Operations training
Crane and Hoist / V2 02052025
23) The participants can describe the main tasks related to inspection and maintenance of cranes according to relevant manuals (Knowledge, basic level)
Main tasks to be performed when inspecting and maintaining cranes:
a.
cleaning
b.
visual inspection
c.
lubrication
d.
preventive maintenance
e.
function test
f.
load test
A load test may on some systems be part of an inspection. Yearly inspection and maintenance require a load test, either done by physical weight or a dynamometer
Note
For training purposes and to minimise wear on the lifting equipment, a load test may be conducted by lifting a load of between 150 kg and 250 kg
Note
The instructor shall:
Involve participants experiences on main tasks for maintaining mechanical equipment through discussions and Q&As to ensure alignment between the participants understanding and the safety awareness on main tasks for inspecting and maintaining cranes
The participants shall:
Take active part in the discussions and share their experiences and understandings on maintenance main tasks for maintaining mechanical equipment
Main tasks for inspecting and maintaining fixed, small cranes must be presented in accordance with relevant local legislation, manufacturers manuals, and company requirements
Note
Hand-outs and check-sheets for training purposes may be used
Note
See Annex 3 for examples of an inspection and maintenance list
Note
Global Wind Organisation ©2025 / www.globalwindsafety.org
58 / 111
Made with FlippingBook interactive PDF creator