Safety training
GWO Basic Safety Training / V19 02052025
f. connectors (carabiners) operate (and lock) as intended and cannot disconnect completely
g.
fall indicator
h.
brake function (twice)
i. observe correct alignment (max. angle between block and cable/webbing)
j.
observe product fall clearance (max. arrest distance)
k. observe manufacturer’s user manual for specific or additional requirements
l. differences in pre -use inspections depending on whether the device is pre -installed or not, according to manufacturer specifications
Stress the generic approach to pre -use inspection of a self -retractable lifeline (SRL) focusing on similarities and differences in design, functionality, and operation between different products
Explain that the participant is always required to familiari
se themselves with the specific SRL product
prior to use e.g., by reading the
manufacturer’s user manual
Facilitate practical exercises for participants to practise and demonstrate a pre
-use inspection of an
SRL
Provide constructive feedback on the participants’ performance during practical exercises
The participants shall:
Practise and demonstrate how to perform pre -use inspection on the SRL product required/chosen to instruct this module
LESSON 9 - MEASURES TO PREVENT INJURY DURING TRAINING
20 min.
The aim of this lesson is to reduce the risk of injury during training by introducing the participants to the control measures employed in the practical training area and how to warm up prior to performing rescue exercises.
After having successfully completed this lesson, the participants can:
63) Take responsibility for control measures employed in the practical training area and for warming up prior to performing rescue exercises (Ability, intermediate level)
Global Wind Organisation
©2025/ www.globalwindsafety.org
130 / 318
Made with FlippingBook - PDF hosting