Druck PACE CM High-Speed Pressure Control Modules
Fully interchangeable control modules which seamlessly fit into the PACE chassis. These modules store calibration data, give high speed pressure control and are available in a wide variety of pressure ranges.
· Interchangeable robust control module that is easily installed into a PACE chassis · Calibration data stored in the control module (only the CM needs to be sent away for re-calibration) · High speed pressure control
· Wide choice of pressure ranges · Choice of standard, high or premium pressure measurement precision · Barometric reference available to enable pseudo gauge/ absolute indication & control · Aeronautical version available
The latest PACE Control module is CM3, for Reference Precision with PACE 5000 or 6000
· CM3 absolute pressures only (2 bar, 3.5 bar [30 psi, 50 psi]) · Accuracy: +/- 0.0016% Reading plus +/-0.0033% FS
· Controller stability: 0.001% of absolute range FS) · Pressure Ranges: (2 bar, 3.5 bar [30 psi, 50 psi]) · Selectable engineering units (bar, psi, kPa)
Shop Druck PACE CMs
6
Transcat.com/druck | 800-633-0561
Make Sure Your Instrument is
Made with FlippingBook Digital Publishing Software