WaveMill WSE Series
D Ideal for machining titanium alloys for aerospace Designed for machining at large ramping angles, coupled with a selection of corner radii, makes it applicable for a variety of applications including titanium structural parts D Stable and long tool life in machining titanium alloys The optimized cutting edge shape together with newly developed ACS2500/ACS3000 grades (for machining exotic alloys) result in excellent wear resistance and fracture resistance D Optimized cutting edge shape and chip pocket for excellent chip evacuation ¢ Features
H
¢ Product Range
Dia. ( mm ) ø32 ø50 ø63
Type
Description
Cat. No.
5
6
Standard WSE 16000RS SS
Shell
5
6
WSE 16000RS SS L
Long
3
Standard WSE 16000E SS
Shank
Number in DD shows the number of teeth
¢ Applicable to various applications! Pocket Expansion Helical Milling
Slot Milling
Shoulder Milling
Ramping
¢ Ramping/Helical Milling Upper Limit Ramping
Helical Milling
Pitch
Pitch
RMPX
ap
DC
DC Machining diameter
DC Machining diameter
Dia. DC ø (in)
Dia. DC ø (in)
Max. Ramping Angle RMPX(°)
Max. Machining Dia. ø (in)
Standard Diameter ø (in)
Min. Machining Dia. ø (in)
Corner Radius RE
Corner Radius RE
Max. Pitch (in/rev)
Max. Pitch (in/rev)
Max. Pitch (in/rev)
RE ≥ 5.0 RE ≤ 4.0 RE ≥ 5.0 RE ≤ 4.0 RE ≥ 5.0 RE ≤ 4.0
8.4
4.0 0.8 4.0 0.8 4.0 0.8
2.18 2.41 3.61 3.83 4.63 4.85
0.51 0.51 0.44 0.51 0.40 0.46
2.17 2.22 3.61 3.63 4.63 4.65
0.51 0.51 0.44 0.43 0.40 0.39
1.81 1.81 3.22 3.22 4.25 4.25
0.12 0.11 0.11 0.11 0.11 0.10
1.26
1.26
12.2
3.6 5.6 2.5 3.9
1.97
1.97
2.48
2.48
Precautions for Helical Milling
Helical Milling
· For helical milling, if the work diameter is smaller than the standard diameter, there will be a center uncut portion. · A prepared center hole should be made. · Above the standard diameter, this portion can be removed by traverse cutting with the same cutter.
H98
Made with FlippingBook flipbook maker