Árlen Ness

2017 PARTS & ACCESSORIES FOR HARLEY DAVIDSON ® / VICTORY ® / INDIAN ®

HARLEY

VICTORY

INDIAN

HARLEY VICTORY

INDIAN

A Air Cleaner Accessories

I Ignition Covers

57,62,63

138 138

187

150

— 187,188

K Kickstands L Lifter Blocks

Air Cleaners B Brake Arms C Cam Covers Clutch Covers Coil Covers

52-62

180-182

11

— —

36-37 26-27

123 113

Brake Caliper Housings

167

76

— —

Load Equalizers License Frames Lowering Kits License Assemblies

102

156

75

143,149

187

103 158-159 192

75 145,147,149 188

10-11

— —

90 39

— — — —

102

155

M Master Cylinder Covers Master Brake Reservoirs

Crash Bar Footpeg Mounts

D Derby Covers

92

150

189

88

143

— 125

Dash Accessories

Mirrors

18,82-84

— —

48-51 132-135 176-179

E Engine Covers

O Oil Dipsticks

75-78

143,145 187-189

73 72 71 88 76 77

— —

Engine Links

Oil Filters

78 78

— — — —

141

Engine Mount Brackets

Oil Pressure Gauges

— —

P Point Covers

Exhausts

64-69

140 141

— —

Exhaust Tips

70

— — — — — 185

F Fairings

Push Rod Covers Primary Covers

14-15 28-31 32-33

— 164

R Rear Fenders & Accessories

Floorboards

114-119 168-172 120-121 168-172

21 75

— 189

Foot & Shift Pegs

Rocker Box Covers

143

— —

Fork Boots Fork Legs

8 9

— — — —

Rotors

24-25 112

S Saddlebags

Forward Controls

34-37

122-123

173

20-22 23,94

— —

Frame Grills Front Fenders

91

— —

Saddlebags Latch Covers Saddlebags Latch Levers

152

12-13

108-109

165 183

95 17

— — — —

Fuel Tuners G Gas Caps Gas Tank

70

139

Seats

Shift Arms Shift Rods

34-35 122

173

85 17

144

184

38

124

— —

Shocks

— — 163

Grips

46-47 131,136,137 175

H Hand Controls Hand Levers

Side Covers Speaker Grills T Tank Dashes

18-19

— — — —

81

44 45 43

130

— — — —

20-22

— — — —

Handlebar Damper Kit

Transmission Covers

75

Handlebars

40-42

126-129

174

Triple Trees Turn Signals

5-7 106-107 — 98-101 152-155 190-191

Hardware Kits Headlight Bezels

— 141

97 90 89

— — — 187 — —

Turn Signal Brackets W Windshield Trims

102

— —

Horn Covers

Horn Kits

86-87

— —

Windshields

14-15 110

4

7 & 7 RAKED TRIPLE TREE FOR FLT MODELS These triple trees offer 7º of rake while maintaining 7º of trail when using a 23” wheel for the ultimate in handling. No frame modifications necessary when using larger diameter wheels. They are designed to work with 21” and 23” wheels only, 23” is recommended (stock diameter wheels will not handle correctly) 21” wheels provide 6-1/8” of trail. Triple trees are machined from forged billet aluminum and then finished in black anodize. Each kit includes top and bottom tree, pressed in steel stem, lower fork bearing and travel limiters. Batwing style fairings maintain stock position and do not require angled headlight wedges or special brackets to properly adjust headlights. Available for 97-13 models and 14-up models with 49mm forks When using 23” front wheels on Road Glide ® models, fairing bracket 20-376 or 20-377 is recommended for increased fairing clearance Important…The larger the wheel, the less fork travel. Always check lower tree to fender clearance. For 14-up kits,we have added travel limiters.

 

7 & 7 Raked Triple Trees

7 & 7 RAKED TREES 20-389

7° Raked Trees for 14-up FLT

20-379

7° Raked Trees for 97-13 FLT

FAIRING MOUNT KITS 20-377

98-08 Road Glide ® fairing mount kit

20-376

09-13 Road Glide ® fairing mount kit

20-377

Road Glide ® Fairing Mount Kit

5

6

“KO” RAKED TRIPLE TREE FOR SOFTAIL ® Properly rake your Softail ® for the use of 21”, 23”, and 26” wheels Triple Trees are constructed from CNC billet aluminum Upper exposed triple tree is chrome plated for a clean look, hidden lower triple tree is anodized black Each triple tree kit includes billet top and bottom trees, fork stem, lower bearing, and all necessary hardware When using 21” & 23” wheels stock length forks (30-1/2” long) are recommended. 26” wheels require the use of 1” shorter fork tubes Always check fender clearance under full compression, limit fork travel if needed Available for 00-up FLST & FLSTF SOFTAIL ® MODELS 20-372 6° Raked Trees for 00 - up FLST / FLSTF

  

 

STEEL KORE RAKE KIT BY MC BAGGERS 3-way bolt-on rake kit designed to properly rake your FLT touring model for 23, 26, and 30-inch front wheels while preserving factory fender clearance and achieving lower-than-stock ground clearance These kits are constructed from SAE-4140 high-tensile steel and 6061-T6 billet aluminum for maximum strength and durability 26” and 23” kits for 2014 and up do not require fork extensions (or any alterations to stock forks), a first in the HD touring industry Kits for 2014 and up include Goodridge #3 pre-cut and -measured braided brake lines, the MC Baggers ABS bearing, and extended fork cans Easy adjustment of steering head bearing without needing to disassemble the front end 23” kit is 37 degrees, 26” kit is 38 degrees, and 30” kit is 42 degrees Note: Always check fender clearance BOLT-ON TRIPLE TREE KIT 20-371 26”, 14-up FLT rake kit 20-373 26”, 09-13 FLT rake kit 20-374 30”, 14-up FLT rake kit 20-382 FLTR Fairing Mount, 15-up 20-378 30”, 09-13 FLT rake kit 20-383 FLTR Fairing Mount, 97-13 08-367 Raked Headlight Bezel, 97-up Batwing, black 08-361 Raked Headlight Bezel, 97-up Batwing, chrome

  

7

FORK BOOTS Each fork boot is machined from 6061-T6 billet aluminum Replaces OEM lower fork covers on Touring™ and Softail ® models Available in Retro,10-Gauge or Deep Cut styles 49mm fork boots are now available for 14-up Touring™ models in all styles Deep Cut and 10-Gauge styles are available in standard length and +2” length. +2” length is an additional 2” longer than standard fork boots for riders with large diameter wheels with longer than stock fork tubes Retro Style is offered in chrome, black anodize, or black anodize with diamond cut edges 10-Gauge and Deep Cut Styles are offered in chrome or black anodize finish

    

  

