Tel: 0208 400 2020
19
FirmJoint JennyCaliper
SpringDividers
LargeBase SURFACE GAUGE with2Pillars
• Solid nut style • Easy adjustment over entire range • Balanced legs with uniform tension • Polished natural steel finish. • Overall Length: 150mm Maximum Opening: 100mm • Overall Length: 200mm Maximum Opening: 150mm • Overall Length: 250mm Maximum Opening: 210mm
• Firm Joint Jenny Caliper • Also known as “Odd Leg” or “Hermaphrodite” • Caliper Suitable for scribing lines parallel to the edge of a work piece. • Polished natural steel finish. • Overall Length: 115mm Maximum Opening: 175mm
Order Code
Description/ Size
List Price £9.00 £10.80 £13.00
Offer Price £6.30 £7.50 £9.10
Order Code 8455-444
Description/Size FirmJoint Jenny Caliper
100mm 150mm 210mm
8122-444 8122-666 8122-888
List Price £8.70
Offer Price £6.10
ExternalSpringCaliper 160mm
InternalSpringCaliper 170mm
• Hardened and ground base • Ground vee groove in base for mounting on cylindrical work • Retractable pins provided in the base for work against edge of flat surface • 4mm double ended scriber with hardened points for marking out • Will also hold 6mm spigots • Fine adjustment of spindle may be made at any angle above or below the base
• External Spring Caliper • Solid nut style
• Solid nut style • Easy adjustment over entire range • Balanced legs with uniform tension • Polished natural steel finish • Overall Length: 175mmMinimumOpening: 13mm MaximumOpening: 170mm
• Easy adjustment over entire range • Balanced legs with uniform tension • Polished natural steel finish. • Overall Length: 180mm • Maximum Opening: 160mm
• Base Size: 2 x 63 x 27.5 • Pillar 1 length: 225mm • Pillar 1 length: 300mm
Order Code 5035-300
Description/Size Surface Gauge
Order Code 8344-666
Description/Size External Spring Caliper
Order Code 8233-666
Description/Size Internal Spring Caliper
List Price £58.60
Offer Price £41.00
List Price £10.80
List Price £10.80
Offer Price £7.50
Offer Price £7.50
6PieceAdjustableParallelSet PARALLEL SET
ChuckTypeTapWrenches ACCESSORIES
• T-handles slide both ways for tightening • Hardnened & tempered split collet chucks for positive grip • Knurled & hardened clamping nut • Spring tension holds handle in desired position • Wrench body has machined centre for use with lathe centres
• Consists of Two Precision Ground Pieces which Slide Smoothly on Each Other • Locked into Position by Set Screws • Supplied in Vinyl Pouch • Inch / Metric • 6 Piece Set includes sizes: 3/8” - 1/2” 1/2” - 11/16”
Order Code
Jaw Type
Tap Size (mm) 1.5 - 4.0
Tap Size (Inch)
A/F Range
Price Each
Offer Price £5.95
Order Code S-110-6
Description/Size 6 Piece Parallel Set
4311-211 Solid
1/16-5/32” 2.5-4mm £8.50
11/16” - 15/16” 5/16” - 1-5/16” 1-5/16” - 1-3/4” 1-3/4” - 2-1/4”
4311-226 Ratchet 4.0 - 6.25 5/32-1/4” 3-5mm
£21.95 £15.35 £27.30 £19.10
List Price £88.00
Offer Price £61.60
4311-236 Ratchet 6.25 - 12.50 1/4-1/2”
5-7mm
Made with FlippingBook Annual report maker