■ Vertical movement (which would be in the upward direction) could cause the units to dislodge from the steel support rail.
■ Horizontal movement in the L-R direction stresses the connection points at the rafix studs ■ Horizontal movement in the F-B direction could cause the support brackets to bend and fail
● The securing should be done on each end and in every other "unit" or "bay" until the overall unit feels secure on the wall when pushed/pulled/generally abused. The following illustration shows the points where a small closet needs to be secured to the wall, separate from supporting the actual weight:
● Note also that this securing can be done so that it's not seen in the final installation. 1 - Floor mounted unit gets a screw through its top cleat, which is covered by a fastcap
8
Made with FlippingBook. PDF to flipbook with ease