank Size (Gal/Ltr.) Tank Size (Gal/Ltr.) Tank Size (Gal/Ltr.) k Size ( l/ tr.)

Ship Wt. (Lbs.) Ship Wt. (Lbs.) Ship Wt. (Lbs.) Ship Wt. (Lbs.)

3270-D5 Model

C 3" NPT Hatz Diesel 1B20 Viton ® Curve Port riv r Seals

327A-V5 327A-V5 3270-D5 Model 3270-D5 l Model Model 3390-95 1 V 3391-D5 Z 0 9 V 3391-D -Z

C 3" NPT B Model C 3" PT B Curve Port Curve Port D " "

Driver Driver

Seals Seals

3" Solids Handling Pumps

327A-V5

0.47/1.7 110 0.47/1.7 110 0.79/3.0 125 0.79/3.0 125 C 3" NPT B W**

Honda GC160 Viton ®

C 3" NPT Hatz Diesel 1B20 Viton ® Curve Port riv r Seals C 3" NPT Hatz ies l 1B20 Viton ® r rt ri r l

D 3" NPT Yanmar Diesel L70 ++ ▲ Viton ® C Hatz Dies l 1B30 + ▲

3391-D5 Z

1.5 1.5 2.4 8 2.4 8 5

Honda GC160 Viton ® Honda GC160 Viton ® ®

H E 3" NPT B & S Vanguard ▲ C Honda GX270 ++ E 3" NPT Honda GX270 ++ ▲ 0.87/3.2 200 1 32 5 0 5

3390-95 1 V

HP Class ♦

L**

SUC* 2" FNPT 3" FNPT 3" FNPT

DIS* 2" FNPT it

Yanmar Diesel L7 ++ ▲ Hatz Dies l 1B30 + ▲

3391-V5

D 3" NPT Yanmar Diesel L70 ++ ▲ Viton ® C Hatz Diesel 1B30 ++ ▲ 316 Series 5 HP B & S Vanguard ▲ Honda GX270 ++ ▲ i E

0.87/3.2 200 1 32 5 0 15 20.0 [50.8] 17.5 [44.4] 17.6 [44.7] Construction: Cast Iron 1.40/5.2 0 95 3 6 140 7

Buna-N 1.3 Viton ® 2.5 Buna-N 1 3

Maximum Solids Handling Capacity: 3/4" Diameter

E 3" NPT B & S Vanguard ▲ C " Honda GX270 ++ 327 Series 5 HP ++ ▲ E 3" NPT Honda GX270 ++ ▲ 339 Series 8 HP "

0.95/3.6 140 1.40/5.2 7 24.0 [60.9] 19.2 [48.7] 18.6 [47.2] ( ♦ ) HP Class represents market category and is not intended to define actual horsepower (*) Standard NPT pipe thread 2.5 (**) This dimension may vary due to engine manufacturer’s specifications. NOTE: Dimensions are in inches (centimeters) and have a tolerance of ± 1/8". ++ 12V DC Electric Start (Battery Not Included) ▲ Oil Alert Included 1.40/5.2 170 31.0 [78.7] 22.5 [57.1] 23.6 [59.9] . . / .

Viton ® 3" MNPT 3" MNPT it n ®

3391-V5 Construction: Cast Iron

Maximum Solids Handling Capacity: 3/4" Diameter Maximum S lids Handling Capacity: 3/4" Diameter

Construction: Cast Iron ( ♦ ) HP Class represents market category and is not intended to define actual horsepower (*) Standard NPT pipe thread ( ♦ ) HP Class represents market category and is not intended to define actual horsepower (*) Standard NPT pipe thread (**) This dimension may vary due to engine manufacturer’s specifications. NOTE: Dimensions are in inches (centimeters) and have a tolerance of ± 1/8". ++ 12V DC Electric Start (Battery Not Included) ▲ Oil Alert Included (**) This dimension may vary due to engine manufacturer’s specifications. NOTE: Dimensions are in inches (centimeters) and have a tolerance of ± 1/8". ++ 12V DC Electric Start (Battery Not Included) ▲ Oil Alert Included

