Safety training
GWO Basic Safety Training / V19 02052025
The participants shall:
Engage in answering the questions and share understandings about:
a.
the essential manual handling principles
b. the further control measures and how these can be used to reduce risk of musculoskeletal injury in the participants’ own work
Loads used for training should be of a realistic and safe weight and must be in line with the guidance in the ‘lifting and lowering filter’ presented in Annex 3. Also see figure
Note
8.6.2 (below)
Figure 8.6.2 – Lifting and lowering filter
The use of mechanical and manual aids is recommended wherever possible to reduce risk of musculoskeletal injuries
Note
ELEMENT 2.4 - BASIC DYNAMIC RISK ASSESSMENT AND INTRODUCTION TO TILE PRINCIPLE
See Annex 3 for TILE principle
Note
Learning objective:
24) The participants can describe the TILE principle and how to apply them in manual handling situations (Knowledge, basic level)
Global Wind Organisation
©2025/ www.globalwindsafety.org
57 / 318
Made with FlippingBook - PDF hosting