Drawers ● All drawers should have bumpers installed ● To allow room for the bumpers, the side rails on the drawers should be set back from the front about 1/8", which will leave enough room for the drawer to grab the catch at the back, use the bumper, and close completely. Mounting the Face Once the drawer box is installed, the face is mounted to the drawer box. To do so, start with a 1/8" drill bit and drill 2 holes in the front of the drawer box, 1.25” from the edge. This location will always hit full depth material, even if a 5-Piece or RTF face is being used.
39
Made with FlippingBook. PDF to flipbook with ease