® A Gorman-Rupp Company 1750 RPM Straight Centrifugal Pump
Pump Dimensional & Specification Data
Ship Wt. (Lbs.)
Voltage @ 60 Hz +
Full Load Amps
Model ‡ Curve HP PH Frame ENC
SUC* DIS* A**
B
C
D
E
F
G
J
L**
W**
H
430A-95
A 30 3 286JM TEFC 208-230/460 80/36
4 ◆ 6 ◆ 10.5 [26.8] 7.0 [17.8] 15.1 [38.6] 9.2 [23.5] 5.0 [12.7] 11.0 [27.9] 7.9 [20.2] 11.0 [27.9] 31.2 [79.4] 24.0 [60.9] 18.2 [46.2] 540
Maximum Solids Handling Capacity: 1/4" Diameter
(*) Standard NPT (Female) pipe thread. (**) This dimension may vary due to motor manufacturer's specifications. ◆ Standard 125# Flange (+) 3-Phase motors can also operate on 50 Hz. (This will change full load amps, service factor and RPM) NOTE: Dimensions are in inches (centimeters) and have a tolerance of ± 1/4". NOTE: Electric supply for ALL motors must be within ±10% of nameplate voltage rating (e.g. 230V ±10%= 207 to 253).
Standard Features
• Cast Iron Construction • Viton ® Silicon Carbide/Carbon Mechanical Seal • Silicon Bronze Precision Cast Dynamically Balanced Impeller • Bronze Case Wear Ring • 6 " x 4 " 125 Lb. 8-Bolt Flanged Suction Port & 4-Bolt Flanged Discharge Port • 1/4 " NPT Gauge Taps on Suction & Discharge Ports for System Monitoring
• Bronze Shaft Sleeve to Protect Motor Shaft • Maximum Casing Pressure 175 PSI • Maximum Temperature 200° F • Includes Seal Flush/Air Relief Valve • Front Drain Plugs • 1750 RPM TEFC JM NEMA Frame IE2/EPAC Energy Efficient Motors
Manufacturer of AMT & IPT Pumps 400 Spring Street • Royersford, PA 19468 USA
®
www.amtpump.com • 888-amt-pump (268-7867) The Gorman-Rupp Company reserves the right to discontinue any model or change specifications at any time without incurring any obligation. ©2012 American Machine and Tool Company. All rights reserved.
A Gorman-Rupp Company
1212 0220
STE-26
Made with FlippingBook Learn more on our blog