Operations training
Crane and Hoist / V2 02052025
relatively simple examples and progressing to more specialised handling operations as appropriate. For example:
a. employees should be able to identify loads that may cause injury when handled. Increases in size often indicate an increase in weight and difficulty of handling
b. where the size of the item is less important than how full it is, e.g. in the case of a dustbin containing refuse, they should assess the load by looking inside it or use techniques such as rocking the load from side to side before attempting to lift it
c. they should also treat unfamiliar loads with caution. Drums which appear to be empty or other closed containers should be tested, e.g. by trying to raise one end
d. they should apply force gradually when testing loads. If employees feel too much strain, they should be encouraged to look for another way of handling the load safely
The following list illustrates some important points which are relevant to a basic two-handed symmetrical lift – a lift using both hands that takes place in front of and close to the body, without any twisting.
Basic lifting operations
Rocking a load to assess its ease of handling.
Figure Annex 9.3 – Basic lifting operations
Global Wind Organisation ©2025 / www.globalwindsafety.org
108 / 111
Made with FlippingBook interactive PDF creator