HP Class ♦

Model

L**

W**

SUC* 2" FNPT 3" FNPT 3" FNPT

DIS* 2" FNPT 3" MNPT 3" MNPT

316 Series

5 HP

20.0 [50.8] 17.5 [44.4] 17.6 [44.7]

HP Class ♦ SUC* DIS*

Model

L**

W**

327 Series

5 HP

24.0 [60.9] 19.2 [48.7] 18.6 [47.2]

316 Series Model

HP Class ♦ HP Class ♦ 4/5 HP

2 20.0 [50.8]

17.5 [44.4]

17.6 [44.7] 8 HP

339 Series W**

31.0 [78.7] 22.5 [57.1] 23.6 [59.9]

SUC* 2" FNPT 3" FNPT 3" FNPT SUC* 2" FNPT 3" FNPT " F

L** L**

H H

DIS* 2" FNPT 3" MNPT 3" MNPT DIS* 2" FNPT 3" MNPT "

Model ( ♦ ) HP Class represents market category and is not intended to define actual horsepower (*) Standard NPT (Female) Pipe Thread (Discharge Elbow Not Shown). (**) This dimension may vary due to engine manufacturer’s specifications. NOTE: Dimensions are in inches (centimeters) and have a tolerance of ± 1/8". 316 Series 316 Series 5 HP 5 HP 24. [6 .9]

W** ( ♦ ) HP Class represents market category and is not intended to define actual horsepower (*) Standard NPT (Female) pipe thread. (**) This dimension may vary due to engine manufacturer’s specifications. NOTE: Dimensions are in inches (centimeters) and have a tolerance of ± 1/8". 9.2 [ 8.7] 8. [ 7.2]

20.0 [50.8] 17.5 [44.4] 17.6 [44.7] 20.0 [50.8] 17.5 [44.4] 17.6 [44.7] 24.0 [60.9] 19.2 [48.7] 18.6 [47.2] 31. [78.7] 22.5 [57.1] 23. [59.9] 31.0 [78.7] 22.5 [57.1] 23.6 [59.9]

327 Series 327 Series 39 ri s 339 Series

5 HP 5 HP 8 8 HP

Optional Wheel Kit For Roll Frame Pumps

Ship Wt. (Lbs.)

HP Class ♦ SUC* DIS*

L**

W**

Model

Features

316 S ies

4/5 HP

2 20.0 [50.8]

17.5 [44.4]

17.6 [44.7]

Includes 10" semi-pneumatic tires on steel wheels with steel clamps and handles for universal mounting to frame.

C402-90 ( ♦ ) HP Class represents market category and is not intended to define actual horsepower (*) Standard NPT (Female) Pipe Thread (Discharge Elbow Not Shown). (**) This dimension may vary due to engine manufacturer’ specifi ations. NOTE: Dimensions are in inches (centimeters) and have a tolerance of ± 1/8".

HP Class ♦ SUC* DIS* HP Class ♦ SUC* DIS*

Model Model 316 Series 316 Series

L** L**

W** W**

H H

4/5 HP 4/5 HP

2 2

2 20.0 [50.8] 2 20.0 [50.8]

17.5 [44.4] 17.5 [44.4]

17.6 [44.7] 17.6 [44.7]

® ( ♦ ) HP Class represents market category and is not intended to define actual horsepower (*) Standard NPT (Female) Pipe Thread (Discharge Elbow Not Shown). (**) This dimension may vary due to engine manufacturer’s specifications. NOTE: Dimensions are in inches (centimeters) and have a tolerance of ± 1/8". ( ♦ ) HP Class represents market category and is not intended to define actual horsepower (*) Standard NPT (Female) Pipe Thread (Discharge Elbow Not Shown). (**) This dimension may vary due to engine manufacturer’s specifications. NOTE: Dimensions are in inches (centimeters) and have a tolerance of ± 1/8".

