NOTE If you wish to apply the same decimal place information to all new M2 measurement sessions, confirm that the Tolerance Places Data on New Part is set to Keep in the Measure settings screen. System toolbar > System menu > Measure settings screen > Tolerance Places Data on New > Keep
2 Navigate to the Nominal Feature Detail screen as described earlier. 3 Press the Place Table button to display the Place Table. Measure toolbar > Place Table button
Press the Place Table button
Place table values
4 Modify the values of the place table to represent the values found in the detail block of your engineering drawing if required, then press the Done button to return to the Feature Detail screen. Measure toolbar > Done button 5 Navigate back to the Nominal Feature Detail screen if necessary, and enter the nominal values using one of the methods described earlier. Press the non-significant digits in each field to apply the Place Table values. Non-significant digits will become gray to indicate that the values have been applied. Press the Done button to conclude this process. Measure toolbar > Done button
Press non-significant digits
66
Made with FlippingBook - professional solution for displaying marketing and sales documents online