Sawing festoolcanada.com 101
100
Sawing
Tooth Shapes
Triple Chip—TC Trapezoidal flat tooth saw blade
Flat tooth saw blade - FT The edges of the teeth are straight, not slanted. Each tooth cuts in the same way. This tooth shape is used in saws for cutting steel and construction materials.
Alternating Top Bevel—ATB Offset tooth saw blade The teeth on this saw blade cut alternately to the left and right. The alternate tooth saw blade is a universal blade for all types of wood.
This blade features trapezoidal teeth with beveled edges on both sides that alternate with flat teeth when cutting. Ideal for hard plastic and materials with hard coatings.
Thin Cutting Saw Blades The new saw blade geometry allows users to work faster and for longer, the new teeth shapes provide an improved cutting performance and the new carbide results in an extended service life, while maintaining a consistent cutting quality. Up to 100% faster cutting, 40% longer blade life, 20% less dust and material waste.
HK 55 / HKC 55 TS 55 F / TSC 55 K
TS 60 / TSV 60 CSC SYS 50
TS 55 R / TSC 55
TS 75
Kerf : .070 in (1.8 mm) Bore: 3/4” (20 mm) Teeth: 12 Chip Angle: 20° Hook Angle: - Diameter: 160 mm
Kerf: .125” (2.2 mm) Bore: 3/8” (20 mm) Teeth: 12 Chip Angle: 20° Hook Angle: - Diameter: 160 mm
Kerf: .070 in (1.8 mm) Bore: 3/4” (20 mm) Teeth: 16 Chip Angle: 20° Hook Angle: - Diameter: 168 mm
Kerf: 1/8” (2.6 mm) Bore: 1-3/16” (30 mm) Teeth: 16 Chip Angle: - Hook Angle: 28° Diameter: 210 mm
Panther Saw Blade For rapid working with low application of power, especially for rip cuts in solid wood. Suitable for hardwood and softwood.
Rip Cut
NEW
205770
495378
205559
496305
Kerf: .070 in (1.8 mm) Bore: 3/4” (20 mm) Teeth: 18 Chip Angle: 25° Hook Angle: - Diameter: 160 mm
Kerf: 1/8” (2.6 mm) Bore: 1-3/16” (30 mm) Teeth: 18 Chip Angle: - Hook Angle: 20° Diameter: 210 mm
Standard Saw Blade Coarse-cutting rip blade for use with building panels, wood and soft plastics.
Cross-Cut
500461
495379
Kerf: .070 in (1.8 mm) Bore: 3/4” (20 mm) Teeth: 28 Chip Angle: 15° Hook Angle: - Diameter: 160 mm
Kerf: .125” (2.2 mm) Bore: 6-1/4” (160 mm) Teeth: 28 Chip Angle: 15° Hook Angle: - Diameter: 160 mm
Kerf: .070 in (1.8 mm) Bore: 3/4” (20 mm) Teeth: 28 Chip Angle: 15° Hook Angle: - Diameter: 168 mm
Kerf: 1/8” (2.4 mm) Bore: 1-3/16” (30 mm) Teeth: 36 Chip Angle: - Hook Angle: 15° Diameter: 210 mm
Universal Saw Blade The all-rounder for working with all types of wood and wood materials, as well as building panels and soft plastics.
Cross-Cut
NEW
205771
495380
205560
496304
Kerf: .070 in (1.8 mm) Bore: 3/4” (20 mm) Teeth: 42 Chip Angle: 10° Hook Angle: - Diameter: 160 mm
Kerf: .125” (2.2 mm) Bore: 3/8” (20 mm) Teeth: 48 Chip Angle: 5° Hook Angle: - Diameter: 160 mm
Kerf: .070 in (1.8 mm) Bore: 3/4” (20 mm) Teeth: 42 Chip Angle: 10° Hook Angle: - Diameter: 168 mm
Kerf: 1/8” (2.4 mm) Bore: 1-3/16” (30 mm) Teeth: 52 Chip Angle: - Hook Angle: 8° Diameter: 210 mm
Trapezoidal Cross-Cut
Fine-Tooth Saw Blade The fine-cut saw blade for clean and splinter-free cross cuts in solid wood, laminated or veneered sheet materials and acrylic glass.
NEW
205772
495381
205561
495377
Kerf: .070 in (1.8 mm) Bore: 3/4” (20 mm) Teeth: 52 Chip Angle: -5° Hook Angle: - Diameter: 160 mm
Kerf: .125” (2.2 mm) Bore: 3/8” (20 mm) Teeth: 48 Chip Angle: 4° Hook Angle: - Diameter: 160 mm
Kerf: .070 in (1.8 mm) Bore: 3/4” (20 mm) Teeth: 52 Chip Angle: -5° Hook Angle: - Diameter: 168 mm
Kerf: 1/8” (2.4 mm) Bore: 1-3/16” (30 mm) Teeth: 60 Chip Angle: - Hook Angle: -4° Diameter: 210 mm
Trapezoidal Flat Tooth
Laminate/HPL Saw Blade Ideal for laminate and melamine-resin-bonded panels.
NEW
205773
495382
205562
496309
Kerf: 0.070 in (1.8 mm) Bore: 3/4” (20 mm) Teeth: 52 Chip Angle: -5° Hook Angle: - Diameter: 160 mm
Kerf: .070 in (1.8 mm) Bore: 3/4” (20 mm) Teeth: 52 Chip Angle: -5° Hook Angle: - Diameter: 168 mm
Flat Tooth with Variable Chamfer
Aluminum/Plastics Saw Blade Ideal for aluminum panels and profiles as well as for fiber- reinforced and hard plastics.
NEW
205563
205774
Kerf: .070 in (1.8 mm) Bore: 3/4” (20 mm) Teeth: 4 Chip Angle: - Hook Angle: - Diameter: 160 mm
Kerf: .125” (2.2 mm) Bore: 1” (20 mm) Teeth: 4 Chip Angle: - Hook Angle: - Diameter: 160 mm
Kerf: .070 in (1.8 mm) Bore: 3/4” (20 mm) Teeth: 4 Chip Angle: - Hook Angle: - Diameter: 168 mm
Abrasive Materials Saw Blade The solution for cement-bonded and gypsum bonded chipboard and fiberboard.
Flat Tooth
NEW
205775*
205564
202958
*Not recommended for CSC SYS 50
Made with FlippingBook - Online catalogs