Sumi Dual Mill DFC Series ■ Insert Grade
Lineup of Steel Milling Grades ACP100/ACP200/ACP300, Stainless Steel Milling Grades ACM200/ACM300, Cast Iron Milling Grades ACK200/ACK300 and more for a wide range of materials.
H
Work Material Grade Finishing to Light Cutting Medium Cutting Rough to Heavy Cutting
ACU2500
C
ACP100
ACP200
Steel
P
- Compared to conventional tools, the coating hardness has been increased by 40% and the oxidation starting temperature has been increased by 200°C - Enables more than 1.5 times the machining speed and ef ciency of conventional tools - Achieves more than double the tool life of conventional tools - Achieves excellent chipping resistance with smooth coating and our coating stress control technology - High-speed, high-ef ciency machining at a level more than 1.5 times higher than conventional tools is possible with a high hardness coating layer - Achieves more than double the tool life of conventional tools
New Super ZX Coat
ACP300
P
Super ZX Coat
Laminating Cycle UpTo10nm
ZX Coat
ACU2500
C
ACM200
Stainless Steel
ACM300
10nm
Work Material
Finishing to Light Cutting Medium Cutting Rough to Heavy Cutting Grade
P
Oxidisation Starting Temperature (°C) Film Cross-Section (TEM Image)
ACU2500
C
ACK200
Cast Iron
Coating Hardness: 30% Increase Surface Roughness: 50% Reduction
Super FF Coat
ACK300
Alumina
P
ACU2500
TiCN
Conventional coating
C
ACM200
Exotic Alloy
Substrate
ACM300
Cross-section of Coating
TiCN Surface Roughness Ra (μm)
P
The letters "C" and "P" at the end of each grade indicate the coating type. C
P : CVD, : PVD, Blank: Uncoated
L
G
GS
H
Chipbreaker
20°
20°
20°
Cutting Edge Cross Section
30°
.016, .032
.016, .032, .472, .063
.016, .032, .472, .063
.032, .472, .063
Nose Radius (in. / mm )
0.4, 0.8
0.4, 0.8, 1.2, 1.6
0.4, 0.8, 1.2, 1.6
0.8, 1.2, 1.6
Heavy Cutting, Heavy Cross-Section Machining and Hardened Steel Milling
Light Cutting, Low Rigidity Milling, Reduction of Burrs
Face Milling General-purpose to Interrupted Milling
Features and Applications
Shoulder Milling
H117
Made with FlippingBook flipbook maker