2023 Festool Canada Product Catalog (English)

Router festoolcanada.com 135

134

Router

OF 1010 Accessories Guide Stop Adapt routers to Guide Rails for perfectly guided cuts. Slot in base engages rib on Guide Rail. Fine Adjustment Quick and precise adjustment when using router with Guide Stop (488 752) or edging plate. Allows for 1/256” (1/10 mm) fine adjustment. Edge Guide Stable guidance for accurate grooves, flutes, dados, rabbets and more. Includes Guide Rods (495 247); does not include Dust Hood (437 307). Fine Adjuster Quick and precise adjustment when using router with Guide Stop (488 752) or Edging Plate. Allows for 1/256” (1/10 mm) fine adjustment. (Shown attached to Edge Guide (489 427), not included) Chip Catcher Swiveling Chip Catcher deflects chips and dust in edge-forming operations, further enhancing dust extraction efficiency. Hard Fiber Base Runner Customize the solid base piece hole diameter with a plunge bit to meet your needs. Provides support across the entire surface of the router base. Ideal for working with smaller diameter bits especially for greater support on outside corners. Does not have the center bore. Trammel Unit Rout circles and decorative curves up to 29-7/8” (760 mm) in diameter.

OF 1010 Accessories Hole Drilling Set

488752

583290

Includes LR 32 Guide Plate with mandrel (494 340), two side fences consisting of edge stop (485 758) and sliding stop flag (485 759). Packaged in a box. Guide Rail, clamps, and bits sold separately. Guide Plate Includes centering mandrel (492 187). Guide Rail, clamps, bits, and side fences sold separately. Edge Guide Set Guide Rails a specific distance from edge. Integrated ruler and adjustable stops. For use with the LR 32 system. Includes stop and sliding stop flag (485 759). Guide Rail Index Accurately place shelf pin holes and European hardware based on the 32 mm system using the stop to set the distance from the end. Also used to calibrate LR 32 rails to be joined together for taller workpieces. (2 pieces) Dowel Drill Bit - Brad-Point Brad-point style bit for stopped holes for shelf pins and hardware installation. Dowel Drill Bit - Spear-Point Spear-point bit for through holes for shelf pins or hardware installation.

488754

494340

489427

485758

483358

496938

493180

491066

489229

491064

Euro-Hinge Boring Bit 35 mm Flat-bottom cutting bit for recessed cup-style hinges. 20mm Forstner Bit 20 mm Flat-bottom cutting bit for recessed cup-style hinges.

491077

483922

491072

Collet 1/4” collet with nut 8 mm collet with nut Template 10.8 mm OD / 9 mm ID 13.8 mm OD / 11 mm ID 17 mm OD / 15 mm ID 24 mm OD / 21 mm ID 27 mm OD / 25 mm ID 30 mm OD / 27 mm ID 40 mm OD / 37 mm ID

488761 488755

486029 484176 486030 486031 486032 486033 486034

Guide Rails for the LR 32 Hole Drilling System Guide Rail indexed with a series of holes for 32 mm spacing. Hole drilling set sold separately. FS 1400/2 - LR32 Guide Rail Length: 55” (1,400 mm) 496939

491622

FS 2424/2 - LR32 Guide Rail Length: 95-13/32” (2,424 mm)

Centering Mandrel Center guide bushings and the LR 32 plate to the collet for accurate routing results. Works with 1/4” and 8 mm collets.

492187

Made with FlippingBook - Online catalogs