Sold in pairs 10-GAUGE, BLACK

+2” EXTENDED 10-GAUGE

20-015

10-Gauge, Black, 14-up FLT/FLTR/FLHR

20-017

10-Gauge, Black, FLT, FLHR 86-13 FLHT/06-13 FLHX Models

10-GAUGE, CHROME 20-016

10-Gauge Chrome, 14-up FLT/FLTR/FLHR

20-018

10-Gauge Chrome, FLT, FLHR, 86-13 FLHT/06-13 FLHX Models

PLUS 2” (10-GAUGE, BLACK) 20-055

10-Gauge Black, 14-up FLT/FLTR/FLHR

10-GAUGE

20-057

10-Gauge Black, FLT, FLHR 86-13 FLHT/06-13 FLHX Models

PLUS 2” (10-GAUGE, CHROME) 20-056

10-Gauge Chrome, 14-up FLT/FLTR/FLHR

20-058

10-Gauge Chrome, FLT, FLHR 86-13 FLHT/06-13 FLHX Models

DEEP CUT, BLACK

20-034

Deep Cut Black, 14-up FLT/FLTR/FLHR

20-024

Deep Cut Black, 86-up FLSTF, FLSTN (except 07)

20-014

Deep Cut Black, FLT, FLHR 86-13 FLHT/06-13 FLHX Models

DEEP CUT, CHROME 20-032

Deep Cut Chrome, 14-up FLT/FLTR/FLHR

+2” EXTENDED DEEP CUT

20-023

Deep Cut Chrome, 86-up FLSTF, FLSTN (except 07)

20-012

Deep Cut Chrome, FLT, FLHR, 86-13 FLHT/06-13 FLHX Models

PLUS 2” (DEEP CUT, BLACK) 20-029

Deep Cut Black, 14-up FLT/FLTR/FLHR

20-028

Deep Cut Black, 86-13 FLHT/06-13 FLHX Models

PLUS 2” (DEEP CUT, CHROME) 20-027

Deep Cut Chrome, 14-up FLT/FLTR/FLHR

20-026

Deep Cut Chrome, 86-13 FLHT/06-13 FLHX Models

DEEP CUT

RETRO, BLACK

20-037

Retro Black, 14-up FLT/FLTR/FLHR

20-004

Retro Black, 86-13 FLHT/06-13 FLHX Models

20-021

Retro Black, 86 - up FLSTF, FLSTN (except 07)

RETRO, CHROME

20-035

Retro Chrome, 14-up FLT/FLTR/FLHR

RETRO

20-002

Retro Chrome, 86-13 FLT/06-13 FLHX Models

20-020

Retro Chrome, 86-up FLSTF, FLSTN (except 07)

RETRO, DIAMOND CUT, BLACK 20-039

Retro Black Diamond Cut, 14-up FLT/FLTR/FLHR

20-008

Retro Black Diamond Cut, 86-13 FLHT/FLT/FLHR/06-13 FLHX

20-022

Retro Black Diamond Cut, 86 - up FLSTF, FLSTN (except 07)

RETRO DIAMOND CUT

8

10-GAUGE

DEEP CUT

SMOOTH

    “HOT LEG” FORK LEGS

CNC machined from billet aluminum Tapered design features a hidden axle Available in single and dual disc applications for FLT Touring & FXST/FLST Softail models (except Blackline, Rocker & Breakout models) Choose from Deep Cut, 10-Gauge & Smooth style

10-GAUGE, CHROME 40-516

SMOOTH, CHROME 40-501

14-up FLT, Single Disc

14-up FLT, Single Disc

40-517

40-503

14-up FLT, Dual Disc

14-up FLT, Dual Disc

40-520

06-520

08-13 FLT, Single Disc

08-13 FLT, Single Disc

40-524

06-500

08-13 FLT, Dual Disc

08-13 FLT, Dual Disc

40-522

06-522

00-07 FLT, Single Disc

00-07 FLT, Single Disc

40-526

06-503

00-07 FLT, Dual Disc

00-07 FLT, Dual Disc

06-550

08-up FLST, Single Disc

10-GAUGE, BLACK

40-518

06-554

14-up FLT, Single Disc

00-06 FLST, Single Disc

40-519

06-560

14-up FLT, Dual Disc

07-up FXST, Single Disc

40-521

06-564

08-13 FLT, Single Disc

00-06 FXST, Single Disc

40-525

08-13 FLT, Dual Disc

SMOOTH, BLACK

40-523

40-511

00-07 FLT, Single Disc

14-up FLT, Single Disc

40-527

40-513

00-07 FLT, Dual Disc

14-up FLT, Dual Disc

06-521

08-13 FLT, Single Disc

DEEP CUT, CHROME 40-500

06-502

14-up FLT, Single Disc

08-13 FLT, Dual Disc

40-502

06-523

14-up FLT, Dual Disc

00-07 FLT, Single Disc

06-524

06-504

08-13 FLT, Single Disc

00-07 FLT, Dual Disc

06-510

06-551

08-13 FLT, Dual Disc

08-up FLST, Single Disc

06-526

06-555

00-07 FLT, Single Disc

00-06 FLST, Single Disc

06-512

06-561

00-07 FLT, Dual Disc

07-up FXST, Single Disc

06-552

06-565

08-up FLST, Single Disc

00-06 FXST, Single Disc

06-556

00-06 FLST, Single Disc

REPLACEMENT AXLE (FOR ALL STYLES) 06-505 14-up FLT 06-516 00-07 FLT 06-517 08-13 FLT 06-508 00-06 FXST 06-509 07-up FXST 06-518 00-06 FLST 06-519 08-up FLST

06-562

07-up FXST, Single Disc

06-566

00-06 FXST, Single Disc

DEEP CUT, BLACK

40-510

14-up FLT, Single Disc

40-512

14-up FLT, Dual Disc

06-525

08-13 FLT, Single Disc

06-511

08-13 FLT, Dual Disc

06-527

00-07 FLT, Single Disc

06-513

00-07 FLT, Dual Disc

06-553

08-up FLST, Single Disc

06-557

00-06 FLST, Single Disc

9

Front, rear, and complete lowering kits are available Front lowering kits consist of front fork dampers that range from a 1”-2¾” drop Rear lowering kits are offered in fixed or adjustable drop depending on application Complete lowering kits include everything needed to drop the front and rear of the motorcycle, including a lowered kickstand All Ness kickstands included in complete lowering kits are constructed from forged steel LOWERING KITS

    

REAR LOWERING KITS

ADJUSTABLE REAR LOWERING KITS These adjustable lowering kits for Softail ® models allow you to customize the look and feel of the bike to the rider’s preference. Once installed to the rear suspension you are able to adjust the rear height by 1” to 2”.

FRONT LOWERING KITS

COMPLETE LOWERING KITS

These billet aluminum blocks properly relocate your rear shocks 1” back from their stock position. This effectively lowers the rear of your FLT model by 1”, giving a lower profile and the rider more control over the motorcycle with a lower center of gravity.

Each fork damper is shorter than stock and specifically drilled to lower your motorcycle while retaining a factory quality ride. Ranging from 2”-2¾” drop, each fork damper is model specific and utilizes factory fork springs.

