FIRE PROTECTION END SUCTION PUMPS
The protection of life is not a matter for compromise. This is particularly true for fire protection systems that are only as strong as their weakest link. Compromise may result in avoidable loss of life or property. This is why SPP fire pumps are designed specifically for the particular needs of fire protection and are approved by the majority of the major fire protection distributors worldwide. You can rest assured knowing you selected an approved SPP fire pump as part of an approved system, maintained in accordance with standards such as NFPA 20. Having manufactured fire pumps for over 135 years, SPP has gained experience from extreme environments, such as off- shore oil & gas installations, that has led to the creation of the SPP FM/UL approved Unistream range. These pumps are fully compliant to NFPA 20. SPP End-Suction fire pumps are available for duties ranging from 200 gpm to 1500 gpm and are suitable for electric or diesel drives.
TYPICAL INSTALLATIONS: • Supermarkets • Hospitals • Schools and Colleges • Hotels • Office Buildings TYPICAL APPLICATIONS:
• Sprinkler systems • Hydrant systems • Monitor systems • Water curtains
FIRE - END SUCTION PUMPS
SPP Pumps, Inc.
2905 Pacific Drive Norcross, GA 30071 Tel: +1 (770)-409-3280 www.spppumps.com
FIRE PROTECTION - END SUCTION PUMPS
Cast iron pump casing with centerline discharge, hydraulically engineered to yield best in class efficiency, does not retain air, eliminates need of separate air venting accessories as there are no air pockets within pump casing
Double shrouded impeller is provided with vanes on back shroud to balance axial thrust, larger impeller use dual wear ring with balance holes
Back pull out design allows removal of rotating assembly and bearing housing without disturbing suction and discharge piping
Impellers are specifically designed to meet NFPA 20, UL:448, FM:1319 fire pump requirementes
Design conforms to DIN:24255, ISO:2858 and ISO 5199, which is modular and interchangeable parts, fewer spares needed
Sturdy, yet simple, bearing is designed to withstand bi axial loads without having to use expensive angular contact bearings
Flanges drilled per ANSI B 16.1, optional drillings available per request
FEATURES • Horizontal DIN 24255 electric motor • 41 models • Wide choice of materials • Centreline discharge • Back pull-out rotating element can be removed without disturbing pipe work • Impellers cut to duty • High interchangeability – just three shaft modules cover the entire range
CONFIGURATION Horizontal electric motor or diesel engine driven
• Suitable for baseplate mounting with coupling • Approved to LPCB, FM and/or UL standards • In compliance with NFPA 20
DISCHARGE & PERFORMANCE  • 2 in. to 6 in. • Outputs up to 22 5 0 gpm • Heads up to 345 ft.
FIRE - END SUCTION PUMPS
Page 1 Page 2Made with FlippingBook - Online catalogs