■ For fixed shelves at eye level which aren't able to hide a screw, the fixed shelf can be unlocked from the back and raised. The screw can be drilled at the same level as the shelf. When the shelf is dropped back down and locked back into place, the screw is not seen. ■ All side screws should be countersunk. ■ No side screw needs to be over tightened. Remember that this stage of the installation is only intended to prevent horizontal & vertical movement. The screw only needs to be just below the surface of the board to be effective. The goal is to secure the verticals right where they are. Overtightening screws will cause movement of the vertical which will cause other problems. Countersink deep. ○ When everything is locked together, any strong torque against any one vertical will very likely result in a blowout of a rafix stud. Be careful.
13
Made with FlippingBook. PDF to flipbook with ease