Manufacturer of AMT & IPT Pumps 400 Spring Street • Royersford, PA 19468 USA

A Gorman-Rupp Company

0414 1020

ENG-10

2˝ Self-Priming Engine Driven Trash Pumps • Cast Iron Construction • Viton ® /Silicon Carbide Mechanical Seal • 2˝ NPT Port Sizes • Self-Priming up to 20 Feet with Built-In Viton ® Check Valve • Engine Options: Honda, Gasoline or Hatz Diesel • Solids Handling and Dirty Water Design • Maximum Solids Handling up to 1˝ Diameter • Maximum Head up to 105 Ft. • Maximum Flow up to 185 GPM • Heavy Duty Steel Roll Frame Included with Optional Wheel Kit Available

Model 3932-95

Performance of Engine Driven Trash Pumps

Performance of 2" Engine-Driven Trash Pumps

[m] [ft.*]

140

AMT Cast Iron Engine Driven Trash pumps are designed for

A = 393 Series

120

applications which require high flow, solids handling capability and abrasion resistance. This series of pumps are also good for chemical spraying, handling and processing. These pumps are constructed of heavy duty CNC machined cast iron components featuring removable/replaceable cast iron volute and impeller. Simple four bolt clean out design permits easy removal of trash and debris without disconnecting hoses. Pumps are designed to handle liquids with solids content or dissolved solids and debris. Pumps are available with gasoline overhead valve or diesel engines from various engine manufacturers.

100

[U.S. gpm] [m 3 /h]

0 20 40 60 80 100 120 140 160 180 200 220

0 4 8 12 16 20 24 28 32 36 40 44 48 Capacity (*)Convert to psi, divide by 2.31 Liquid - Water specific gravity 1.0

3930-C00-W0_B&S_Engines_Removed.xlsx 5/22/2020

400 Spring Street • Royersford, PA 19468 USA www.amtpump.com • 888-amt-pump (268-7867) For use with nonflammable liquids compatible with pump component materials.

ENG-11

Viton ® and Teflon ® are registered trademarks of E. I. Dupont.

A Gorman-Rupp Company

® A Gorman-Rupp Company Engine Driven Self-Priming Trash Pumps

Pump Dimensional & Specification Data

2.0 2.7 Tank Size (Gal/Ltr.) Run Time (Hours) Tank Size (Gal/Ltr.)

Tank Size (Gal/Ltr.) Ship Wt. (Lbs.)

Ship Wt. (Lbs.)

Seal Run Time (Hours) Run Time (Hours) Run Time (Hours)

Tank Size (Gal/Ltr.)

Model Curve Port

Driver

Model Curve Port

Driver

Seal

Ship Wt. (Lbs.) Ship Wt. (Lbs.)

3932-95 3937-D5 A A

A A 2" NPT 2" NPT

2" NPT 2" NPT Honda GX160 ▲ Hatz Die el 1B30 Driver

0.82/3.1 105 1.32/5.0 140 80

Honda GX160 ▲ Hatz Diesel 1B30 Seal Seal

Viton ® / SIC Viton ® / SIC 1.2 2.0 2.7

3932-95 3937-D5

0.52/2.0 1.32/5.0 140 0.82/3.1 105

Viton ® / SIC Viton ® / SIC Viton ® / SIC Viton ® / SIC Vit ® / I Viton ® / SIC Viton ® / SIC Viton ® / SIC

Model

Curve Port

3163-95 Model Curve Port 2" NPT

Briggs & Stratton Driver Honda GX160 ▲ Hatz Diesel 1B30 B & S Vanguard ▲ Honda GX160 ▲ Hatz Diesel 1B30

A B B B

3930-95 3932-95 3937-D5 Construction: Cast Iron ▲ Oil Alert Included 3932-95

Construction: Cast Iron ▲ Oil Alert Included " N 2" NPT A A

Maximum Solids Handling Capacity: 1" Diameter 1.3 0.87/3.3 110 0.82/3.1 105

2.0 2.7

2" NPT 2" NPT 2" NPT

Maximum Solids Handling Capacity: 1" Di meter

0.82/3.1 105 1.32/5.0 140 1.32/5.0 140

2.0 2.7

3937-D5 Construction: Cast Iron ▲ Oil Alert Included Construction: Cast Iron ▲ Oil Alert Included

