Before installing the SRS-2, ensure the Night Mode and Sleep After settings are disabled within the TV’s Art Settings. 1. The SRS-2 connects to the back of the One Connect Box via an included Ex-Link Cable. 2. Next, the SRS-2 must be connected to its power source via the black power cable included with the SRS-2. Installation Setup
Scan QR code here for video walkthrough
Note - the USB power cable cannot be connected to the One Connect Box as the SRS-2 would lose power whenever the One Connect Box shuts off. 3. Once the SRS-2 is plugged into an active power source, the system light will flash blue while the unit initializes. Once the blue flashing ceases, the SRS-2 will begin operating with the current settings.
SAMSUNG THE FRAME TV
SAMSUNG ONE CONNECT CORD 15 feet
IR SENSOR LIGHT SENSOR
MONITOR SENSOR
(FRONT)
(FRONT)
POWER SYSTEM MOTION DETECT IR SIGNAL
SRS-2
SAMSUNG ONE CONNECT BOX
(BACK)
(BACK)
POWER
TV EX-LINK
Mini USB
(male)
X-link communication with One Connect Box
Wall Outlet to Power TV 6 feet
6 feet
15 feet
USB (male)
Power cube
Once these steps are completed, you can customize the settings to fit your needs.
Made with FlippingBook - Online catalogs