® A Gorman-Rupp Company Self-Priming Sewage/Trash Pumps
Pump Dimensional & Specification Data
Ship Wt. (Lbs.)
SUC* HP Model
DIS* A**
B
C**
D
E
F
G
J**
K
L**
W**
H
20.3 [51.5] 19.9 [50.5] 27.4 [69.6] 24.9 [63.2] 30.5 [77.5] 29.0 [73.7] 34.3 [87.1] 33.4 [84.8] 33.4 [84.8] 3 6 5 3 2 7 3 1 7 5 6
316B-95 3 2 2
2.4 [6.1] 11.1 [28.2] 6.1 [15.4] 3.1 [7.8] 4.8 [12.2] 4.0 [10.1] 3.8 [9.6] 2.1 [5.3] 2.5 [6.3]
8.8 [22.3] 8.8 [22.3]
94 87
9.3 [23.6] 9.3 [23.6] 13.4 [34.0] 12.3 [31.2] 15.5 [39.4] 13.5 [34.3] 15.5 [39.4] 14.3 [36.3] 14.3 [36.3]
3 2 2 2.5 [6.3] 2.1 [5.3] 3.8 [9.6] 4.0 [10.1] 4.8 [12.2] 3.1 [7.8] 6.1 [15.4] 11.1 [28.2] 2.4 [6.1]
316A-95
393B-95 5 2 2 3.8 [9.6] 2.1 [5.3] 5.5 [13.9] 5.2 [13.2] 4.8 [12.2] 3.1 [7.8] 6.9 [17.5] 14.8 [27.6] 4.4 [11.1] 393A-95 5 2 2 3.8 [9.6] 2.1 [5.3] 5.5 [13.9] 5.2 [13.2] 4.8 [12.2] 3.1 [7.8] 6.9 [17.5] 14.8 [27.6] 4.4 [11.1] 394H-95 7.5 3 3 4.3 [10.9] 3.5 [8.9] 5.5 [14.0] 6.1 [15.5] 9.0 [22.9] 8.1 [20.6] 11.8 [30.0] 19.0 [48.3] 3.7 [9.4] 394G-95 7.5 3 3 3.8 [9.7] 3.5 [8.9] 5.5 [14.0] 6.1 [15.5] 9.0 [22.9] 8.1 [20.6] 11.8 [30.0] 18.3 [46.5] 3.7 [9.4] 394F-95 10 3 3 4.3 [10.9] 3.5 [8.8] 7.0 [17.7] 6.1 [15.4] 9.0 [22.8] 8.8 [22.3] 12.5 [31.7] 19.7 [50.0] 3.7 [9.4] 394E-95 10 3 3 4.3 [10.9] 3.5 [8.8] 7.0 [17.7] 6.1 [15.4] 9.0 [22.8] 8.8 [22.3] 12.5 [31.7] 19.7 [50.0] 3.7 [9.4] 399C-95 15 4 4 4.3 [10.9] 3.5 [8.8] 7.0 [17.7] 6.1 [15.4] 9.0 [22.8] 8.8 [22.3] 12.5 [31.7] 19.7 [50.0] 3.7 [9.4] 1 0 6 1 8 0 0 20 0 8 K 1 0 6 1 8 0 0 20 0 8 J 1 8 0 0 20 0 8 D 1 0 6
10.0 [25.4] 189 10.0 [25.4] 173 15.1 [38.4] 295 15.1 [38.4] 245 15.1 [38.3] 450 15.1 [38.3] 330 27 15.1 [38.3] 350 275 36
(*) Standard NPT (Female) pipe thread. (**) This dimension may vary due to motor manufacturer's specifications. NOTE:Dimensions are in inches (centimeters) and have a tolerance of ±1/4".
Voltage @ 60 Hz +
Full Load Amps
Max Solids
Model
Curve HP PH ENC Frame
1 3 1 3 1 3 1 3 1
230
16
316B-95 316A-95 393B-95 393A-95 394H-95 394G-95 394F-95 394E-95 394J- 399C-95 D 394H-95 K
A 3
1"
TEFC 56J
230/460
8/4
230
20
B 5
1"
TEFC
184JM
230/460 17/9
(+) 3-Phase models can also operate on 50 Hz (This will change full load amps and service factor, RPM and priming capabilities). NOTE: Electric supply for ALL motors must be within ±10% of nameplate voltage rating (e.g. 230V ±10%= 207 to 253). -Phase models can also operate on
215JM 230 215JM 230
31 31
C 7½
1½"
TEFC
184JM 230/460 22/11
230
40
1½" 1½"
D
10
TEFC 215JM TEFC 215JM
230/460 26/13 6 13
E 15 3 TEFC 215JM 230/460 47/24
2"
Optional Mounting Base Model A200-90
Standard Features
• Cast Iron Construction for Abrasive Resistance and Durability • Silicon Carbide/Viton ® Mechanical Seal • Built-in Buna-N Check Valve • Buna-N O-ring Casing Seal Reusable After Clean Out Maintenance • Self-Cleaning Stainless Steel Impeller Resists Clogging and Wear • Pull-from-Rear Design Permits Clean Out and Repair Without Removing Piping • 3" & 4" Models Feature Front Cleanout
• Replaceable Cast Iron Volute/Wearplate Designed for Solids Handling • Motor Includes Stainless Steel Shaft or Stainless Steel Shaft Sleeve • Available with 3 to 15 HP Totally Enclosed Fan Cooled (TEFC) Electric Motors • Single or Three Phase, 3450 RPM Motors • Optional Mounting Base Available for 184/215 JM Frames • Maximum Working Pressure 150 PSI • Seal Flush Port Provided on 5 HP and Larger • Optional Mounting Base Available • QSP – Quick Ship Pump for Many Models
Hazardous Duty/Xplosion Proof motors available from stock ranging from 1 to 10 HP; CALL FOR QUOTATION & LEAD TIME!
Manufacturer of AMT & IPT Pumps 400 Spring Street • Royersford, PA 19468 USA
®
www.amtpump.com • 888-amt-pump (268-7867) The Gorman-Rupp Company reserves the right to discontinue any model or change specifications at any time without incurring any obligation. ©2022 AMT Pump Company. All rights reserved.
A Gorman-Rupp Company
0913 122
SPE-18
Made with FlippingBook Learn more on our blog