Operations training
Crane and Hoist / V2 02052025
8.7 Equipment for Crane and Hoist Inspection and Maintenance Training (CHIM)
The equipment required for training is listed in Annex 1. This must be available and must fulfil national legal requirements (as applicable) listed in table 1.15.1 in Annex 1
8.8 Crane and Hoist Inspection and Maintenance Module Timetable The order in which elements of this module are delivered may vary according to the didactical choices of the delivering training provider. The instructor is encouraged to apply relevant theory during the practical elements where feasible.
The delivery of this module must comply with the requirements described in the GWO Requirements for Training.
Lesson
Element
Duration
1. Introduction to the training
1.1
Safety instructions and emergency procedures
1.2
Facilities
1.3
Introduction
1.4
Scope and main learning objectives
Ongoing assessment (participant assessment form)
1.5
1.6
Motivation
1.7
Human factors
1.8
Personal protection equipment (PPE) TOTAL
30 min.
2. Rules and legislation
TOTAL
30 min.
3. Documentation
TOTAL
60 min.
4. Inspection and maintenance (introduction)
4.1
Main components of cranes
4.2
Crane maintenance tasks
4.3
Main components of rails and trollies
4.4
Rail and trolley maintenance tasks
4.5
Main components of hoists
4.6
Hoist maintenance tasks TOTAL
90 min.
5. Safety systems
TOTAL
45 min.
Global Wind Organisation ©2025 / www.globalwindsafety.org
47 / 111
Made with FlippingBook interactive PDF creator