Inline 3˝ Circulator Pumps
®
A Gorman-Rupp Company
Pump Dimensional & Specification Data
‡ Ship Wt. (Lbs.)
Voltage @ 60 Hz +
Full Load Amps
H
Model ‡ Curve HP PH ENC
A**
B
C
L**
W
5735 5736 5730 5731
1 3
115/230 230/460 115/230 230/460
7/4 2/1 9/5 3/2
78 75 84 77
A 1/3
TEFC
14.0 [35.5]
10.0 [25.4] 3.0 [7.6] 17.0 [43.2] 8.0 [20.3] 11.1 [28.2]
1/2 1
B
TEFC
14.0 [35.5]
10.0 [25.4] 3.0 [7.6] 17.0 [43.2] 8.0 [20.3] 11.1 [28.2]
3/4
3
‡ When ordering add the correct -9x suffix to model number indicating material selection
**This dimension may vary due to motor manufacturer's specifications (+) 3-Phase models can also operate on 50 Hz. (This will change full load amps, service factor and RPM.) NOTE: Dimensions are in inches (centimeters) and have a tolerance of ± 1/8" NOTE: Electric supply for ALL motors must be within ±10% of nameplate voltage rating (Ex. 230V ± 10%= 207 to 253)
XCI (-95) = Cast Iron Construction XB (-97) = Cast Bronze Construction
PUMPS ARE DESIGNED TO MOUNT HORIZONTALLY OR VERTICALLY
Flange to Bell & Gossett Bell & Gossett Armstrong TACO Dayton Model Series Flange Width Series (C.Iron) Series (Bronze) Series Series (C.Iron) 5735/5736 10 LD3 LD3AB S-45 122 4RC99 5730/5731 10 HD3 HD3AB S-46 131 4RD12 Manufacturer Cross Reference
Standard Features
• Mounting Flange Kit for 3" NPT, Which Includes (2) Flanges, (2) Gaskets, and Fasteners • 4-Bolt Flange Allows 360° Mounting Rotation in 90° Increments • 1/8" NPT Seal Wash/Vent Port • EPDM/EPR Mechanical Seal and O-Rings • Optional Buna-N Mechanical Seal and O-Ring Available
• Stainless Steel (300 Series) Stub Shaft • High Efficiency Closed Impeller
• Standard NEMA 56C Motor Mounting Dimensions • Available in either Single Phase or Three Phase TEFC 56C Motors • Maximum Working Pressure 150 PSI • QSP: Quick Ship Pump for Many Models
Manufacturer of AMT & IPT Pumps 400 Spring Street • Royersford, PA 19468 USA
®
www.amtpump.com • 888-amt-pump (268-7867) The Gorman-Rupp Company reserves the right to discontinue any model or change specifications at any time without incurring any obligation. ©2012 American Machine and Tool Company. All rights reserved.
A Gorman-Rupp Company
0616 220
HVM-12
Made with FlippingBook Learn more on our blog