Sumitomo’s Coating Series combines a proprietary tough cemented carbide substrate with a multi-layered coating for use in high-speed, high-efficiency applications on a wide range of workpiece materials including steel, cast iron and exotic alloys. Coated Carbide
Features
®
: New coating technology that realizes absolute stability
CVD
PVD
A
Special Surface Treatment: Chipping resistance and adhesion resistance are signicantly improved by special surface treatments applied to suit the application High Strength Alumina Layer: Signicantly improves the coating strength by controlling crystal growth direction High Hardness Micro-Grain TiCN Layer: Signicantly improves the coating hardness by using a ne and uniform crystal structure High Adhesion Technology: Signicantly improves adhesion strength through a smooth interface between the coating and carbide substrate
Our proprietary super multi-layered coating structure: Advanced nanotechnology enables nanometre-level thickness (1 nanometre is one billionth of a metre) Hardness, thermal resistance and toughness are signicantly improved by alternately layering one thousand layers of super thin lms
10nm
Cross Section of Cutting Edge Coating TEM Structure
High Adhesion Technology: Signicantly improves adhesion strength through advanced control technology at the interface of the coating and carbide substrate
● Suppresses abnormal damage such as chipping and adhesion. Stable machining is achieved in various situations. ● Next-level high strength and high hardness coating is achieved. Achieves long, stable tool life even in high-efciency machining. ■ Applicable Grades: (For Steel Turning) AC8015P, AC8025P, AC8035P (For Stainless Steel Turning) AC6020M, AC6030M (For Cast Iron Turning) AC4010K, AC4015K (For Milling) ACP2000, ACK2000
● Optimised coating composition according to application. Achieves stable machining regardless of the work material. ● Signicantly improves chipping resistance by improving coating adhesion strength.
Stable machining is realised even under high load conditions. ■ Applicable Grades: (For Stainless Steel Turning) AC6040M (For Exotic Alloy Turning)
AC5015S, AC5025S
(For Small Lathes)
AC1030U
(For Milling)
ACU2500, ACP3000, ACK3000
®
PVD
Brilliant Coat
Brilliant Coat provides excellent lubricity for higher quality machining
Workpiece Material: STKM13A Insert: CNMG432ELU Cutting Conditions: v c =330 SFM f =0.006 IPR a p =.040", Wet
Brilliant Coat
Conventional coating
● PVD coating with excellent wear resistance and lubricity ● Suppresses reactions with work material and realises beautiful machined surfaces
■ Applicable Grade: (For Steel Turning) T1500Z
PVD
AURORA Coat (DLC: D iamond L ike C arbon)
Using our proprietary PVD process technology, we have developed a hydrogen-free DLC coating that is extremely hard, at and smooth.
● Comparison of Cutting Edge Adhesion after Cutting ADC12
Adhesion of Aluminum
Workpiece Material: ADC12 Cutting Conditions: v c = 1,000 SFM f z = 0.006 IPT a p = .200" a e = .200", Dry
AURORA Coat
Uncoated Carbide
● Second only to diamond in terms of hardness, this at and smooth coating has a low coefcient of friction and provides excellent adhesion resistance to deliver better machined surface quality ● Can be used for high-speed, high-efciency cutting of aluminum alloys, copper alloys, resins and more
■ Applicable Grades:
(For Milling) DL1000, DL2000 (For Endmilling) DL1000, DL1200 (For Drilling) DL1300, DL1500
A26
Made with FlippingBook flipbook maker