Using Auto Finish on Edge Logic for Measuring Circles and Arcs To use the Auto Finish on Edge Logic function to measure circles and arcs (a circle is shown in this example): 1 Define the start point. Cross the circle or arc edge at the start point twice in opposite directions to start the measurement. The Measure Prompt screen will display “Measure anything”. 2 Probe a point on the circle or arc edge at a location that will fall in the approximate middle between the start and stop points.
Crosshair sweeps from outside to inside
Crosshair sweeps from inside to outside
Crosshair sweeps from outside to inside
3 Define the stop point. Cross the circle or arc edge at the stop point twice in opposite directions. The system will then move the stage to probe additional points until the total number of points equals the number specified earlier for the circle or arc in the Circle Auto Finish settings field or Circle Auto Finish settings field. The measurement will be completed and the circle or arc feature will be shown in the Feature List and in the Feature Detail screen.
Crosshair sweeps from outside to inside
Crosshair sweeps from inside to outside 1
All points probed
40
Made with FlippingBook - professional solution for displaying marketing and sales documents online