Safety training
GWO Basic Safety Training / V19 02052025
Text updated
•
BST Manual Handling Module
Section 8.2. Duration of the BST Manual Handling Module:
Text updated
•
Section 8.5. Manual Handling Module timetable:
Text updated
•
Element 2.3
Text updated with the removal of “four”
•
BST Fire Awareness Module
Section 9.2. Duration of the BST Fire Awareness Module:
Text updated
•
Section 9.5. BST Fire Awareness Module timetable:
Text updated
•
BST Working at Heights Module
Section 10.2. Duration of the BST Working at Heights Module :
Text updated
•
Section 10.4. Equipment BST Working at Heights Module
Text revised and updated, including:
•
- Explanation of generic training “ This enables the participants to conduct pre -use inspection and to use other safety equipment products compared to those taught during this module (based on the manufacturer’s user manual). However, a location specific risk assessment might identify the need for additional instructions. - The introduction of safety instruction “ Additional fall protection must always be used during training activities at height. The training provider shall introduce control measures that lower the risks and hazards associated with a fall from height to an acceptable level, following the Hierarchy of Controls in their risk assessment. ”
Section 10.5. BST Working at Heights Module Timetable :
• The table is updated according to changes in the lesson 8 and the accompanying text has been updated.
Element 5.2 – Pre-use inspection
Learning objective 30 updated
•
Global Wind Organisation
©2025/ www.globalwindsafety.org
291 / 318
Made with FlippingBook - PDF hosting