Complete lowering kits include everything you need to lower your motorcycle correctly. Front fork dampers, rear lowering blocks or adjustable kits, and lowered kickstands are included in every kit. Lowering components in each kit will depend on application, FLT kits will be a fixed 1” drop while Softail ® kits will have a 1”-2” adjustable drop.

      REAR LOWERING KITS Drop the rear end of your bike for a sleek, low prole Visible kits nished in black or polished to match factory swingarm Kits available in adjustable or standard drop Adjustable kits lower from 1”- 2” Standard drop kit lower bikes approximately 1” Supplied with mounting hardware or designed to use factory hardware

ADJUSTABLE DROP 17-100

00-up Softail ® models

17-101

89-99 Softail ® models

STANDARD DROP

17-110

02-up FLT models (exc. models w/ soft bags & CVO or FLHXS models and shock adjustable models or models with coil overshocks)

28-001

28-002

NOTE: With all lowering kits, check all clearances prior to riding your motorcycle.

     FRONT LOWERING KITS Ness design simplies lowering the front end of your bike Specially designed fork dampers are shortened and drilled in a strategic position to obtain factory ride quality Utilizes factory fork springs Each kit includes 2 complete damper assemblies Will not t Springer™, Deuce™, 06-up FXD, or FXCW models 28-001 84-99 41mm FXST 00-14 41mm FXST & FLST (2” Lower) 1997-2013 41mm FLT except 02-06 FLT/FLHT (1-1/2” Lower) NOTE: Please check all clearances including front fender clearance with suspension travel bottomed out prior to riding your motorcycle. & FLST except FXSB and Springer™ (2-1/2” Lower) 28-002

17-100

17-101

17-110

10

COMPLETE LOWERING KITS Everything you need to lower the front and rear of most late model Harley-Davidsons ® Specially designed fork dampers lower the front end without replacing factory springs Both kits for Softail ® lower the front of FXST models by 2-1/2” and FLST models by 2” while the rear designs are adjustable to lower as much as desired Each kit includes 2 specially designed dampers, 2 adjustable rear shock adjusters, and a 1” shorter kickstand (fork oil not included)

17-031

07-13 FLT, except models w/ soft bags (excludes adjustable shock models) 02-up FLT, except models w/ soft bags (excludes CVO,FLHXS and models with adjustable or coil over shock models) 89-99 Softail ® , except Springer™ & Deuce™

17-110

17-026

17-031 Complete Lowering Kit

17-025

00-06 Softail ® , except Springer™ & Deuce™

17-032

07-up Softail ® , except Springer™, Deuce™ , Rocker™ (except FXSB)

NOTE: Always check ground clearance and tire to fender clearance when installing these kits.

   LOWERED KICKSTANDS A must when lowering your motorcycle Kickstands are 1” shorter than stock Fitment for: 84-up Softail ® ; 90-up Dyna ® 11-016 84-06 Softail ® models 11-021 07-up Softail ® models 11-023 90-up Dyna ® models 11-022 07-up FLT models

11-021

11-016

HIDDEN SPRING KICKSTANDS Features internal spring loaded ball bearing lock for a clean look and optimum functionality Chrome kickstands add that extra touch of styling to an often overlooked piece of your motorcycle The telescopic chrome plated kickstands are adjustable in height by 1 inch Mounting brackets are machined from polished stainless steel to eliminate chrome wear in high contact areas All of these kits feature a hidden ball bearing design return spring for positive stock feel while retaining a clean look 11-030 84-99 Softail ® , 4-Spd B/T, front mount 11-032 94-99 Softail ® , rear mount 11-031 * 00-up Softail ® , rear mount

NOTE: Custom mounting may be required.

11-030

11-032

11-031

11

WRAPPER FRONT FENDERS

Our Wrapper front fenders perfectly follow the contour of your 21”, 23”, or 26” front wheel Fenders are available in carbon fiber composite and standard composite materials Carbon composite fenders are constructed from a blend of composite materials with a layer of carbon fiber for fenders as strong as steel with less than half the weight Standard composite fenders are constructed from high quality fiberglass materials that are cured in a computer controlled oven over a wide heat range for durability and strength Both composite style fenders are an average of 8 lbs lighter than most similar steel fenders, saving weight and improving gas mileage Ready to paint finish Available for FLT / FLST / FXST model

  

  

FLT CARBON COMPOSITE FENDERS 87-13 FLT CARBON COMPOSITE 06-757

21” Wrapper, carbon composite, FLT

06-746

23” Wrapper, carbon composite, FLT

06-749

26” Wrapper, carbon composite, FLT

14-up FLT CARBON COMPOSITE 06-723

21” Wrapper, carbon composite, FLT

Carbon Composite

Standard Composite

06-724

23” Wrapper, carbon composite, FLT

06-726

26” Wrapper, carbon composite, FLT

FLT STANDARD COMPOSITE FENDERS 87-13 FLT STANDARD COMPOSITE 06-745 23” Wrapper fender, FLT 06-747 26” Wrapper fender, FLT 14-up FLT STANDARD COMPOSITE 06-725 23” Wrapper fender, FLT 06-727 26” Wrapper fender, FLT

SOFTAIL ® CARBON COMPOSITE FENDERS 86-up Softail ® CARBON COMPOSITE 06-756

21” Wrapper, carbon composite, FLST, 86-up (exc.07) 23” Wrapper, carbon composite, FLST, 86-up (exc.07)

06-744

12

    BIG WHEELER FRONT FENDER Great styling for the front of your Bagger Designed to work with a 21” x 3.5” wheel on 87-13 FLT models Fiberglass construction Available in a paintable nish 06-764 21” Big Wheeler Fender

BIG WHEELER

    21” FENDER BRACKETS FOR 14-UP TOURING Properly re-locates the front fender on 14-up Touring models when using a 21” front wheel. Designed to work with a 21” x 3.5” wheel on 14-up FLT models Steel construction Sold in pairs. 60-122 21” Fender bracket kit for 14-up FLT for stock legs

60-123

21” Fender bracket kit for 14-up FLT for Ness “Hot Leg” fork legs

21” FENDER BRACKETS

4-3/4” CAFE FRONT FENDER Café fender offers classic Ness styling and is intended for use on narrow glides with 19” or 21” wheels.

  Un-drilled for custom applications. Constructed from heavy ABS plastic. 06-015 4-3/4” Cafe front fender

CAFE

    6-1/4” WIDE SPORT FRONT FENDER Sport fender designed for a performance look. Un-drilled for custom applications. Constructed from heavy ABS plastic Fits Wide Glide forks with 16”-18” wheels 06-027 6-1/4” Wide-Sport front fender for wide-glide

WIDE SPORT

13

WIDE GLIDE

ORIGINAL FAIRING KITS

The fairing that started it all Universal design can be used on various applications Constructed of heavy ABS plastic while the windshield is made from smoked plexiglass. Each fairing kit includes: 1 fairing body, 1 smoked windshield, universal mounting brackets and windshield mounting screws

  

ORIGINAL FAIRING KITS 06-041

Ness plain fairing kit

06-043

Ness louvered fairing kit

06-087 *

Ness wide-glide & custom mid-glide fairing kit

REPLACEMENT ACCESSORIES 06-047

LOUVERED

Replacement smoked windshield

06-048

Custom headlight bracket

06-049 Replacement fastener kit * Does NOT include brackets. 06-later FXDWG models require SKU# 06-087.

