Indexable Insert Drills Eccentric Sleeve for WDX
Indexable
DCB
Fig 1
L3 LS
L4
L2
Body (WAS)
Parts
J
Dimensions ( mm )
Screw
Wrench
Shank Dia. DCB
Shank Dia. DCON
Diameter BDX
Shank LS
Length L2
Length L3
Length L4
Diameter Adjustment Range
Cat. No.
Fig
WAS2025-48 WAS2532-60 WAS3240-70 WAS4050-85
BT0306 BT0406 BT0408 BT0408
LH015 LH020 LH020 LH020
+0.3 to -0.2 +0.3 to -0.3 +0.3 to -0.3 +0.3 to -0.3
1 1 1 1
20 25 32 40
25 32 40 50
33 43 5 32 5 42 60 7 46 6 55 70 7 57 6 60 70 7 54 6
Diameter Adjustment Range indicates the range in which the diameter can be adjusted. The dedicated Eccentric Sleeve WAS Type for the SumiDrill WDX Type provides ±0.3 mm of adjustment when drilling holes.
: Worldwide Warehouse Item
Cautions for Use
1. The dial is for reference purposes. Always measure the actual work diameter and adjust accordingly. 2. Not usable with collet chuck type holders. Use a side-locking type holder. 3. Use this product under high rigidity conditions. This product is not recommended for deep hole drilling such as 5D and low rigidity conditions.
Directions (Adjusting the Work Diameter)
Step 1.
Reference Line
WAS Type when Mounted
Adjust the dial on the sleeve to the reference line on the ange of the drill.
Step 3.
Step 2.
＋
Drill set screw
Adjustment hash marks
－
Lightly tighten the drill set screw to keep the drill from moving.
Turn the sleeve to a positive number to expand the work diameter, and to a negative number to decrease it.
J139
Made with FlippingBook flipbook maker