ARIZONA ® PERFECT AUTOMOTIVE DRY ABRASIVE PAPER
For sanding old paint, filler, filler compounds, plastics, new parts for factory priming and matting of paint. Up to 20% greater material removal and increased service life by over 90% • P40 – 80: Coarse ceramic grain • P220 and higher: Newly developed stearate concept Short sanding time, effective working • 21-hole pattern for thorough and full- surface extraction of the sanding dust • Suitable for all common adhesive plates
P40 – 100, D-paper P120 – 240, C-paper P280 – 600, B-paper All-synthetic resin
Base material
Bond
P40 – 180, stearate coating P220 – 600, special coating which prevents clogging
Coating
P40 – 80: ceramic grain P100 – 600: aluminum oxide
Abrasive material
Scattering
Open scattering Sand yellow
Color
Available grits
P40 – 600
Forms
Disks, strips and rolls
P. Qty.
Number of holes
Adhe - sion sys. Grit Art. No.
Form Dia- meter Width x length
5506 247 104 1 5506 247 106 1 5506 247 108 1
Roll Roll Roll Roll Roll Roll Roll Roll Roll Roll Roll Roll
115 mm x 25 m 115 mm x 25 m 115 mm x 50 m 115 mm x 50 m 115 mm x 50 m 115 mm x 50 m 115 mm x 50 m 115 mm x 50 m 115 mm x 50 m 115 mm x 50 m 115 mm x 50 m 115 mm x 50 m
40 60 80
100 5506 247 110 1 120 5506 247 112 1 150 5506 247 115 1 180 5506 247 118 1 220 5506 247 122 1 240 5506 247 124 1 320 5506 247 132 1 400 5506 247 140 1 500 5506 247 150 1
Applications Grits P40 – P120
Initial sanding of new-part factory primers (KTL paints), sanding off old paint, sanding out stone-chip damage and rusty areas, sanding dented areas down to bare metal, pre-sanding of polyester and fine filler, leveling of filler edges. Grits P100 – P600 Initial sanding of old paint at the transi- tion to new paint, matting of top-coat paints, sanding of plain paints, thermo- plastic acrylic paints, clear lacquers, water-based paints, thick-film, priming, synthetic-resin and nitro fillers, spray filler, 2-component, MS-filler and reac - tion primers.
5506 343 004 50 5506 343 006 50 5506 343 008 100
Disk 150 mm Disk 150 mm Disk 150 mm Disk 150 mm Disk 150 mm Disk 150 mm Disk 150 mm Disk 150 mm Disk 150 mm Disk 150 mm Disk 150 mm Disk 150 mm Disk 150 mm Disk 150 mm Disk 150 mm
0 pc. 0 pc. 0 pc. 0 pc. 0 pc. 0 pc. 0 pc. 0 pc. 0 pc. 0 pc. 0 pc.
Klett Klett Klett Klett Klett Klett Klett Klett Klett Klett Klett Klett Klett Klett Klett
40 60 80
100 5506 343 010 100 150 5506 343 015 100 180 5506 343 018 100 220 5506 343 022 100 240 5506 343 024 100 320 5506 343 032 100 400 5506 343 040 100 500 5506 343 050 100
5506 353 004 50 5506 353 006 50 5506 353 008 100
21 pc. 21 pc. 21 pc. 21 pc.
40 60 80
100 5506 353 010 100
65
Made with FlippingBook - Online magazine maker