®
12 Volt DC Submersible Pump
A Gorman-Rupp Company
Pump Dimensional & Specification Data
Voltage @ 60 Hz+
Full Load AMPS
Seal Type & Elastomer
Motor Enclosure A Suction Strainer
Ship Wt. (LBS.)
Model
Description/Type of Pump
HP
DIS*
H
W
0.38/[09.] Dia. Holes Located On
Buna Carbon Ceramic
5891-DC
Electric Submersible Pump
1/3
12V DC
26
1.5
Aluminum
19.1 [48.5]
9.8 [22.3]
40
0.5/[1.2] Stag- gered Center
5890-90
Optional Carrying Case
14
(*) Standard NPT (Female) pipe thread. (**) This dimension may vary due to motor manufacturer’s speciifcations. NOTE: Dimensions are in inches (centimeters) and have a tolerance of ± 1/4”. NOTE: Electric supply for ALL motors must be within ± 10% of nameplate voltage rating (e.g 230V ± 10%=207 to 253) .
5891-DC
Standard Features
• Aluminum Construction with Cast Aluminum Impeller • 1/3 HP, 12 Volt DC 26 Amp Motor • 30 Ft. Insulated (PVC) Conductor Cable with Battery Clips • Built-in Carry Handle • On/Off Switch • Maximum Temperature 104° F
• 1-1/2" NPT (Female) Discharge • Steel Strainer Built into Pump • Buna-N Mechanical Seal with Carbon and Ceramic Faces • Overload Protected • Stock Availability on this Model • QSP – Quick Ship Pump
Manufacturer of AMT & IPT Pumps 400 Spring Street • Royersford, PA 19468 USA
®
www.amtpump.com • 888-amt-pump (268-7867) The Gorman-Rupp Company reserves the right to discontinue any model or change specifications at any time without incurring any obligation. ©2012 American Machine and Tool Company. All rights reserved.
A Gorman-Rupp Company
1212 921
SUB-8
Made with FlippingBook Learn more on our blog