PLAIN

BOB DRON FAIRING KIT FOR ROAD KING ® Classic fairing provides protection from the elements Accepts factory spot lights Fairing body constructed in heavy ABS, windshield is smoked plexiglass Fairing kits include: 1 fairing body, 1 smoked windshield, stainless steel mounting brackets and windshield mounting hardware Fitment for 97-17 FLHR models 06-950 Bob Dron fairing kit 06-951 Repl. windshield, dark smoked Please check t and nish prior to painting. Arlen Ness will not be responsible for any damage sustained to paint jobs. NOTE: When mounting fairing to 73-up H.D. Narrow Glide front ends, we suggest using our custom headlight bracket (06-048) which places the headlight in the correct position. Ness wide glide fairing kits (06-087) require fabrication of custom mounting brackets. Inverted front ends require fabrication of custom mounting brackets as well.

  

BOB DRON FAIRING KIT

14

DIRECT BOLT-ON FAIRINGS FOR SPORTSTER ® AND DYNA ® MODELS

     Fairing adds style and protection from the elements The fairing body is constructed from heavy ABS plastic, which is the same material used for OEM saddlebags. Windshield is smoked plexiglass Choose from paintable finish or gloss black coated ABS finish Available for 04-up Sportsters with 39mm forks and top mount headlight, 06-up Dyna models (Except FXDF & FXDWG), and 16-up Sportster 48 models. DIRECT BOLT-ON FAIRING KITS FOR SPORTSTER ® 06-037 04-up Sportster ® (excludes 16-up 48 XL), gloss black nish 06-038 16-up 48 XL, gloss black nish 06-039 04-up Sportster ® (excludes 16-up 48 XL), paintable nish 06-047 Replacement smoked windshield DIRECT BOLT-ON FAIRING KITS FOR DYNA ® 06-033 06-up Dyna ® FXD gloss black nish * 06-035 06-up Dyna ® FXD paintable nish * 06-047 Replacement smoked windshield * 06 FXD models with bottom mount headlight. Does NOT t FXDF, FXDWG Dyna ® models.  The Original Arlen Ness fairing now available in a direct bolt-on kit for your Sportster or Dyna, no custom fabrication needed

SPORTSTER, Paintable

SPORTSTER, Gloss Black

15

       ARLEN NESS WINGED STRETCHED GAS TANK Our all new stretched gas tank for 08-up touring models feature smooth flowing design that gives your factory touring model the custom look 6 gallon fuel capacity Steel construction that is hand finished to perfection The use of a custom seat is required, will not work with factory seat Gas tank includes steel gas tank, steel dash, rubber trim and all necessary hardware Designed to fit 08-up Touring models, direct bolt on installation with no modification of any kind required 3 different seats are available: Silhouette, Villain and Sorrento ARLEN NESS WINGED STRETCHED GAS TANK 70-700 Arlen Ness Winged Stretched Gas Tank SEATS FOR WINGED STRETCHED GAS TANK 19-852 Silhouette Pleated Seat for Arlen Ness Winged Stretched Gas Tank 19-853 Sorrento Seat for Arlen Ness Winged Stretched Gas Tank 19-854 Villain Seat for Arlen Ness Winged Stretched Gas Tank NOTE: Will not t Roadking models, unless factory or aftermarket gauges are relocated.

19-852 Silhouette

19-853 Sorrento

19-854 Villain

17

FLOW DASH

Designed to fit 08-up Street Glide ® and Road Glide ® models (FLHX, FLHT, FLT, FLTR). Will not fit Road King ® (FLHR models) Available in gloss black Add a custom Arlen Ness gas cap to compliment your new dash Will work with factory seat Our latest dash design looks great on 08-up Road Glide ® or Street Glide ® models. This unique design will bring life to your tank and gives a killer custom look. Constructed of heavy ABS plastic for premium quality and durability. 

  

FLOW DASH

04-112

08-up FLT, Flow dash kit, gloss black

   SIDE COVERS FOR FXR™ Available for all FXR™ models 82-94 Constructed from high-impact ABS plastic Side covers conceals brake and electrical components while providing an appealing look Ready for prep and paint 03-600 FXR™ side cover kit, pair 

03-600 Side Covers

18

SIDE COVERS FOR FLT MODELS Arlen’s design nicely blends into your factory saddle bags or Ness Big Bags for a clean custom look. Covers are also longer than stock to add additional styling and surface area for your paint scheme Covers are designed to t directly over the factory units by drilling 3 small holes in unseen areas of the factory side cover Covers are available in gloss black coated ABS nish to eliminate a trip to your painter unless custom paint is desired. Available for 97-13 FLT models Made in the U.S.A. and sold in pairs 03-613 Side Covers, 97-08 FLT 03-614 Side Covers, 09-13 FLT NOTE: Not for use with crash bars

 

03-614

03-614 w/o Crash Bars for 09-13 FLT

19

Dn - N -

Out

20

DOWN-N-OUT STRETCHED SADDLEBAGS We set the standard for extended bags back in the early 90’s, and we gured it was time to raise the bar again. The Down-N-Out bags from Arlen Ness are 6” longer and 2” lower than our original Big Bags. They feature a patent pending taper on the lower section of the bag for a clean new look and an extra 2” of ground clearance. These bags are constructed from high quality composite materials and are oven cured over a wide heat range to ensure stability and durability. Each bag has hand placed bers strategically located to provide the highest structural integrity possible and a maximum strength to weight ratio. No shiny gel coat nish to sand and prime, every part comes nished, primed with a super high quality polyester sanding primer and is ready to paint. As always, each bag is t and lid tested and passes a 14-point quality control process. These bags are strong, long, light, and perfectly balanced. Down-N-Out Bags are designed to t factory lids and hardware. The bags are available in a primed, ready to paint nish. Sold in pairs for 93-up FLT applications, lids and mounting hardware (03-525) not included. 93-13 FLT 06-978 Dual exhaust stretched bag kit 06-979 Single exhaust stretched bag kit 06-982 NO exhaust stretched bag kit 14-up FLT 60-111 Dual exhaust stretched bag kit 60-113 Single exhaust stretched bag kit 60-115 NO exhaust stretched bag kit NOTE: please check t and nish of bags prior to painting bags. Arlen Ness will not be responsible for any damage sustained to paint jobs. DOWN-N-OUT STRETCHED FENDERS Down-N-Out fender kits are a direct replacement for 98-up FLT Bagger models. These new super stretched fenders are designed to work and ow with our Down-N-Out saddlebags. Each fender is constructed from high quality composite materials and oven cured over a wide heat range to insure stability. It is primed with a high quality polyester sanding primer and is ready to paint. Each fender is put through a 14-point quality control process. Most kits includes a billet Ness LED license/taillight assembly with turn signals that mount in the recessed area of the fender. Also

