Operations training
Crane and Hoist / V2 02052025
g.
Approval labels
14. Maintenance tools
A selection of examples of relevant maintenance tools, lubrication guns, and torque wrenches
15. Personal Protective Equipment Any equipment used during GWO training shall meet or exceed the minimum requirements of the regional/national standards listed in table A1.15.1 below. When working in a country where there is no applicable national standard then the equipment shall meet or exceed the minimum requirements of the European standards.
Region/National Specific Equipment Standards
Equipment
Europe
North America
China
United Kingdom
Slings Endless (round)
EN 1492-2
BS EN 1492-2
ASME B30.9 OSHA 1910.184
Webbing
EN 1492-1
JB/T 8521.1
BS EN 1492-1
Chain
EN 818
GB/T 24816
BS EN 818
Wire rope
EN 12385-4
GB/T 34198
BS EN12385-4
Spreader beam
EN 13155
ASME B30.20 ASME B30.26
BS EN 13155
Hooks
ASME B30.10
Shackles
EN 13889
ASME B30.20 ASME B30.26
BS EN 13889
Nut and bolt type
EN 3266+A1
BS EN 3266+A1
Swivel type
EN 3266+A1
BS EN 1492-1
Lifting bags
EN 1492-1
ASME B30.9 OSHA 1910.184 ASME B30.20 ASME B30.26
BS EN 1492-1
CLB/CLT container lugs
EN 13155
BS EN 13155
Crane
EN 13000 or EN 13852-1 or EN 13852-3
ASME B30.5 or
BS EN 13000 or BS EN 13852-1 or BS EN 13852-3
OSHA 1926.1401 OSHA 1926.1404 – 1411
Global Wind Organisation ©2025 / www.globalwindsafety.org
75 / 111
Made with FlippingBook interactive PDF creator