Operations training
Crane and Hoist / V2 02052025
Contact time includes delivery of course lesson content, practical exercises and activities directly related to these.
Note
The total training day includes contact time, meals and breaks and travel between training sites (where applicable)
8.4 Crane and Hoist Inspection and Maintenance Module Participant Ratio
The ratio shown for theory sessions indicates the maximum number of participants per instructor attending the course.
Practical ratios indicate the maximum number of participants to be supervised by an instructor during each activity.
Module
Session
Instructor to Participant Ratio
Theory
1:12
Crane and Hoist Inspection and Maintenance
Practical
1:6
Table 8.4.1 - GWO CHIM module instructor to participants ratio
When participants are split in more than one learning activity or location for practical crane and hoist training, the ratio shall be 1 instructor per location – depending on didactical design of activities and the local training risk assessment
Note
8.5 Participant Prerequisites
GWO Crane and Hoist Basic User Module training (or similar brand specific crane and hoist user training) is a prerequisite to participate in the Crane and Hoist Inspection and Maintenance Module training.
GWO Basic Technical Training Standard (BTT- Electrical, Mechanical, and Hydraulic Modules) or similar technical experience as well as service and maintenance experience is recommended to be able to get full benefit from the training.
8.6 Instructor’s Qualification Prerequisites
Instructor qualifications as given in GWOs Requirements for Training.
A competent instructor must hold the sufficient crane and hoist technical experience on multiple crane and hoist types obtained by (for example) work experience, crane and hoist trainings, and crane and hoist manufacturers trainings
Note
Global Wind Organisation ©2025 / www.globalwindsafety.org
46 / 111
Made with FlippingBook interactive PDF creator