Deep Hole Drilling XHGS / PHT
■ General Features Super MultiDrill XHGS, a next-generation drill specialized for deep hole drilling, features high drill strength and stable chip control to further enhance efficiency of deep hole drilling.
J
■ Features
● Deep hole drilling ● New groove shape (J flute) achieves improved chip control during deep hole drilling ● High-efficiency drilling at over v f =39.37 IPM at depths 20 times the drill diameter (diameter ø5, equivalent to S48C) ● Special web thinning shape (RX thinning) reduces cutting force during high-efficiency machining ● Long tool life ● Special DEX Coat provides long tool life on a wide variety of work materials ● Improved chip evacuation makes it possible to reduce spindle load fluctuation, ensuring long, stable tool life ● Eco-Friendly Chip control + evacuation drastically improved
● Compatible with the MQL (Minimum Quantity Lubrication) system ● Compatible with dual-fluid mist (simultaneous spray of oil and water)
■ Product Range
Diameter Range ( mm )
Applications
Cat. No.
Hole Depth (L/D)
MDW □□□□ XHGS10
ø2.1 to 16.0
up to 10
MDW □□□□ XHGS12
ø2.5 to 16.0
up to 12
MDW □□□□ XHGS15
ø2.1 to 16.0
up to 15
Deep Hole Drilling
RX thinning
MDW □□□□ XHGS20
ø2.1 to 14.0
up to 20
MDW □□□□ XHGS25
ø2.1 to 12.0
up to 25
MDW □□□□ XHGS30
ø2.1 to 10.0
up to 30
MDW □□□□ PHT
For Guide Holes
ø2.1 to 16.0
up to 2
■ Application Examples
● Automotive components (Medium Carbon Steel) Tool
● Automotive components (Structural Carbon Steel) Tool
: ø5.0x115mm (PHT), ø5.0x170mm (XHGS Type)
: ø6.0x170mm (PHT), ø6.0x230mm (XHGS Type)
Machine Coolant
: Horizontal single-spindle NC machine
Machine Coolant
: Horizontal single-spindle NC machine
: MQL (air pressure 0.5MPa, volume approx. 4cc/h) Cutting Conditions : v c =262 SFM, f =0.011 IPR, H =3.346" per hole (3 holes per unit) Tool life : 500 units (371 ft.)
: MQL (air pressure 0.5MPa, volume approx. 40cc/h) Cutting Conditions : v c =262 SFM, f =0.007 IPR, H =4.33" per hole (4 holes per unit) Tool life : 150 units (371 ft.)
● Automotive components (Ductile Cast Iron) Tool
● Machine components (1045 Steel) Tool
: ø5.0x105mm (PHT), ø5.0x155mm (XHGS Type)
: ø6.0x90mm (PHT), ø6.0x145mm (XHGS Type)
Machine Coolant
: Horizontal single-spindle NC machine
Machine Coolant
: Horizontal single-spindle NC machine
: MQL (air pressure 0.4MPa, volume approx. 4cc/h) Cutting Conditions : v c =165 SFM, f =0.007 IPR H =2.362" per hole (5 holes per unit) Tool life : 400 units (394 ft.)
: MQL (air pressure 0.5MPa, volume approx. 60cc/h) Cutting Conditions : v c =262 SFM, f =0.0078, H =2.44" per hole (3 holes per unit) Tool life : 550 units (341 ft.)
J71
Made with FlippingBook flipbook maker