Maximum Solids Handling Capacity: 1" Diameter

HP Class SUC * DIS*

Model 3163-95

L**

W**

4 HP

2 20.0 [50.8]

17.5 [44.5]

17.6 [44.8]

393 Series 5 HP GAS 2

2 24.0 [61.0]

19.2 [48.7]

18.6 [47.2]

393 Series 5 HP DIESEL 2

2 31.0 [78.7]

22.5 [57.1]

23.6 [59.9] Model 393 Series

Optional Wheel Kit For Roll Frame Pumps

i Optional Wheel Kit For Roll Frame Pumps

Optional Wheel Kit For Roll Frame Pumps l W l Kit r oll Frame Pumps

Model HP Class ◆ SU * DIS* L** HP Class ◆ SUC* DIS HP Class ◆ SUC I

HP Class ◆ SUC* DIS* L** L** * W** W** *

W**

Model Model

Model

393 Series 5 HP Gas 2 2 24.0 [61.0] 19.2 [48.7] 18.6 [47.2] 393 Series 5 HP Diesel 2 2 31.0 [78.7] 22.5 [57.1] 23.6 [59.9] 20.0 [50.8] 17.5 [44.5] 17.6 [44.8] 2 24.0 [61.0] 19.2 [48.7] 18.6 [47.2] 31.0 [78.7] 22.5 [57.1] 23.6 [59.9] 5 HP 2 2 24.0 [61.0] 19.2 [48.7] 18.6 [47.2] 5 HP Gas ries 5 HP Diesel 2 3163-95 393 Series 393 Series

( ♦ ) HP Class represents market category and is not intended to define actual horsepower (*) Standard NPT (Female) pipe thread. (**) This dimension may vary due to engine manufacturer’s specifications. NOTE: Dimensions are in inches (centimeters) and have a tolerance of ± 1/8". (**) This dimension may vary due to engine manufacturer’s specifications. NOTE: Dimensions are in inches (centimeters) and have a tolerance of ± 1/8". (**) This dimension ay vary due to engine anufacturer’s specifications. N TE: Di ensions are in inches (centimeters) and have a tolerance of ± 1/8". 4 HP 2 5 HP Gas 2 2 24.0 [61.0] 19.2 [48.7] 18.6 [47.2] 393 Series 5 HP Diesel 2 2 31.0 [78.7] 22.5 [57.1] 23.6 [59.9] ( ♦ ) HP Class represents market category and is not intended to define actual horsepower (*) Standard NPT (Female) pipe thread. ( ♦ ) HP Class represents market category and is not intended to define actual horsepo er (*) Standard NPT (Female) pipe thread. ( ♦ ) HP Class represents market category and is not intended to define actual horsepower (*) Standard NPT (Female) pipe thread. (**) This dimension may vary due to engine manufacturer’s specifications. NOTE: Dimensions are in inches (c ntimeter ) and have a tolerance of ± 1/8". 393 Series

Features t r

Ship Wt. i t.

Model

Features

Ship Wt.

Model

Features

Ship Wt.

I l

C402-90 Includes 10" semi-pneumatic tires on steel wheels with steel clamps and handles for universal mounting to frame. l it t l clamps and handles for universal mounting to frame. Includes 10" semi-pneumatic tires on steel wheel with st l clamps and handles for universal mounting to frame. tir t l

Includes 10" semi-pneumatic tires on steel wheels with steel clamps and handles for universal mounting to frame. 25 25

C402-90 C402-90

Standard Features

• (2) NPT Pipe Nipples & 2" Street Elbow Included • Viton ® /Silicon Carbide Mechanical Seal • Viton ® O-ring and Casing Seal • Self-primes to 20 Feet with Built-in Viton ® Check Valve

• Stainless Steel Shaft Sleeve • Steel Suction Strainer Included • Cast Iron Replaceable Volute/Wearplate and Impeller • Maximum Temperature 180° F

• Maximum Working Pressure 75 PSI • Heavy Duty Steel Roll Frame Included • Honda Engines are Overhead Valve (OHV) Designs with Low Oil Alert • QSP – Quick Ship Pumps

