Operations training
Crane and Hoist / V2 02052025
The instructor shall:
Ask questions on the participants’ knowledge and experiences with relevant PPE equipment including: helmet, safety shoes, safety glasses, gloves, high visibility clothing (harness and fall-arrest may be presented) Present chemical, hydraulic, mechanical and electrical hazards related to inspection and maintenance of cranes and hoists and demonstrate related PPE, e.g. nitrile gloves, cut-resistance gloves, and safety glasses
The participants shall:
Engage in instructor’s questions and share their experiences on the use of PPE
This element may be conducted in relation to the practical exercises
Note
General PPE is expected knowledge, and the learning activity should draw on the participants’ experiences and focus on chemical, hydraulic, mechanical and electrical hazards related to maintenance of cranes and hoist
Note
RULES AND LEGISLATION
30 min
The aim of this lesson is to build on the participants knowledge and experiences on rules and legislation and to enable the participants to be aware of the need to comply to company rules and local legislation when operating, inspecting, and maintaining cranes and hoists.
The following types of inspections are covered in this module:
a. statutory inspection (must be performed as per local legislation)
b.
maintenance inspection
c.
pre-use inspection
d.
post-use inspection
After having successfully completed this lesson, the participants can:
Global Wind Organisation ©2025 / www.globalwindsafety.org
54 / 111
Made with FlippingBook interactive PDF creator