COPINGS
Aluminium
Copings
COMPATIBILITY Aluminium should be protected from materials which may cause electrolytic corrosion, such as cement based products.
The Trueline coping system provides a cost effective and easily installed finish to parapet walls.
KEY FEATURES n No visible fixing.
LIGHTNING CONDUCTING Aluminium is a suitable material for use within a lightning protection system.
n Installation is quick, not requiring any specialist tools. n The fixing strap allows venting to the top of the wall. n Maintenance free. n Flexible as they can be designed to fit most situations. FINISH The copings can be polyester powder coated to a colour of your choice. FIXING The 3mm aluminium retaining straps must be securely fixed to the top of the wall at specified centres. A high strength gap filling adhesive is applied to the top of the retaining clips. The coping is then firmly pressed down over the retaining straps and clicked into place. The copings are then joined together with a joint clip and silicon sealed in place on site. Ensure when fixing that a gap of 3-6mm is left between lengths, in a continuous run, to allow for the thermal expansion of aluminium (23 x 10 -6 mm per ºC)
ACCESSORIES
STRAIGHT LENGTHS
90 deg. ANGLES 100mm inside leg dim.
STOP END OR CLOSURE 100mm long
90 deg. TEE JUNCTIONS 100mm inside leg dim.
FIXING CLIP 75mm wide.
STOP END UPSTAND 100mm long
19
Made with FlippingBook - professional solution for displaying marketing and sales documents online