  

DOWN-N-OUT, Dual Exhaust

DOWN-N-OUT, Single Exhaust

includes exhaust extensions and chrome heat shields. Hidden steel fender support brackets and exible hidden antenna are also included for an extra clean installation. Available with dual, single or NO exhaust cut-outs. Available in primed ready to paint nish. FENDERS

 

06-480 97-08 FLT, dual exhaust 06-482 09-13 FLT, dual exhaust 60-110 14-up FLT, dual exhaust

06-483 Single Exhaust

06-486 97-08 FLT, dual w/o license plate pocket/assembly 06-487 09-13 FLT, dual w/o license plate pocket/assembly

06-481 97-08 FLT, single exhaust 06-483 09-13 FLT, single exhaust 60-112 14 - up FLT, single exhaust 06-474 97-08 FLT, NO exhaust 06-476 09-13 FLT, NO exhaust 60-114 14 - up FLT, NO exhaust

06-487 Dual w/o Pocket

06-474 NO hole Exhaust

NOTE: please check t and nish of bags prior to painting bags. Arlen Ness will not be responsible for any damage sustained to paint jobs.

21

ANGLED SADDLEBAGS Arlen’s angled cut design gives you the ultimate look while providing maximum cornering clearance. Each saddlebag is stretched 5” longer than stock to cover your muffler from front to back and provide a stretched look. These injected molded ABS saddlebags provide consistent quality,superior strength and rigidity. Perfect fit every time from a name you can trust. Saddlebags have cutouts for dual exhaust applications. For custom applications with single exhaust or no exhaust exits, block off plugs are available separately. Saddlebags are sold individually. Please order a right and left for each motorcycle

 

1997-13

(Sold individually) ANGLED SADDLEBAGS 60-150

97-13 FLT, Left Side

60-151

97-13 FLT, Right Side

60-155

14-up FLT, Left Side

60-156

14-up FLT, Right Side

BLOCK-OFF PLUGS 60-152

14-UP

97-13 FLT, Left Side

60-153

97-13 FLT, Right Side

     ANGLED FENDER EXTENSION Our Angled Fender Extension bolts straight to your stock rear fender while utilizing the factory tri-bar light Provides the stretched fender look. Fills the gap between rear fender and saddlebags Matches perfectly with our stretched Angled Saddlebags Constructed from heavy ABS plastic and ready to paint Available for 09-up FLT models with rear fenders equipped with tri-bar lights 60-154 Angled Fender Extension 14-up FLT 60-158 Angled Fender Extension 09-13 FLT

60-152/60-153 Block-Off Plugs

60-154 Angled Fender Extension

 22 NOTE: please check t and nish of bags, fender extension and block-off plugs prior to painting. Arlen Ness will not be responsible for any damage sustained to paint jobs.

SADDLEBAG LATCH KIT

Direct replacement saddlebag lid latch kit Economically priced compared to expensive OEM latch kit Comes with all necessary hardware and hinges, except saddlebag lock Great for aftermarket custom saddlebags Fitment for 93-13 FLT models

    

03-525

Latch Kit

03-525 Latch Kit

23

BIG BRAKE FLOATING ROTOR KITS Power is nothing without control, our Big Brake floating rotor kits dramatically improve braking performance while adding performance styling to your factory wheel Each kit provides a minimum of 30% more stopping power than smaller factory rotors Each kit includes oversized rotor cut from 420 stainless steel, caliper bracket machined from billet aluminum and necessary hardware Utilizes factory brake caliper, brake hose and wheel. Easy bolt-on installation with no need to re-bleed your brake system. 14” kits are designed for 00-up FLT touring models with 17” larger front wheels, available in spoke mounted or hub mounted applications 15” kits are designed for Dyna, Softail & Sportster models with 19” or larger front wheels, available in spoke or hub mounted applications Dyna models are also available with a wave style 15” floating rotor 14” BIG BRAKE KIT 02-960 08-13 FLHR/FLHX/FLT models with 17” or larger front wheel, LH 02-961 08-13 FLHR/FLHX/FLT models with 17” or larger front wheel, RH 02-962 14-up FLHR/FLHX/FLT models with factory cast wheel, LH 02-963 14-up FLHR/FLHX/FLT models with factory cast wheel, RH 02-970 00-07 FLHR/FLHX/FLT models with 17” or larger front wheel, LH 02-971 00-07 FLHR/FLHX/FLT models with 17” or larger front wheel, RH

   

14” FOR 14-UP FLT

NOTE: Will not work with Touring models equipped with Ness “Hot Leg” fork legs

14” FOR 00-13 FLT

24

15” BIG BRAKE KIT 02-990

Wave 00-05 Dyna/00-up Softail ® models with hub mounted 11.5 rotor and 18” or larger wheel, LH (Except Springer Models) Wave 00-05 Dyna/00-up Softail ® models with hub mounted 11.5 rotor and 18” or larger wheel, RH (Except Springer Models) Wave 06-up Dyna ® models with spoke mount rotor, LH

02-992

02-991

02-993 Wave 06-up Dyna ® models with spoke mount rotor, RH 02-964 * 06-up Dyna ® models with spoke mount rotor, LH 02-968 * 06-up Dyna ® models with spoke mount rotor, RH 02-965 * 00-05 Dyna/ 00-up Softail ® models with hub mounted 11.5 rotor and 18” or larger wheel, LH (Except Springer Models) 02-967 * 00-05 Dyna/ 00-up Softail ® models with hub mounted 11.5 rotor and 18” or larger wheel, RH (Except Springer Models) 02-966 00-13 Sportster ® models with hub mounted rotor and 19” or larger wheel, LH 02-973 * 06-up Dyna ® /Softail ® models with 11.8 stock hub mounted rotor, RH 02-972 * 06-up Dyna ® /Softail ® models with 11.8 stock hub mounted rotor, LH 02-969 14-up Sportster ® models with hub mounted rotor, LH NOTE: Designed for use with factory fork legs & calipers, will not work with Arlen Ness “Hot Leg” fork legs. * Does not fit FLD (Switchback) models