Manufacturer of AMT & IPT Pumps 400 Spring Street • Royersford, PA 19468 USA

A Gorman-Rupp Company

1212 020

ENG-12

2˝ & 3˝ Self-Priming Engine Driven Trash Pumps • Cast Aluminum with Cast Iron Wearparts • Silicon Carbide/Viton ® Mechanical Seal • EPDM/EPR O-Rings Standard with Optional Viton ® • 2˝ or 3˝ Removable Male NPT Suction and Discharge Ports • Discharge Rotates in 90° Increments • Engine Options: Honda, LCT Storm Force Gasoline or Hatz Diesel Engines • Easy Clean Out with One Tool Serviceability • Maximum Solids Handling up to 1-1/4˝ • Solids Handling and Dirty Water Design

Model 2S5XHR

• Maximum Flow up to 290 GPM • Maximum Head up to 125 Ft. • Self-Priming to 26 Ft. • Wheel Kit Optional

Performance of Engine Driven Self-Priming Trash Pumps

[m] [ft.*]

140

Model 3S5XLR

A = 2S5X Series B = 3S5X Series

120

100

IPT Portable High Volume, Self-priming Centrifugal Trash pumps come standard with a cast iron impeller to resist abrasion and one tool serviceability for easy cleanout. Pumps are designed to handle liquids with solids content or dissolved solids and debris. All pumps feature aluminum housing, cast iron wearparts, built-in check valve, suction strainer and heavy duty steel roll frame. Heavy duty cast iron flanges with male NPT threads that rotates in 90° increments. Easy access fill plug on discharge port.

0 40 80 120 160 200 240 280 320 360 400 440 [U.S. gpm]

[m 3 /h]

0 10 20 30 40 50 60 70 80 90

Capacity (*)Convert to psi, divide by 2.31 Liquid - Water specific gravity 1.0

400 Spring Street • Royersford, PA 19468 USA www.amtpump.com • 888-amt-pump (268-7867) For use with nonflammable liquids compatible with pump component materials.

ENG-13

Viton ® and Teflon ® are registered trademarks of E. I. Dupont.

A Gorman-Rupp Company

Page 1 Page 2 Page 3 Page 4 Page 5 Page 6 Page 7 Page 8 Page 9 Page 10 Page 11 Page 12 Page 13 Page 14 Page 15 Page 16 Page 17 Page 18 Page 19 Page 20 Page 21 Page 22 Page 23 Page 24 Page 25 Page 26 Page 27 Page 28 Page 29 Page 30 Page 31 Page 32 Page 33 Page 34 Page 35 Page 36 Page 37 Page 38 Page 39 Page 40 Page 41 Page 42 Page 43 Page 44 Page 45 Page 46 Page 47 Page 48 Page 49 Page 50 Page 51 Page 52 Page 53 Page 54 Page 55 Page 56 Page 57 Page 58 Page 59 Page 60 Page 61 Page 62 Page 63 Page 64 Page 65 Page 66 Page 67 Page 68 Page 69 Page 70 Page 71 Page 72 Page 73 Page 74 Page 75 Page 76 Page 77 Page 78 Page 79 Page 80 Page 81 Page 82 Page 83 Page 84 Page 85 Page 86 Page 87 Page 88 Page 89 Page 90 Page 91 Page 92 Page 93 Page 94 Page 95 Page 96 Page 97 Page 98 Page 99 Page 100 Page 101 Page 102 Page 103 Page 104 Page 105 Page 106 Page 107 Page 108 Page 109 Page 110 Page 111 Page 112 Page 113 Page 114 Page 115 Page 116 Page 117 Page 118 Page 119 Page 120 Page 121 Page 122 Page 123 Page 124 Page 125 Page 126 Page 127 Page 128 Page 129 Page 130 Page 131 Page 132 Page 133 Page 134 Page 135 Page 136 Page 137 Page 138 Page 139 Page 140 Page 141 Page 142 Page 143 Page 144 Page 145 Page 146 Page 147 Page 148 Page 149 Page 150 Page 151 Page 152

amtpumps.com

Made with FlippingBook Learn more on our blog