ENGLISH
10.3.1 Calibration of the batteries If the CANNS500 (battery monitor) has been connected to the sys- tem, the basic battery parameters can be entered in this menu.
N ote Avoid all contact with solvents (acetone, mineral turpentine etc.) or cleaning agents that contain ammonia, as these can damage the anti-reflective layer. 11.2 Debugging report In the case of firmware-related problems, it is possible to send VETUS a debugging report. To do this, connect your device to a network, enter the password 44441, select Log management and press the Upload logs button.
10.4 Compatible sensors
Each NMEA2000-certified transducer (sensor) can be connected to the local NMEA2000 network.
10.5 Password
@ Quick Access >
> Network > Password
12 Specifications
W arning This menu is only intended for experts!
Casing
Aluminium -25° to +60°C
Operating temperature
A password is used to unlock menus which have not been designed for everyday use and are only intended for experts.
IP value
IPx6
Weight (excluding mounting material) Screen brightness Screen resolution
0,6 kg
02929 - Select your update channel.
1200 nits 800 x 480
44441 - System menu. Use the system menu for example to activate demo mode, change parameters, upload debug reports and test hardware functions.
Viewing angle
L/R: 70°, above: 50°, below: 70°
Operating voltage
12 - 28 VDC
Power consumption at 12V (maximum background lighting)
30000 - Dialogue window activation code Use this to activate a func- tion for which an activation code has been received.
0,55 A
Standby mode for low energy level
yes
00666 - System reset. Select the options you want to reset to the standard settings.
Protection Processor
reversed polarity
Quad-core ARM Cortex-A7 CPU M12 NMEA2000 connector
11 Maintenance
NMEA 2000 (compliant)
Card reader
1 x Micro SD
The device does not contain any parts that can be repaired by the user. The maintenance to be carried out is minimal.
USB
yes
N ote To prevent UV damage, always fit the protective cover provi- ded when the device is not in use.
11.1 Cleaning the display
• Turn off the screen. • Switch off the system power. • Rinse the screen with plenty of clean fresh water to remove dirt and salt residues. • Use a cleaning cloth to clean the screen. Exert minimal pressure on the screen. When specks on the screen cannot be removed using the cloth alone, use a 50/50 mixture of warm water and isopropyl alcohol to clean the screen.
30 371001.01
Installation and user manual CANNME7 Multifunctional, multi touch display
Made with FlippingBook - professional solution for displaying marketing and sales documents online