15” FOR 06-UP DYNA/SPOKE MOUNT

15” FOR 06-13 SPORTSTER & 06-UP DYNA/HUB MOUNT

25

BILLET BRAKE CALIPER HOUSINGS

BILLET BRAKE CALIPER HOUSINGS These billet caliper housings give you a full custom caliper look while utilizing your proven and tested stock brake internals Stock calipers work better than ever before, they are engineered for reliability and performance. These calipers utilize the countless testing hours and millions of dollars spent on factory brake performance All billet housings accept the original pistons, seals, brake pads, and internal hardware. Rear caliper housings may require the use of factory caliper bracket Seal kits are available, replacement seals are not included with caliper housings 08-17 FLT MODELS (FRONT ONLY) 02-846 Left Caliper Housing, Chrome 02-847 Left Caliper Housing, Black 02-848 Right Caliper Housing, Chrome 02-849 Right Caliper Housing, Black 00-07 FXST, FLST, FXD, FXDWG, FLHT, FLTR, FLHX and 00-03 XL 02-813 Left Caliper Housing, Black 02-815 Right Caliper Housing, Black 08-17 SOFTAIL ® & DYNA ® MODELS (FRONT) 02-840 Left Caliper Housing, Chrome 02-841 Left Caliper Housing, Black 08-17 SOFTAIL ® & DYNA ® MODELS (REAR) 02-842 Rear Caliper Housing, Chrome 02-843 Rear Caliper Housing, Black 07-17 SPORTSTER™ MODELS (FRONT) 02-861 Left Caliper Housing, Chrome 02-862 Left Caliper Housing, Black 08-17 SPORTSTER™ MODELS (REAR) 02-810 Left Caliper Housing, Chrome 02-811 Left Caliper Housing, Black SEAL KITS 02-845 Replacement Seal kit for 08-17 FLT (Front) 2 req. per bike 02-820 Replacement Seal kit for 08-17 Dyna & Softail (Front) 02-821 Replacement Seal kit for 08-17 Dyna & Softail (Rear) 02-822 Replacement Seal kit for 07-17 Sportster (Front) 02-823 Replacement Seal kit for 07-17 Sportster (Rear) 02-824 Replacement Seal kit for 07-earlier FLT (Left/Right)

  

FRONT FLT

REAR Softail ® / Dyna ®

FRONT Softail ® / Dyna ®

NOTE: Replacement seals are not included. They must be purchased separately.

FRONT Sportster™

REAR Sportster™

26

FRONT FLT

Each bearing is designed to work only on the specific application. Stock, 21”, 23” or 26” front wheels Will work with most oversized 21”, 23” and 26” front wheels Sold individually Eliminate ABS malfunction & warning lights when using oversized wheels on HD models equipped with ABS brake systems. ABS BEARINGS 

 

STOCK

21”

23”

26”

RETAIL

18-894 18-895 18-896 18-897

25MM

27

10-GAUGE FLOORBOARDS CNC machined from forged billet aluminum 10-Gauge style features a cut through design for reduced weight and a unique look Rubber inserts offer foot traction and protects the nish of the board Matching passenger boards available

 

   

Driver Floorboards:18”L x 5.75”W x 1” thick Passenger oorboards: 7”L x 4”W x 1”thick Choose from chrome or black anodize nish

DRIVER FLOORBOARDS 06-861 10-Gauge, black 06-860 10-Gauge, chrome PASSENGER BOARDS 06-863 10-Gauge, black 06-862 10-Gauge, chrome FOOTPEGS 06-114 10-Gauge, black 06-104 10-Gauge, chrome SHIFT PEG 06-117 10-Gauge, black 06-107 10-Gauge, chrome REPLACEMENT RUBBERS

DRIVER BOARDS

PASSENGER BOARDS

06-806 Driver Repl Rubbers (30 piece) 06-807 Passenger Repl Rubbers (16 piece)

FOOTPEGS AND SHIFT PEGS

28

DEEP CUT FLOORBOARDS CNC machined from forged billet aluminum

 

Deep Cut design features aluminum accent cuts on both the top of the oorboard and sides for eye catching style at every angle Rubber inserts offer foot traction and protects the nish of the board Extended length for comfort

   

Driver oorboards: 18”L x 5.75”W x 1”thick Passenger oorboards: 7”L x 4”W x 1”thick Choose from chrome or black anodize nish DRIVER FLOORBOARDS

06-838 Deep Cut, chrome 06-833 Deep Cut, black PASSENGER BOARDS

06-839 FLHX/Universal Peg Mount, chrome 06-834 FLHX/Universal Peg Mount, black 06-866 94-13,15-17 FLHR/82-UP FLT, chrome 06-867 94-13,15-17 FLHR/82-UP FLT, black FOOTPEGS

DRIVER BOARDS

06-472 Deep Cut, black 06-470 Deep Cut, chrome SHIFTER / BRAKE PEG

PASSENGER BOARDS

06-473 Deep Cut, black 06-471 Deep Cut, chrome REPLACEMENT RUBBERS 06-846 Driver Repl Rubbers (34 piece) 06-847 Passenger Repl Rubbers (12 piece)

FOOTPEGS AND SHIFT PEGS

29

BEVELED FUSION SERIES FLOORBOARDS Forged CNC billet aluminum with knurled rubber for clean custom style with excellent foot traction Beveled style features deep sculpted CNC machined pockets around the perimeter of the floorboard that are finished off with a beveled machined edge Knurled rubber insert offers foot traction in any condition 3 mounting points for up to 3” of adjustability (Front to Rear) Matching foot pegs and passenger floorboards available

     

Driver Floorboard Dimensions: 13.8” L x 5.0” W Passenger Floorboard Dimensions: 10.0” L x 4.0” W Choose from chrome or black anodize finish DRIVER FLOORBOARDS 15-409 Beveled Fusion, chrome 15-410 Beveled Fusion, black PASSENGER BOARDS 15-420 Beveled Fusion, chrome, 86-17 FLST/94- 13,15-17FLHR/82-up FLT 15-421 Beveled Fusion, black, 86-17 FLST/94- 13,15-17FLHR/82-up FLT FOOTPEGS

DRIVER BOARD

PASSENGER BOARD

07-928 Beveled Fusion, chrome 07-929 Beveled Fusion, black SHIFTER / BRAKE PEG 07-930 Beveled Fusion, chrome 07-931 Beveled Fusion, black

FOOTPEGS AND SHIFT PEGS

NOTE: Passenger boards will not t peg style mounting brackets.

