Can be stored neatly in ORSY racks or ORSYMAT vending machines
Details/Application For steel-wood connections designed for tensile forces
The full thread starting immediately below the head allows for e.g. fitting-wood or sheet material-wood connections designed for tensile forces with high load-bearing capacity. Greater screw pull-out force is achieved by the maximum thread length. For applications in utilisation class 1 and utilisation class 2 (from Ø > 4 mm) • High-quality surface protection zinc blue passivated chromium(VI)-free, up to Ø 4 mm A2K 5 µm, from Ø 4.5 mm A3K 8 µm layer thickness • Suitable for use in utilisation class 1 (interior) and from a Ø > 4 mm in utilisation class 2 (covered outdoor area) according to EN 1995-1-1:2010-12 + DIN SPEC 1052-100:2013-08 • For screws from Ø 4.5 mm with zinc layer thickness 8 µm with Cr(III) passivation, the requirement of classification T2/C2 is fulfilled in accordance with prEN 14592:2017 (D)
RW drive
Pan head
Full thread
Asymmetrical high-performance thread (coarse)
Tip with milling ribs
Hardened steel
Zinc-plated/A2K or A3K
Instructions • For optimum use of the screw, the right-size RW bit must be used • Full-thread screws are suitable for secure mounting of fittings or thin materials. The screw length to be selected should be less than the plate thickness of substrate the screw is to be driven in
3
Adolf Würth GmbH & Co. KG, 74650 Künzelsau
Made with FlippingBook - Online magazine maker