Contents by Products
H Milling Cutters / Modular Tools
■ Milling Cutter Selection Guide ■ Grades for Milling ■ Cutter Identification Table ■ Insert Catalog No. Nominal ■ Face Milling
■ Non-ferrous Metal Milling ■ Milling of Exotic Alloys ■ Milling of CFRP ■ Cemented Carbide and Hard Brittle Material Binderless PCD Endmills ■ CBN Endmills for Hardened Steel ■ PCD Endmills for Non-Ferrous Metals ■ R/3D Profiling ■ Groove / T-Slot ■ Chamfering ■ Non-ferrous Metal Milling ■ High-speed Cast Iron Milling ■ Modular Tools ■ Special Purpose Cutters ● Goalmill Series ■ Discontinued Milling Cutters Diameter Drilling ■ For Non-ferrous Metal Milling ■ For Drilling of Heat-Resistant Alloys ■ For Milling of CFRP ■ For Drilling of Thin Sheets ■ Indexable Insert/Head Type ■ Reamers ■ HSS
■ Shoulder Milling ■ High Feed Milling ■ Multi-purpose (WMM) ■ Radius Milling
H1 to H262
A
■ Selection Guide ■ Cutting Edge Length List by Diameter ■ Endmill Coating Grades ■ Square / Radius Endmills (Coated) ■ Ballnose Endmills (Coated) ■ AURORA Coat Endmills ■ SUMIDIA Coated Endmills
I
B
Endmills
I1 to I122
C
■ Drill Selection Guide ■ Application Range of Major Drills ■ Drill Coating
J
■ General-purpose ■ For Spot Facing ■ For Deep Hole Drilling
D
Drills Reamers
■ CBN - SUMIBORON Series ■ Coated CBN - SUMIBORON Series ■ Guidance for CBN - SUMIBORON Grades ● Hardened Steel Cutting ● Cast Iron Cutting ● Sintered Component Machining ● Machining of Rolls / Hard Facing Alloys / Heat-Resistant Alloys ● Titanium Alloy Cutting ● Plate Blanks ● Rod Blanks ● Special Rod Blanks ■ JIS Type Inserts for Carbide Tool Holders ■ JIS Type Carbide Tool Holders ■ Carbide Material Features and Applications ■ For Extra Small Hole Drilling ■ For Deep Drilling/Pocketing ■ For Medium to Large
J1 to J164
E
K Carbide Materials
■ Jig Boring Tools IJB Type
F
K1 to K12
G
■ Inserts ● CBN - SUMIBORON Insert Series ● Stock Table for CBN - SUMIBORON Indexable Inserts ■ Holders ● CBN - SUMIBORON Toolholder Series ■ Cutters / Endmills ● CBN - SUMIBORON Mill Series ● CBN - SUMIBORON Endmill Series
L
H
CBN - SUMIBORON
I
L1 to L132
■ PCD - SUMIDIA Series ■ Binderless PCD Series ■ Inserts
■ Cutters / Endmills
M
● SUMIDIA - PCD Cutter Series ● SUMIDIA - PCD Endmills
J
■ Drills
● PCD Insert Identification Table ● Stock Table for PCD Indexable Inserts ● Stock Table for Binderless PCD Indexable Inserts ■ Holders ● SUMIDIA Tool Holder Series
● SUMIDIA - PCD Drills
PCD - SUMIDIA / Binderless PCD / SUMICRYSTAL
■ SUMICRYSTAL
K
M1 to M35
Spare Parts / Technical Guidance / References N
■ Spare Parts ● Screws, Eccentric Pins, and Lever Pins ● Shims, Clamps, Rings and Pins ● Drawing Pins, Nuts, and Wrenches
■ References
● SI Unit Conversion List ● Metals Symbols Chart (Excerpt) ● Steel and Non-Ferrous Metal Symbols Chart (Excerpt) ● Hardness Scale Comparison Chart
L
■ Technical Guidance ● Turning Edition ● Milling Edition ● Endmilling Edition
● Standard of Tapers ● Fitting Tolerances ● Surface Roughness
M
N1 to N78
● Drilling Edition ● CBN Edition
■ A.L.M.T. Diamond Cutting Tools ● Ultra-Precision Cutting Tool UPC Series ● New D Tool Series ● PCD Reamer Rotating Tools
Index O
Z
N
A.L.M.T. Diamond Cutting Tools
O
Index
O1 to O6
Z1 to Z5
AL1 to AL13
A.L.M.T.
Made with FlippingBook flipbook maker