30

RETRO FLOORBOARDS AND SHIFT PEG Retro styling inspired by your engine’s cooling ns Constructed from chrome plated billet aluminum Full length rubber inserts offer excellent grip and comfort Designed to t FLT 82-up FLT/FLHT/FLHR and 86-up FLST models Driver oorboards: 18”L x 6”W x .75”thick DRIVER FLOORBOARDS BOARDS 06-842 Retro Driver, chrome

   

SHIFT PEG 07-491

Retro Shift Peg, chrome

DRIVER BOARD

SHIFT PEG

31

FUSION SERIES FOOT AND SHIFT PEGS

The Fusion of CNC billet aluminum and high traction rubber for added style and excellent foot traction Knurled rubber inserts have been engineered and tested to offer excellent foot traction in wet or dry conditions All style are available in chrome or black anodize nish Knurled styles are available with chrome or black anodized billet ends, as well as brass Footpegs are sold in pairs, shift pegs sold individually

SMOOTHIE

SMOOTHIE

CHROME BLACK FOOTPEG 07-920 07-921 SHIFT PEG 07-922 07-923

DEEP CUT

CHROME BLACK FOOTPEG 07-908 07-909 SHIFT PEG 07-918 07-919

DEEP CUT

BEVELED

CHROME BLACK FOOTPEG 07-928 07-929 SHIFT PEG 07-930 07-931

BEVELED

32

KNURLED

CHROME BLACK FOOTPEG 07-924 07-925 SHIFT PEG 07-926 07-927

KNURLED BRASS FOOTPEG 07-932 SHIFT PEG 07-933

KNURLED

ORIGINAL FOOT & SHIFT/BRAKE PEGS Deep Cut and 10-Gauge pegs are CNC machined from billet aluminum 10-Gauge pegs feature a lightweight aggressive design that adds style while reducing weight Deep Cut pegs feature a conical prole with smooth accent cuts for eye-catching style at every angle Matching grips, boards and more available Choose from chrome or black nish Hardware included

   

Sold in pairs 10-GAUGE

CHROME BLACK FOOTPEG 06-104 06-114 SHIFT/BRAKE PEG 06-107 06-117

10-GAUGE

DEEP CUT

CHROME BLACK FOOTPEG 06-470 06-472 SHIFT/BRAKE PEG 06-471 06-473

DEEP CUT

33

DEEP CUT SOLO SHIFT KITS CNC machined from 6061-T6 billet aluminum

 

Adjustable, each solo shifter is splined at the mounting point to allow the rider to adjust the shift arms angle to their preference 1” longer than stock shift arms Single shift design allow riders to have more foot room on the oorboard Offered in our Deep Cut style Matching Deep Cut billet shift peg is included in each kit Available for: 82-up FLT/FXST/FXD SOLO SHIFTER KIT 19-756 82-17 FLT / FXST / FXD, chrome 19-757 82-17 FLT / FXST / FXD, black DEEP CUT INNER SHIFT LEVERS The nishing touch for your foot control section CNC machined from 6061-T6 billet aluminum Replaces stock inner shift lever and will work with stock or any aftermarket shift rod Softail ® inner shift includes spline and all necessary hardware Available for 82-up FLT, 07-up FLST only & 07-up FXST

    

DEEP CUT Solo shifter

  

INNER SHIFT LEVER 19-758

82-17 FLT, chrome

19-759

82-17 FLT, black

19-737

07-up FLST only, chrome

19-738

07-up FLST only, black

19-733

07-up FXST, chrome

DEEP CUT Inner shifter for Softail ®

19-732

07-up FXST, black

34

DEEP CUT

HEEL/TOE SHIFT KITS CNC machined from billet aluminum Offered in Deep Cut, Radius and 10-Gauge styles Deep Cut and 10-Gauge styles include matching billet shift peg Radius styles come without shift peg and allows the use of any aftermarket shift peg on pages 32-33 Standard Length & “EZ” lengths are available for riders of varying heights Standard length is 1” longer than stock shifter while “EZ” is 1” shorter than stock shifter Matching shift arms, oorboards, pegs and more are avail- able Available for: 82-up FLT, 00-up FLST HEEL/TOE SHIFT KITS (1” LONGER THAN STOCK) 19-791 82-17 FLT & 00-up FLST, Deep Cut, chrome 19-792 82-17 FLT & 00-up FLST, Deep Cut, black 19-761 82-17 FLT & 00-up FLST, Radius, black 19-790 82-17 FLT & 00-up FLST, Radius, chrome 40-106 82-17 FLT & 00-up FLST, 10-Gauge, chrome 40-107 82-17 FLT & 00-up FLST, 10-Gauge, black EZ HEEL/TOE SHIFT KITS (1” SHORTER THAN STOCK) 40-100 82-17 FLT & 00-up FLST, Deep Cut, chrome 40-101 82-17 FLT & 00-up FLST, Deep Cut, black 40-102 82-17 FLT & 00-up FLST, Radius chrome 40-103 82-17 FLT & 00-up FLST, Radius black 40-104 82-17 FLT & 00-up FLST, 10-Gauge, chrome 40-105 82-17 FLT & 00-up FLST, 10-Gauge, black NOTE: Standard length Heel/Toe shift will not work on 14-up FLT models with liquid cooled fairing lowers

  

EZ DEEP CUT

RADIUS

EZ RADIUS

10-GAUGE

35

BRAKE ARM KITS

CNC machined from billet aluminum Available in Deep Cut, Radius and 10-Gauge styles

   

Deep Cut and 10-Gauge styles include matching billet shift peg Radius style does not include shift peg, allowing you to choose any aftermarket or factory footpeg you desire Standard Length & “EZ” lengths are available for riders of varying heights Standard length is 1” longer than factory brake arm while “EZ” is 1” shorter than factory for a total of 2” difference between the two lengths Matching shift arms, oorboards, pegs and more are available Available for: 97-up FLT, 00-up FLST & FXST, 03-up FXDWG, 08-up FXDB w/forward controls

DEEP CUT STANDARD (1” LONGER THAN STOCK) 19-773

97-07 FLT, Deep Cut, chrome

19-768

97-07 FLT, Deep Cut, black

19-774

08-13 FLT, Deep Cut, chrome

19-778

08-13 FLT, Deep Cut, black

19-763

14-up FLT, Deep Cut, chrome

19-764

14-up FLT, Deep Cut, black

19-750

00-up FLST, Deep Cut, chrome

19-751

00-up FLST, Deep Cut, black

19-752

00-13 FXST, Deep Cut, chrome

19-753

00-13 FXST, Deep Cut, black

19-754

03-up FXDWG & 08-17 FXDB, (forward control only) Deep Cut, chrome 03-up FXDWG & 08-17 FXDB, (forward control only) Deep Cut, black

