COMPRESSION JOINTS
Aluminium
Full system compression joint
Trueline’s Full System Compression Joint is ideally suited for insulated systems. Both the top and base sections are manufactured from aluminium and adjacent sections are joined together with a joint clip. With the full system compression joint the top and bottom section are fixed back to the wall. Again this compression joint can be supplied with fully welded corners and end caps ensuring no breaks within the system. The gap has an EPDM foam strip applied to the lower section to ensure that water cannot be driven back into the system. The upper section is supplied mill finish but the lower section can be powder coated to a colour of your choice. This system allows for a number of render thicknesses and this must be specified when ordering. When ordering the top and base sections are supplied together as a set.
Full system compression
Full system compression ext corner
Full system compression int corner
Drip (mm)
6
TEP-FC-SIZE-D6-P-A-25-Colour
TEP-FCEC-SIZE-D6-P-A-25-Colour TEP-FCIC-SIZE-D6-P-A-25-Colour
8
TEP-FC-SIZE-D8-P-A-25-Colour
TEP-FCEC-SIZE-D8-P-A-25-Colour TEP-FCIC-SIZE-D8-P-A-25-Colour
10 TEP-FC-SIZE-D10-P-A-25-Colour TEP-FCEC-SIZE-D10-P-A-25-Colour TEP-FCIC-SIZE-D10-P-A-25-Colour 15 TEP-FC-SIZE-D15-P-A-25-Colour TEP-FCEC-SIZE-D15-P-A-25-Colour TEP-FCIC-SIZE-D15-P-A-25-Colour
23
Made with FlippingBook - professional solution for displaying marketing and sales documents online