Radius Endmills for Exotic Alloys, Anti-vibration Type SSEHVL 4000W-R Type
Recommended Cutting Conditions 1. For stable machining, a high-rigidity machine is recommended. 2. Wet machining is recommended for stainless steel and heat-resistant alloy applications. 3. If cutting noise and vibration are present, please change the cutting conditions accordingly.
a e
DC
Side Milling
Work Material Cutting Conditions
Stainless Steel SUS304,SUS316
Titanium Alloy Heat-Resistant Alloy
I
Feed Rate (mm/min)
Feed Rate (mm/min)
Feed Rate (mm/min)
Spindle Speed (min -1 )
Spindle Speed (min -1 )
Spindle Speed (min -1 )
DC (mm)
5,100 4,600 3,800 2,900 2,300 1,900 1,400 1,100
5,300 4,800 4,000 3,000 2,400 2,000 1,500 1,200
2,500 2,200 1,800 1,400 1,100
4.5 5.0 6.0 8.0
480 520 560 520 500 470 430 330
600 700 800 780 640 600 500 260
200 220 210 200 180
10.0 12.0 16.0 20.0 25.0
930 160 700 140 560 110 450 90
890 270
950 290
a p a e
1.5DC 0.1DC
1.5DC 0.05DC
1.5DC 0.05DC
Standard Depth of Cut
Groove Milling
Work Material Cutting Conditions
Stainless Steel SUS304,SUS316
Titanium Alloy Heat-Resistant Alloy
Feed Rate (mm/min)
Feed Rate (mm/min)
Feed Rate (mm/min)
Spindle Speed (min -1 )
Spindle Speed (min -1 )
Spindle Speed (min -1 )
DC (mm)
4,200 3,800 3,200 2,400 1,900 1,600 1,200
3,900 3,500 2,900 2,200 1,700 1,400 1,100
1,400 1,300 1,100
4.5 5.0 6.0 8.0
200 240 260 240 220 200 130
270 300 300 270 250 230 200
100 120 140
800 120 650 110 550 100 400 80 320 60 250 50
10.0 12.0 16.0 20.0 25.0
950 760
95 75
890 700
90 70
Standard Depth of Cut
a p
0.3DC
0.2DC
0.15DC
I 97
Made with FlippingBook flipbook maker