19-755

DEEP CUT EZ (1” SHORTER THAN STOCK) 40-110

Deep Cut for FLT / FLST

97-07 FLT, Deep Cut, chrome

40-111

97-07 FLT, Deep Cut, black

40-130

08-13 FLT, Deep Cut, chrome

40-131

08-13 FLT, Deep Cut, black

40-140

14-up FLT, Deep Cut, chrome

40-141

14-up FLT, Deep Cut, black

40-116

00-up FLST, Deep Cut, chrome

40-117

00-up FLST, Deep Cut, black

Deep Cut EZ for FLT / FLST

Deep Cut for FXDWG

36

RADIUS (1” LONGER THAN STOCK) 19-772

97-07 FLT, Radius, chrome

19-739

97-07 FLT, Radius, black

19-775

08-13 FLT, Radius, chrome

19-746

08-13 FLT, Radius, black

19-766

14-up FLT, Radius, chrome

19-760

14-up FLT, Radius, black

19-767

00-up FLST, Radius, chrome

19-769

00-up FLST, Radius, black

RADIUS EZ (1” SHORTER THAN STOCK) 40-112

97-07 FLT, Radius, chrome

40-113

97-07 FLT, Radius, black

40-132

08-13 FLT, Radius, chrome

40-133

08-13 FLT, Radius, black

40-142

14-up FLT, Radius, chrome

40-143

14-up FLT, Radius, black

40-118

00-up FLST, Radius, chrome

40-119

00-up FLST, Radius, black

10-GAUGE (1” LONGER THAN STOCK) 40-114

97-07 FLT, 10-Gauge, chrome

Radius for FXST

40-115

97-07 FLT, 10-Gauge, black

40-134

08-13 FLT, 10-Gauge, chrome

40-135

08-13 FLT, 10-Gauge, black

40-120

14-up FLT, 10-Gauge, chrome

40-121

14-up FLT, 10-Gauge, black

40-122

00-up FLST, 10-Gauge, chrome

40-123

00-up FLST, 10-Gauge, black

10-GAUGE EZ (1” SHORTER THAN STOCK) 40-124

97-07 FLT, 10-Gauge, chrome

40-125

97-07 FLT, 10-Gauge, black

Radius EZ for FLT / FLST

40-144

08-13 FLT, 10-Gauge, chrome

40-145

08-13 FLT, 10-Gauge, black

40-126

14-up FLT, 10-Gauge, chrome

40-127

14-up FLT, 10-Gauge, black

40-128

00-up FLST, 10-Gauge, chrome

40-129

00-up FLST, 10-Gauge, black

10-Gauge for FLT / FLST

37

SHIFT RODS A step above the traditional shift rod

    

Features specially designed spherical bearings hydraulically pressed in for a clean look, eliminating the need for heim joints CNC machined from 6061-T6 billet aluminum Available in a black anodize or chrome finish Designed to fit all HD ® models except FXD, FXR, and XL models with mid-controls Beveled and Deep Cut styled shift rods are available for Sportster 48 and XL models with forward controls DEEP CUT (TWIN CAM & M8) 19-931 Deep Cut Round, black 19-930 Deep Cut Round, chrome

DEEP CUT (SPORTSTER 48) 19-935

DEEP CUT ROUND

Deep Cut Round, black (for Sportster™ 48 only) Deep Cut Round, chrome (for Sportster™ 48 only)

19-934

DEEP CUT FLAT 19-913

Deep Cut Flat, black

19-912

Deep Cut Flat, chrome

DEEP CUT FLAT

BEVELED (TWIN CAM & M8) 19-933

Beveled, black

19-932

Beveled, chrome

BEVELED (SPORTSTER 48) 19-937

Beveled, black (for Sportster™ 48 only) Beveled, chrome (for Sportster™ 48 only)

19-936

BEVELED

10-GAUGE (TWIN CAM & M8) 19-941

97-07 FLT, 10-Gauge, black

19-940

97-07 FLT, 10-Gauge, chrome

10-GAUGE

RETRO 19-938

Retro Round, chrome

19-939

Retro Round, black

RETRO ROUND

38

DEEP CUT FOOT CONTROL FAMILY PACK Save time and money dressing up your Touring model Each Deep Cut kit includes: Inner Shifter Lever, Brake Arm, Heel/Toe Shifter, and a Deep Cut Round Shifter Rod All accessories in the kit are machined from billet aluminum Available in chrome or black anodize nish Fits 14-up FLT models 91-110 Deep Cut, black 91-111 Deep Cut, chrome

    

91-110 Deep Cut, black

1-1/4” CLAMP-ON PEG MOUNT FOR CRASH BARS Chrome plated die-cast design Accepts male mount footpegs Sold in pairs 07-190 1-1/4” peg clamp

  

91-111 Deep Cut, chrome

3” EXTENSIONS FOR SOFTAIL ® CONTROLS Moves factory foot controls 3” forward to increase leg room Includes: black anodized billet aluminum adapter plates, extended stainless steel rear brake line, extended shifter rod, kickstand spring pin, bracket for 04-up models and necessary hardware EXTENSIONS 07-610 00-06 Softail ® 07-611 07-up Softail ® 07-616 11-up Softail ® w/ ABS ACCESSORIES 07-612 Replacement brake line 00-06 Softail ® 07-613 Replacement brake line 07-up Softail ® 07-617 Replacement brake line for 11-up Softail ® w/ ABS

 

07-190 Clamp on peg mount

07-610 3” Extensions for Softail ® models

39

Page 1 Page 2 Page 3 Page 4 Page 5 Page 6 Page 7 Page 8 Page 9 Page 10 Page 11 Page 12 Page 13 Page 14 Page 15 Page 16 Page 17 Page 18 Page 19 Page 20 Page 21 Page 22 Page 23 Page 24 Page 25 Page 26 Page 27 Page 28 Page 29 Page 30 Page 31 Page 32 Page 33 Page 34 Page 35 Page 36 Page 37 Page 38 Page 39 Page 40 Page 41 Page 42 Page 43 Page 44 Page 45 Page 46 Page 47 Page 48 Page 49 Page 50 Page 51 Page 52 Page 53 Page 54 Page 55 Page 56 Page 57 Page 58 Page 59 Page 60 Page 61 Page 62 Page 63 Page 64 Page 65 Page 66 Page 67 Page 68 Page 69 Page 70 Page 71 Page 72 Page 73 Page 74 Page 75 Page 76 Page 77 Page 78 Page 79 Page 80 Page 81 Page 82 Page 83 Page 84 Page 85 Page 86 Page 87 Page 88 Page 89 Page 90 Page 91 Page 92 Page 93 Page 94 Page 95 Page 96 Page 97 Page 98 Page 99 Page 100 Page 101 Page 102 Page 103 Page 104 Page 105 Page 106 Page 107 Page 108 Page 109 Page 110 Page 111 Page 112 Page 113 Page 114 Page 115 Page 116 Page 117 Page 118 Page 119 Page 120 Page 121 Page 122 Page 123 Page 124 Page 125 Page 126 Page 127 Page 128 Page 129 Page 130 Page 131 Page 132 Page 133 Page 134 Page 135 Page 136 Page 137 Page 138 Page 139 Page 140 Page 141 Page 142 Page 143 Page 144 Page 145 Page 146 Page 147 Page 148 Page 149 Page 150 Page 151 Page 152 Page 153 Page 154 Page 155 Page 156 Page 157 Page 158 Page 159 Page 160 Page 161 Page 162 Page 163 Page 164 Page 165 Page 166 Page 167 Page 168 Page 169 Page 170 Page 171 Page 172 Page 173 Page 174 Page 175 Page 176 Page 177 Page 178 Page 179 Page 180 Page 181 Page 182 Page 183 Page 184 Page 185 Page 186 Page 187 Page 188 Page 189 Page 190 Page 191 Page 192

tavernermotorsports.com.au

Made with FlippingBook flipbook maker